Wraps by car

Honda CR-X wrap

The Honda CR-X wrap page covers the first three generations of this mini coupe and convertible. A full vinyl wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The oldest two generations need about 41 ft (12.5 m) of the same film. This guide explains what each body style means for a wrap.

3generations11.5 mof film for a full wrap

Honda CR-X, third generation, factory photo
Honda CR-X, third generation. Factory color shown.

Honda CR-X wrap colors and ideas

  • CR-X black wrap
  • CR-X white wrap
  • CR-X gray wrap
  • CR-X silver wrap
  • CR-X red wrap
  • CR-X blue wrap
  • CR-X green wrap
  • CR-X yellow wrap
  • CR-X orange wrap
  • CR-X purple wrap
  • CR-X pink wrap
  • CR-X teal wrap
  • CR-X brown wrap
  • CR-X gold wrap
  • CR-X chrome wrap
  • CR-X color shift wrap
  • CR-X carbon fiber wrap
  • CR-X camo and patterned wrap

How much vinyl to wrap a Honda CR-X

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1998convertible (2 doors)157.7 in (4,005 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1987–1992coupe (2 doors)149.6 in (3,800 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)
1983–1987coupe (2 doors)150.0 in (3,810 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

CR-X wrap cost factors

CR-X wrap cost depends on the film type, the number of panels, and the condition of the paint. The mini body keeps the area small, but a chrome or patterned film can require about 46 to 52 ft (14 to 16 m). The convertible top area is not wrapped, which slightly reduces the work. Repainted or aged panels may need more preparation before the film goes on.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

CR-X wraps by generation

Swipe sideways. Tap a card for the full description.

Honda CR-X, third generation, factory photo
Factory color shown

1992–1998 CR-X convertible (third generation)

1992–1998convertible (2 doors)157.7 in (4,005 mm)

The third generation Honda CR-X wraps the open top separately from the body. A fabric convertible top is not wrapped, and the film ends where the top begins. If the car has a folding hard top, it is wrapped as panels of its own. This keeps the wrap lines clean around the roof opening.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Honda CR-X, second generation, factory photo
Factory color shown

1987–1992 CR-X coupe (second generation)

1987–1992coupe (2 doors)149.6 in (3,800 mm)

The second generation Honda CR-X from 1987–1992 may have original or repainted panels. A test spot is needed before a full wrap to check how the film adheres to the older paint. Paint condition varies on cars of these years, so each panel is checked. Proper preparation prevents lifting on aged surfaces.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Honda CR-X, first generation, factory photo
Factory color shown

1983–1987 CR-X coupe (first generation)

1983–1987coupe (2 doors)150.0 in (3,810 mm)

The first generation Honda CR-X is a mini coupe at 150.0 in (3,810 mm) long. The two-door body has two long side doors, and each door is one large piece of film. The small size keeps the total film close to 41 ft (12.5 m) for a standard color change. The panel count is low, which makes the job straightforward.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a CR-X

Partial wraps and CR-X chrome delete are good options for this car. A partial wrap can cover the hood, mirror caps, and rear deck. Chrome delete includes the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end only.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda CR-X: body, cut-outs and film

The Honda CR-X vinyl wrap works with very compact bodies between 149.6 in (3,800 mm) and 157.7 in (4,005 mm) long. Two-door coupes and a two-door convertible are the only body styles, so every wrap uses large side panels. The short roof and small rear section keep film use lower than on many larger cars. The convertible top is never wrapped, which removes a whole area from the job.

CR-X wrap ideas include two long side doors that are each covered with one large piece of film. On the convertible, the fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as separate panels. Door handles, mirrors, and badges are removed or cut around for a clean finish.

How much vinyl to wrap a CR-X depends on the generation you own. The first generation from 1983–1987 needs about 41 ft (12.5 m) of cast film. The second generation from 1987–1992 needs the same amount of standard film. The third generation from 1992–1998 with a convertible body needs about 38 ft (11.5 m).

Questions about wrapping a Honda CR-X

How much vinyl does it take to wrap a Honda CR-X?

A Honda CR-X needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. The first and second generations need about 41 ft (12.5 m) of the same film. These figures are for a standard color change wrap. Chrome or patterned film adds extra material.

Is the top of a CR-X wrapped?

No, a fabric convertible top is not wrapped on a CR-X. The vinyl film ends where the fabric top begins. Only the hard body panels are covered. A folding hard top is wrapped as its own panels.

Can I wrap only the hood or the roof of a CR-X?

Yes, a partial wrap on a CR-X can cover only the hood, mirror caps, and rear deck. The roof is not a standard partial wrap area for this car. You can also do chrome delete on the window trim and badges. These smaller jobs use less film than a full wrap.

Is a CR-X hard to wrap?

A CR-X adds some work because of its two long side doors and the convertible top on the third generation. Each long door needs one large piece of film, which takes care to apply without wrinkles. The mini size keeps the total area small. The convertible top area is not wrapped, but the edges need clean finishing.