Wraps by car

Haima M3 wrap

A Haima M3 wrap uses vinyl wrap to change the color or protect the paint of this compact sedan. The catalog covers one generation, produced from 2014 to 2019. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

1generations17 mof film for a full wrap

Haima M3, first generation, factory photo
Haima M3, first generation. Factory color shown.

Haima M3 wrap colors and ideas

  • Haima M3 black wrap
  • Haima M3 white wrap
  • Haima M3 gray wrap
  • Haima M3 silver wrap
  • Haima M3 red wrap
  • Haima M3 blue wrap
  • Haima M3 green wrap
  • Haima M3 yellow wrap
  • Haima M3 orange wrap
  • Haima M3 purple wrap
  • Haima M3 pink wrap
  • Haima M3 teal wrap
  • Haima M3 brown wrap
  • Haima M3 gold wrap
  • Haima M3 chrome wrap
  • Haima M3 color shift wrap
  • Haima M3 carbon fiber wrap
  • Haima M3 camo and patterned wrap

How much vinyl to wrap a Haima M3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2019sedan (4 doors)178.9 in (4,545 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Haima M3 wrap cost factors

Haima M3 wrap cost depends on the size of the car, the amount of film and the time for cut-outs. The body is 178.9 in (4,545 mm) long and needs about 56 ft (17 m) of film for a full color change. If your trim has parking sensors or fog lamps, the installer adds time for cutting around them.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Haima M3 wraps by generation

Swipe sideways. Tap a card for the full description.

Haima M3, first generation, factory photo
Factory color shown

2014–2019 Haima M3 sedan (first generation)

2014–2019sedan (4 doors)178.9 in (4,545 mm)

The first generation Haima M3 was built from 2014 to 2019 and is the only body in the catalog. The 2016 restyling changed the bumpers and lights, so film cut for one version does not fit the other. If you own a 2014 or 2015 car, tell the installer it is the pre-facelift shape.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Haima M3

A partial wrap on a Haima M3 can cover the roof, hood or mirror caps. A chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Haima M3: body, cut-outs and film

A Haima M3 vinyl wrap covers the four-door sedan body, which is 178.9 in (4,545 mm) long. The compact size means the roof, hood and doors are straightforward panels for an experienced installer. The bumpers and sills have the usual curves but no extreme contours that complicate film application.

For Haima M3 wrap ideas, think about which parts need extra work. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Some trims have fog lamps in the front bumper, so the bumper film needs cut-outs.

To know how much vinyl to wrap a Haima M3, you count the same panels regardless of the year. The catalog lists one generation with a restyling in 2016, but the main body dimensions stay the same. The estimate of about 56 ft (17 m) of cast film applies to the full body of any 2014 to 2019 model.

Questions about wrapping a Haima M3

How much vinyl does it take to wrap a Haima M3?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Haima M3. That is the estimate for a full color change wrap on the newest body. If you choose chrome or patterned film, plan for about 64 ft (19.5 m).

Which years of the Haima M3 take the same film cuts?

The Haima M3 was made from 2014 to 2019, but the same film cuts do not fit all years. The 2016 restyling changed the bumpers and lights. You need film cut for the pre-2016 or post-2016 version depending on your car.

Can I wrap only the hood or the roof of a Haima M3?

Yes, you can wrap only the hood or the roof of a Haima M3. Partial wraps are a smaller job than a full body wrap. You can also choose mirror caps, a chrome delete for the trim, or clear PPF on the front end.

Is a Haima M3 hard to wrap?

A Haima M3 is not a hard car to wrap, but two features add work. Some trims have parking sensors in the bumpers that need cuts around each sensor. Some trims have fog lamps in the front bumper that need cut-outs in the film.