Wraps by car

Honda 145 wrap

A Honda 145 wrap changes the look of this small 1972–1974 coupe or sedan with vinyl film. The catalog covers one generation of the Honda 145. A full wrap of the coupe body takes about 41 feet (12.5 meters) of 60-inch (1.52 meters) cast film. The sedan body needs about 44 feet (13.5 meters) of the same film.

1generations12.5 mof film for a full wrap

Honda 145, first generation, factory photo
Honda 145, first generation. Factory color shown.

Honda 145 wrap colors and ideas

  • Honda 145 black wrap
  • Honda 145 white wrap
  • Honda 145 gray wrap
  • Honda 145 silver wrap
  • Honda 145 red wrap
  • Honda 145 blue wrap
  • Honda 145 green wrap
  • Honda 145 yellow wrap
  • Honda 145 orange wrap
  • Honda 145 purple wrap
  • Honda 145 pink wrap
  • Honda 145 teal wrap
  • Honda 145 brown wrap
  • Honda 145 gold wrap
  • Honda 145 chrome wrap
  • Honda 145 color shift wrap
  • Honda 145 carbon fiber wrap
  • Honda 145 camo and patterned wrap

How much vinyl to wrap a Honda 145

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1974coupe, sedan (2 or 4 doors)157.3 in (3,995 mm) to 163.0 in (4,140 mm)about 41 ft (12.5 m) for the coupe to 44 ft (13.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Honda 145 wrap cost factors

A Honda 145 wrap cost is driven by the size of the car and the film you pick. The body needs about 41 feet (12.5 meters) for the coupe or 44 feet (13.5 meters) for the sedan. A chrome or patterned film can push the amount to about 54 feet (16.5 meters) because of the extra trimming. The more intricate the film design, the more time and material the job takes.

  • Film for a full wrap: about 41 ft (12.5 m) for the coupe to 44 ft (13.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Honda 145 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda 145, first generation, factory photo
Factory color shown

1972–1974 Honda 145 coupe, sedan (first generation)

1972–1974coupe, sedan (2 or 4 doors)157.3 in (3,995 mm) to 163.0 in (4,140 mm)

The first generation Honda 145 was sold from 1972 to 1974 as a coupe or sedan. The body style decides the panel plan and the film amount for a wrap. The coupe has fewer doors and a shorter rear section than the sedan. That gives the coupe a slightly lower film estimate than the sedan.

Film: about 41 ft (12.5 m) for the coupe to 44 ft (13.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Honda 145

A partial wrap on a Honda 145 is a smaller job than covering the whole car. You can wrap just the roof, hood, or mirror caps to change a section of the car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is a clear option to guard the nose of this classic body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda 145: body, cut-outs and film

A Honda 145 vinyl wrap has to follow the body's short subcompact shape. The coupe and sedan run from 157.3 inches (3,995 mm) to 163.0 inches (4,140 mm) long. That small size means fewer large flat panels than on a bigger car. The two-door coupe and four-door sedan differ enough that each needs its own film estimate.

Honda 145 wrap ideas work best when you plan for the car's details. The window trim and badges call for cut-outs or removal before the film goes on. Door handles and mirrors also need careful trimming or taking off the car. Leaving these parts in place can cause lifting edges and a less clean finish.

How much vinyl to wrap a Honda 145 depends on the body style you choose. The coupe takes about 41 feet (12.5 meters) of 60-inch (1.52 meters) cast film. The sedan takes about 44 feet (13.5 meters) of the same width. Ordering extra for mistakes or future repairs is a sensible step with one short run of this model.

Questions about wrapping a Honda 145

How much vinyl does it take to wrap a Honda 145?

It takes about 41 feet (12.5 meters) of 60-inch (1.52 meters) cast film to wrap a Honda 145 coupe. The sedan body takes about 44 feet (13.5 meters) of the same film. These figures assume a standard color change wrap with no extra chrome or pattern work.

Which Honda 145 body takes more film?

The sedan body takes more film than the coupe to wrap a Honda 145. The sedan uses about 44 feet (13.5 meters) of 60-inch (1.52 meters) cast film. The coupe uses about 41 feet (12.5 meters), so the sedan needs about three extra feet of film.

Can I wrap only the hood or the roof of a Honda 145?

Yes, you can wrap only the hood or the roof of a Honda 145. A partial wrap is a smaller option that covers just one or a few panels. The hood is a good single panel to change the look of the front. The roof is another simple section that uses much less film than a full wrap.

Is a Honda 145 hard to wrap?

A Honda 145 is not too hard to wrap, but its age and small size add some work. The window trim and badges need cut-outs or removal for a clean install. The short panels are easy to handle, but curved sections like the fenders take more patience. Planning for the trim and using a cast film helps the job go smoothly.