Wraps by car

Honda Airwave wrap

The Honda Airwave wrap page covers the first generation of this subcompact wagon, sold from 2005 to 2010. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film in a solid color. Choosing a chrome or patterned film raises the amount to about 67 ft (20.5 m). The Airwave is a five-door wagon with a tailgate that includes the rear glass.

1generations18 mof film for a full wrap

Honda Airwave, first generation, factory photo
Honda Airwave, first generation. Factory color shown.

Honda Airwave wrap colors and ideas

  • Airwave black wrap
  • Airwave white wrap
  • Airwave gray wrap
  • Airwave silver wrap
  • Airwave red wrap
  • Airwave blue wrap
  • Airwave green wrap
  • Airwave yellow wrap
  • Airwave orange wrap
  • Airwave purple wrap
  • Airwave pink wrap
  • Airwave teal wrap
  • Airwave brown wrap
  • Airwave gold wrap
  • Airwave chrome wrap
  • Airwave color shift wrap
  • Airwave carbon fiber wrap
  • Airwave camo and patterned wrap

How much vinyl to wrap a Honda Airwave

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2010wagon (5 doors)171.3 in (4,350 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Airwave wrap cost factors

Airwave wrap cost depends on the amount of film, the film type, and the labor for the tailgate and the 2008 restyling differences. The car needs about 59 ft (18 m) of solid film or about 67 ft (20.5 m) of chrome or patterned film, and more complex film adds cost. The tailgate with the rear glass in it requires careful cutting, which increases labor time. The restyling in 2008 means the installer must use the correct film cuts for the bumpers and lights, and that may affect the quote.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2008: bumpers and lights differ between the versions, and so do the film cuts.

Airwave wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Airwave, first generation, factory photo
Factory color shown

2005–2010 Airwave wagon (first generation)

2005–2010wagon (5 doors)171.3 in (4,350 mm)

The first generation Honda Airwave ran from 2005 to 2010 and received a restyling in 2008. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. An installer must check the production year before cutting the front and rear bumper pieces. The door and roof panels stayed the same enough that the overall film estimate remains the same.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Airwave

A partial wrap on the Honda Airwave can cover the roof, hood, or mirror caps separately. An Airwave chrome delete wraps the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film that can be applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and are good for accent changes or protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Airwave: body, cut-outs and film

A Honda Airwave vinyl wrap is a full color change on a compact five-door wagon that is 171.3 in (4,350 mm) long. The single body style keeps the panel count predictable because the roof, hood, and large side surfaces are all straightforward. The tailgate is the main area to measure carefully since the film stops at the edge of the rear glass. The restyling in 2008 did not change the basic dimensions, so the same film estimate applies to all years.

Airwave wrap ideas work best when you treat the tailgate as one piece with a cut-out for the rear glass. The film on the tailgate ends at the edge of the glass, so the installer trims it neatly around the window. Other parts that need cut-outs are the door handles, mirrors, and the front grille. The rear badges and the window trim may come off for a clean finish, and they can be wrapped separately for a chrome delete.

How much vinyl to wrap an Airwave depends on the film type, because solid colors need less material than chrome or patterned options. Solid 60-inch (1.52 m) cast film requires about 59 ft (18 m), while chrome or patterned film requires about 67 ft (20.5 m). The first generation has only one body style, so there is no extra length for a different shape. The 2008 restyling changed the bumpers and lights, but the overall panel area stays close to the same.

Questions about wrapping a Honda Airwave

How much vinyl does it take to wrap a Honda Airwave?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Honda Airwave in a solid color. If the wrap uses a chrome or patterned film, the amount goes up to about 67 ft (20.5 m). These figures are for the first generation wagon body. The tailgate with the rear glass in it does not add film beyond that estimate.

Which years of the Airwave take the same film cuts?

The Airwave takes the same film cuts for the years 2005 to 2007 and for the years 2008 to 2010. A restyling in 2008 changed the bumpers and lights, so film cut for one version does not fit the other. The lower body panels and the tailgate stayed compatible across all years.

Can I wrap only the hood or the roof of an Airwave?

Yes, you can wrap only the hood or the roof of an Airwave. A partial wrap can cover the roof, the hood, or the mirror caps. These jobs are smaller than a full wrap and still give a noticeable change. The installer will use the same film and methods as for a full wrap.

Is an Airwave hard to wrap?

An Airwave is not hard to wrap, but the tailgate adds work because the rear glass sits in it and the film must end at the edge of the glass. The car is a subcompact wagon at 171.3 in (4,350 mm) long, which means the panels are manageable. The 2008 restyling means the installer must match the correct bumper and light cuts for the year. Overall the shape is simple, with no sharp body lines that complicate the film.