Wraps by car

Honda Concerto wrap

The Honda Concerto wrap page covers the first-generation Concerto from 1988 to 1994. A full vinyl wrap of this compact car takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Honda Concerto, first generation, factory photo
Honda Concerto, first generation. Factory color shown.

Honda Concerto wrap colors and ideas

  • Concerto black wrap
  • Concerto white wrap
  • Concerto gray wrap
  • Concerto silver wrap
  • Concerto red wrap
  • Concerto blue wrap
  • Concerto green wrap
  • Concerto yellow wrap
  • Concerto orange wrap
  • Concerto purple wrap
  • Concerto pink wrap
  • Concerto teal wrap
  • Concerto brown wrap
  • Concerto gold wrap
  • Concerto chrome wrap
  • Concerto color shift wrap
  • Concerto carbon fiber wrap
  • Concerto camo and patterned wrap

How much vinyl to wrap a Honda Concerto

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1994hatchback, sedan (4 or 5 doors)167.9 in (4,265 mm) to 173.8 in (4,415 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Concerto wrap cost factors

Concerto wrap cost depends on the film type, the body style, and the labor for the many cut edges. A chrome or patterned film uses about 61 ft (18.5 m), while a solid cast film takes about 49 ft (15 m) of 60-inch (1.52 m) material. The sedan has slightly more area than the hatchback, which raises the film quantity. The tailgate glass requires precise trimming, which adds labor time.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Concerto wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Concerto, first generation, factory photo
Factory color shown

1988–1994 Concerto hatchback, sedan (first generation)

1988–1994hatchback, sedan (4 or 5 doors)167.9 in (4,265 mm) to 173.8 in (4,415 mm)

The first generation Honda Concerto was built from 1988 to 1994 as a hatchback or a sedan. The style decides the panel plan and the film amount for a wrap. The sedan is 173.8 in (4,415 mm) long and the hatchback 167.9 in (4,265 mm), so the sedan uses a little more vinyl. Both bodies take about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Concerto

A partial wrap suits the Honda Concerto when you want to change only certain areas. You can wrap the roof, hood, or mirror caps without covering the whole car. Concerto chrome delete covers window trim and badges with black film for a different look. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Concerto: body, cut-outs and film

The Honda Concerto vinyl wrap choices depend on the hatchback or sedan body style. The hatchback measures 167.9 in (4,265 mm) and the sedan 173.8 in (4,415 mm), so the sedan needs a little more material. Door count affects panel shapes but changes film use only slightly. A wrap shop measures each panel before cutting film.

Concerto wrap ideas often begin with the tailgate, which has the rear glass set into it. On this area the film ends at the edge of the glass, so the installer trims carefully around it. Removing door handles and mirrors gives cleaner edges. Badges come off for a smooth finish and go back on after wrapping.

How much vinyl to wrap a Concerto stays the same across its catalog years because there is one generation. The body styles share most dimensions, so the panel plan changes little. The sedan's extra 5.9 inches (150 mm) of length adds film on the roof and lower body. The film estimate covers a full exterior wrap for either style.

Questions about wrapping a Honda Concerto

How much vinyl does it take to wrap a Honda Concerto?

Yes, a full wrap of a Honda Concerto takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the figure is about 61 ft (18.5 m). The exact amount can vary with the body style and how the installer cuts the panels.

Which Concerto body takes more film?

Between the two Concerto body styles, the sedan takes more film than the hatchback. The sedan is 173.8 in (4,415 mm) long, while the hatchback is 167.9 in (4,265 mm). That extra length adds material on the roof and lower body panels.

Can I wrap only the hood or the roof of a Concerto?

Yes, you can wrap only the hood or the roof of a Concerto as a partial wrap. The hood is a single panel that is easy to cover on its own. The roof wrap can end at the windshield and rear glass edges. You can also do mirror caps or a clear paint protection film on the front end.

Is a Concerto hard to wrap?

A Honda Concerto is not the hardest car to wrap, but the tailgate with the rear glass takes extra work. The film must end at the edge of the glass, so installers spend more time cutting and tucking. At 167.9 in (4,265 mm) to 173.8 in (4,415 mm) long, the compact body has manageable panel sizes. Door handles and badges come off for a cleaner result, which adds a few steps.