Wraps by car

Honda Ballade wrap

The Honda Ballade wrap guide covers the subcompact sold as a hatchback and sedan from 1983 to 1987 and the earlier sedan from 1980 to 1983. The catalog lists 2 generations: the first built from 1980 to 1983 and the second from 1983 to 1987. A full vinyl wrap of the newest sedan body uses about 46 ft (14 m) of 60-inch (1.52 m) film.

2generations14 mof film for a full wrap

Honda Ballade, second generation, factory photo
Honda Ballade, second generation. Factory color shown.

Honda Ballade wrap colors and ideas

  • Ballade black wrap
  • Ballade white wrap
  • Ballade gray wrap
  • Ballade silver wrap
  • Ballade red wrap
  • Ballade blue wrap
  • Ballade green wrap
  • Ballade yellow wrap
  • Ballade orange wrap
  • Ballade purple wrap
  • Ballade pink wrap
  • Ballade teal wrap
  • Ballade brown wrap
  • Ballade gold wrap
  • Ballade chrome wrap
  • Ballade color shift wrap
  • Ballade carbon fiber wrap
  • Ballade camo and patterned wrap

How much vinyl to wrap a Honda Ballade

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1987hatchback, sedan (3 or 4 doors)144.7 in (3,675 mm) to 163.8 in (4,160 mm)about 43 ft (13 m) for the hatchback to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1980–1983sedan (4 doors)161.2 in (4,095 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Ballade wrap cost factors

Ballade wrap cost depends mainly on the body style, the amount of film and the labor for the chosen finish. A second generation hatchback uses about 43 ft (13 m) of 60-inch (1.52 m) film, while a sedan takes about 46 ft (14 m), and chrome or patterned film for either can need up to about 57 ft (17.5 m). The age of the car also matters because paint correction before wrapping adds labor on a 1980–1987 Ballade. Partial jobs like a hood or roof wrap cost less than a full wrap because they use less film and fewer hours.

  • Film for a full wrap: about 43 ft (13 m) for the hatchback to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: hatchback, sedan (3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Ballade wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Ballade, second generation, factory photo
Factory color shown

1983–1987 Ballade hatchback, sedan (second generation)

1983–1987hatchback, sedan (3 or 4 doors)144.7 in (3,675 mm) to 163.8 in (4,160 mm)

The second generation Honda Ballade was produced from 1983 to 1987 in hatchback and sedan forms, with three or four doors. The hatchback measures 144.7 in (3,675 mm) in its shortest form and the sedan reaches 163.8 in (4,160 mm), so the sedan body is the longer panel plan. A full wrap of the second generation hatchback takes about 43 ft (13 m) of 60-inch (1.52 m) cast film, and the sedan takes about 46 ft (14 m). The hatchback has a tailgate with the rear glass in it, which is wrapped only up to the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the hatchback to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Honda Ballade, first generation, factory photo
Factory color shown

1980–1983 Ballade sedan (first generation)

1980–1983sedan (4 doors)161.2 in (4,095 mm)

The first generation Honda Ballade was sold from 1980 to 1983 as a four-door sedan only. A car of this age may still have original paint or a repainted panel, so a test spot of film on each panel checks adhesion before the full wrap. The body is 161.2 in (4,095 mm) long, which is close to the second generation sedan length. A full wrap of this first generation sedan takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) if the film is chrome or patterned.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Ballade

A partial wrap on a Honda Ballade can cover just the roof, the hood or the mirror caps with color change film. Ballade chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips. These smaller jobs are a way to change the look or protect the paint without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Ballade: body, cut-outs and film

The Honda Ballade vinyl wrap job changes with body style and overall length. The second generation offered a hatchback measuring 144.7 in (3,675 mm) and a sedan up to 163.8 in (4,160 mm), while the first generation sedan is 161.2 in (4,095 mm) long. A hatchback needs about 43 ft (13 m) of film and a sedan about 46 ft (14 m), so the hatchback wraps with less material. These subcompact panels are short, which makes each piece easier to handle than on a longer car.

Ballade wrap ideas must allow for the tailgate on second generation hatchbacks, where the rear glass is set into the tailgate and the film ends at the edge of the glass. On all Ballade generations the door handles, mirrors and badges are removed for a clean install. Cut-outs are made around the antenna base, washer jets and door locks. The first generation sedan has no tailgate glass to work around, but its chrome trim can be covered with film for a chrome delete.

To work out how much vinyl to wrap a Ballade, compare the factory body dimensions between the two generations. The second generation hatchback spans 144.7 in (3,675 mm) to 163.8 in (4,160 mm) depending on style, and the first generation sedan is 161.2 in (4,095 mm). A full wrap of the first generation sedan needs about 46 ft (14 m) of 60-inch (1.52 m) film, the same as the second generation sedan. The second generation hatchback takes about 43 ft (13 m), so a hatchback wrap uses less film than any sedan.

Questions about wrapping a Honda Ballade

How much vinyl does it take to wrap a Honda Ballade?

A full wrap of a Honda Ballade takes about 46 ft (14 m) of 60-inch (1.52 m) film for the newest sedan body. The second generation hatchback uses about 43 ft (13 m), so the sedan is the higher figure. Chrome or patterned film can need up to about 57 ft (17.5 m) because the pattern must be matched. The estimate includes enough film for the panels and standard cut allowances on a subcompact car.

Which Ballade body takes more film?

The sedan takes more film than the hatchback in the Honda Ballade range. A full wrap of a second generation hatchback needs about 43 ft (13 m), while the sedan needs about 46 ft (14 m) of 60-inch (1.52 m) film. The first generation sedan also uses about 46 ft (14 m), because its body is close in size to the later sedan. The difference comes from the larger panels and the extra doors on the sedan.

Can I wrap only the hood or the roof of a Ballade?

Yes, you can wrap only the hood or the roof of a Ballade as a partial wrap. The roof or hood is wrapped with the same cast film as a full wrap, using less material and labor. Mirror caps and chrome window trim or badges can also be wrapped on their own. Clear paint protection film (PPF) on the front end is another partial option that leaves the rest of the car untouched.

Is a Ballade hard to wrap?

A Honda Ballade is not a hard car to wrap, but the tailgate on the second generation hatchback adds work because the film must end at the edge of the rear glass. The panels are short, which makes them easier to handle than those on a longer car. The first generation sedan has no tailgate glass, so its rear panel is straightforward. The 1980s paint may be old or repainted, so a test spot is needed on each panel before wrapping.