Wraps by car

Haima S5 wrap

The Haima S5 wrap page covers the first generation of this compact SUV, produced from 2014 to now. A full vinyl wrap of this body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) more, about 66 ft (20 m) in total.

1generations18 mof film for a full wrap

Haima S5, first generation, factory photo
Haima S5, first generation. Factory color shown.

Haima S5 wrap colors and ideas

  • Haima S5 black wrap
  • Haima S5 white wrap
  • Haima S5 gray wrap
  • Haima S5 silver wrap
  • Haima S5 red wrap
  • Haima S5 blue wrap
  • Haima S5 green wrap
  • Haima S5 yellow wrap
  • Haima S5 orange wrap
  • Haima S5 purple wrap
  • Haima S5 pink wrap
  • Haima S5 teal wrap
  • Haima S5 brown wrap
  • Haima S5 gold wrap
  • Haima S5 chrome wrap
  • Haima S5 color shift wrap
  • Haima S5 carbon fiber wrap
  • Haima S5 camo and patterned wrap

How much vinyl to wrap a Haima S5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowSUV (5 doors)171.6 in (4,358 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Haima S5 wrap cost factors

The Haima S5 wrap cost depends on the film type, the size of the body, and the installer's labor. This compact SUV is 171.6 in (4,358 mm) long and needs about 59 ft (18 m) of 60-inch film, so material use is a key factor. Chrome or patterned film adds about 7 ft (2 m) more, raising the material amount. The number of cut-outs, like the tailgate glass, also affects labor time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Haima S5 wraps by generation

Swipe sideways. Tap a card for the full description.

Haima S5, first generation, factory photo
Factory color shown

2014–now Haima S5 SUV (first generation)

2014–nowSUV (5 doors)171.6 in (4,358 mm)

The first-generation Haima S5 is a compact SUV that is 171.6 in (4,358 mm) long. This size means the wrap uses about 59 ft (18 m) of film because the body has a normal number of panels for a five-door SUV. The tailgate with its integrated glass adds one more trim point for the installer.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Haima S5

A partial wrap on a Haima S5 can cover the roof, the hood, or the mirror caps as smaller color changes. Chrome delete is done on the window trim and badges, using black film to change their look. Paint protection film (PPF) can be applied as a clear film on the front end to protect against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Haima S5: body, cut-outs and film

The Haima S5 vinyl wrap is a five-door SUV with a length of 171.6 in (4,358 mm). A compact SUV like this has fewer large flat panels than a full-size truck or van, so film use stays moderate. Wrapping the roof, hood, and all body sides requires the full 59 ft (18 m) estimate. The tailgate includes the rear glass, so the installer must trim film to the glass edge.

Haima S5 wrap ideas often focus on the tailgate, which has the rear glass set into it. The film ends at the edge of the glass, so the rear hatch needs a precise cut-out. Door handles, mirrors, and badges are removed for a clean install. You can also cover the bright trim with black film, a process called chrome delete.

Knowing how much vinyl to wrap a Haima S5 starts with the single generation from 2014–now. This body style has stayed consistent, so no generation-based size changes affect the film quantity. The only body offered is a five-door SUV, so the estimate of 59 ft (18 m) applies across all production years.

Questions about wrapping a Haima S5

How much vinyl does it take to wrap a Haima S5?

A Haima S5 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, plan for about 66 ft (20 m). This estimate fits the five-door SUV body of the first generation.

Can I wrap only the hood or the roof of a Haima S5?

Yes, you can wrap only the hood or the roof of a Haima S5. A partial wrap on this car often covers the roof, the hood, or the mirror caps. It is a smaller job than a full wrap and uses less film.

Is a Haima S5 hard to wrap?

A Haima S5 is not especially hard to wrap, but the tailgate adds work because the rear glass is set into it. The installer must cut the film exactly at the edge of the glass. At 171.6 in (4,358 mm) long, it is a standard compact SUV with no extreme curves.

How many generations of the Haima S5 does this page cover?

This page covers one generation of the Haima S5, the first generation, produced from 2014–now. There is only one body style, a five-door SUV, and that is the only generation in this catalog.