Wraps by car

Honda Capa wrap

The Honda Capa wrap is a color change wrap job for the subcompact van built by Honda from 1998 to 2002. This model has one generation in the catalog, with a five-door van body. A full wrap of the Capa takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap film.

1generations16.5 mof film for a full wrap

Honda Capa, first generation, factory photo
Honda Capa, first generation. Factory color shown.

Honda Capa wrap colors and ideas

  • Capa black wrap
  • Capa white wrap
  • Capa gray wrap
  • Capa silver wrap
  • Capa red wrap
  • Capa blue wrap
  • Capa green wrap
  • Capa yellow wrap
  • Capa orange wrap
  • Capa purple wrap
  • Capa pink wrap
  • Capa teal wrap
  • Capa brown wrap
  • Capa gold wrap
  • Capa chrome wrap
  • Capa color shift wrap
  • Capa carbon fiber wrap
  • Capa camo and patterned wrap

How much vinyl to wrap a Honda Capa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2002van (5 doors)148.6 in (3,775 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Capa wrap cost factors

Capa wrap cost depends on the size of the van and the number of cut-outs, such as the sliding door tracks and the badges. A full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 66 ft (20 m). The cost also changes with the film brand and the complexity of the install.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Capa wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Capa, first generation, factory photo
Factory color shown

1998–2002 Capa van (first generation)

1998–2002van (5 doors)148.6 in (3,775 mm)

The first generation Honda Capa was produced from 1998 to 2002 as a five-door van. Its sliding side doors have tracks that stay bare, so the wrap film is cut along those tracks. This body style uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Capa

A partial wrap on a Honda Capa can cover the roof, the hood, or the mirror caps. Capa chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film applied to the front end of the Capa.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Capa: body, cut-outs and film

A Honda Capa vinyl wrap covers a small van body that is 148.6 in (3,775 mm) long. The five-door shape has large flat side panels, but the sliding side doors add cut lines where the film meets the tracks. A small van like this uses less film than a larger van or SUV.

Capa wrap ideas start with the sliding side doors, because the door tracks stay bare and decide where the film is cut. The door handles, badges, and the tailgate trim need cut-outs or removal for a clean install. The bumper covers and the mirrors are wrapped in separate pieces.

When counting how much vinyl to wrap a Capa, remember that this car was sold only as the 1998–2002 first generation. The body dimensions and the sliding door layout are the same for every Capa built in those years. A wrap shop can use the same film estimate for any Capa from this generation.

Questions about wrapping a Honda Capa

How much vinyl does it take to wrap a Honda Capa?

A full wrap of a Honda Capa takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap film. If the film is chrome or patterned, the estimate is about 66 ft (20 m). The exact amount depends on the wrap design and how many pieces are used.

Are the sliding doors of a Capa wrapped?

No, the sliding doors of a Capa are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide. The tracks themselves are left uncovered to allow the door mechanism to move.

Can I wrap only the hood or the roof of a Capa?

Yes, you can wrap only the hood or the roof of a Capa. A partial wrap on this car can also cover the mirror caps. Chrome delete on the window trim and badges is another smaller option.

Is a Capa hard to wrap?

A Capa is not a very hard car to wrap, but the sliding side doors add work. The door tracks must stay bare, so the film has to be cut carefully along those lines. The small van body is 148.6 in (3,775 mm) long, so a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.