Wraps by car

Honda Acty wrap

The Honda Acty wrap page covers the mini van built from 1999 to 2021. This catalog entry covers one generation of the Acty. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Honda Acty, third generation, factory photo
Honda Acty, third generation. Factory color shown.

Honda Acty wrap colors and ideas

  • Acty black wrap
  • Acty white wrap
  • Acty gray wrap
  • Acty silver wrap
  • Acty red wrap
  • Acty blue wrap
  • Acty green wrap
  • Acty yellow wrap
  • Acty orange wrap
  • Acty purple wrap
  • Acty pink wrap
  • Acty teal wrap
  • Acty brown wrap
  • Acty gold wrap
  • Acty chrome wrap
  • Acty color shift wrap
  • Acty carbon fiber wrap
  • Acty camo and patterned wrap

How much vinyl to wrap a Honda Acty

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2021van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Acty wrap cost factors

The Acty wrap cost depends on the film finish, the condition of the paint, and how much of the body is covered. The small size needs about 51 ft (15.5 m) of film for a full wrap. Chrome or patterned film raises material use to about 57 ft (17.5 m). Extra labor for the sliding door tracks also influences the final figure.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Acty wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Acty, third generation, factory photo
Factory color shown

1999–2021 Acty van (third generation)

1999–2021van (5 doors)133.7 in (3,395 mm)

The third generation Honda Acty is a mini van offered from 1999 to 2021 with five doors. Its compact panel size keeps a full wrap to about 51 ft (15.5 m) of standard cast film. The sliding side doors require the film to be cut along the tracks. The tracks stay bare so the doors continue to slide freely.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Acty

A partial wrap on the Honda Acty covers the roof, hood, or mirror caps. An Acty chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs leave the main bodywork uncovered.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Acty: body, cut-outs and film

The Honda Acty vinyl wrap follows the compact dimensions of this mini van. The body is 133.7 in (3,395 mm) long and comes as a five-door van. The small footprint means fewer square meters of film than on a full-size model. Precise cutting is still needed around the roof and panel edges.

Acty wrap ideas must respect the sliding side doors. The door tracks stay bare, and the film is cut along them. Cut-outs are kept tight so the doors keep sliding without catching the vinyl. The sliding door mechanism adds a detail step to the installation.

How much vinyl to wrap an Acty depends on the chosen finish. A full wrap with standard cast film needs about 51 ft (15.5 m) of 60-inch (1.52 m) material. Chrome or patterned film runs closer to 57 ft (17.5 m) because of matching and waste. The third generation stayed the same size through its production run.

Questions about wrapping a Honda Acty

How much vinyl does it take to wrap a Honda Acty?

A full Honda Acty wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 57 ft (17.5 m) because of pattern matching and extra waste. The figures apply to the third generation van body from 1999 to 2021.

Are the sliding doors of an Acty wrapped?

The sliding doors of an Acty are wrapped on the outer panels. The door tracks stay bare, and the film is cut along them. This keeps the doors moving freely and prevents the vinyl from peeling. The installer trims the film close to the track edge.

Can I wrap only the hood or the roof of an Acty?

Yes, you can wrap only the hood or the roof of an Acty. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

Is an Acty hard to wrap?

An Acty is not hard to wrap for an experienced installer, but the sliding doors add work. The door tracks stay bare, so the film must be cut along them. The compact size of 133.7 in (3,395 mm) means fewer seams but tighter curves on the roof. Careful trimming around the tracks is the main extra step.