Wraps by car

Haima Family wrap

The Haima Family wrap page covers two generations of this sedan built from 2000 to 2012. The second generation ran from 2006 to 2012 and received a restyling in 2010. A full vinyl wrap on the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

2generations15 mof film for a full wrap

Haima Family, second generation, factory photo
Haima Family, second generation. Factory color shown.

Haima Family wrap colors and ideas

  • Family black wrap
  • Family white wrap
  • Family gray wrap
  • Family silver wrap
  • Family red wrap
  • Family blue wrap
  • Family green wrap
  • Family yellow wrap
  • Family orange wrap
  • Family purple wrap
  • Family pink wrap
  • Family teal wrap
  • Family brown wrap
  • Family gold wrap
  • Family chrome wrap
  • Family color shift wrap
  • Family carbon fiber wrap
  • Family camo and patterned wrap

How much vinyl to wrap a Haima Family

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2012sedan (4 doors)175.8 in (4,466 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
2000–2006sedan (4 doors)175.8 in (4,466 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Family wrap cost factors

Family wrap cost depends on the amount of film, the body condition, and the labor for a four-door sedan. The car needs about 49 ft (15 m) of film for a full wrap, plus extra for the 2010 restyled bumpers. Removing trim and repairing paint defects before wrapping also increase the total.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Family wraps by generation

Swipe sideways. Tap a card for the full description.

Haima Family, second generation, factory photo
Factory color shown

2006–2012 Family sedan (second generation)

2006–2012sedan (4 doors)175.8 in (4,466 mm)

The second generation Haima Family was restyled in 2010. Bumpers and lights changed, so film cut for one version does not fit the other. An installer must use the correct template for the 2006–2009 cars or the 2010–2012 cars.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Haima Family, first generation, factory photo
Factory color shown

2000–2006 Family sedan (first generation)

2000–2006sedan (4 doors)175.8 in (4,466 mm)

The first generation Haima Family from 2000 to 2006 needs careful paint inspection before wrapping. On a car of these years panels may be original or repainted. A test spot comes before a full wrap to check how the vinyl adheres to the existing paint.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Family

A partial wrap on the Haima Family can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges can be covered with black film. Paint protection film (PPF) is also an option, with clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Haima Family: body, cut-outs and film

The Haima Family vinyl wrap job starts with its four-door sedan body of 175.8 in (4,466 mm). Both generations share that length, so the amount of film for a full wrap stays the same. The only factory body style is a sedan, which keeps the panel count consistent between years.

Family wrap ideas must account for the door handles, mirrors, and badges that create extra cut-outs. The front and rear bumpers need relief cuts or heat forming to follow their curves. On the 2010 restyled second generation, the new bumper and light shapes change the templates from earlier cars.

How much vinyl to wrap a Family depends on the generation and the film type. For solid color, both generations need about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 61 ft (18.5 m) because the pattern must be matched across panels.

Questions about wrapping a Haima Family

How much vinyl does it take to wrap a Haima Family?

Yes, a full Haima Family wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 61 ft (18.5 m) because of pattern matching.

Which years of the Family take the same film cuts?

The first generation 2000–2006 and the second generation 2006–2012 have different film cuts. Within the second generation, the 2010 restyling changed bumpers and lights, so 2006–2009 cuts differ from 2010–2012 cuts.

Can I wrap only the hood or the roof of a Family?

Yes, you can wrap only the hood or the roof of a Haima Family. A partial wrap may also include mirror caps, or a chrome delete on window trim and badges.

Is a Family hard to wrap?

A Haima Family is not especially hard to wrap, but its age and body details add work. The four-door sedan has simple panels, but the 2010 restyled bumpers require more forming. If the paint is original or repainted, an adhesion test is necessary before the full wrap.