Wraps by car

Honda CR-Z wrap

This guide covers the Honda CR-Z wrap for the first generation built from 2010 to 2017. The catalog includes one generation in three-door hatchback form. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body needs about 59 ft (18 m).

1generations14.5 mof film for a full wrap

Honda CR-Z, first generation, factory photo
Honda CR-Z, first generation. Factory color shown.

Honda CR-Z wrap colors and ideas

  • CR-Z black wrap
  • CR-Z white wrap
  • CR-Z gray wrap
  • CR-Z silver wrap
  • CR-Z red wrap
  • CR-Z blue wrap
  • CR-Z green wrap
  • CR-Z yellow wrap
  • CR-Z orange wrap
  • CR-Z purple wrap
  • CR-Z pink wrap
  • CR-Z teal wrap
  • CR-Z brown wrap
  • CR-Z gold wrap
  • CR-Z chrome wrap
  • CR-Z color shift wrap
  • CR-Z carbon fiber wrap
  • CR-Z camo and patterned wrap

How much vinyl to wrap a Honda CR-Z

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2017hatchback (3 doors)160.6 in (4,080 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

CR-Z wrap cost factors

CR-Z wrap cost depends on film choice, labor and the condition of the car. The car is a compact three-door hatchback with a length of 160.6 in (4,080 mm). The front bumper needs cut-outs for fog lamps on every trim. Paint age matters on a car from 2010 to 2017, because panels may be original or repainted.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

CR-Z wraps by generation

Swipe sideways. Tap a card for the full description.

Honda CR-Z, first generation, factory photo
Factory color shown

2010–2017 CR-Z hatchback (first generation)

2010–2017hatchback (3 doors)160.6 in (4,080 mm)

The first generation Honda CR-Z ran from 2010 to 2017 as a three-door hatchback. On a car of these years, panels may be original or repainted depending on paint age. A test spot comes before a full wrap to check film adhesion on each panel. This step helps avoid lifting on older paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a CR-Z

A partial wrap on the Honda CR-Z covers the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs are smaller than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda CR-Z: body, cut-outs and film

The Honda CR-Z vinyl wrap is shaped by its one body style and compact size. The car is a three-door hatchback with a length of 160.6 in (4,080 mm). Two long side doors each become one large piece of film. The tailgate includes the rear glass, so the film ends at the glass edge.

CR-Z wrap ideas start with the parts that need cut-outs or come off. Every trim has fog lamps in the front bumper, so the bumper film gets cut-outs for them. The two long side doors are each wrapped as one large piece. The tailgate film stops at the edge of the glass.

How much vinyl to wrap a CR-Z changes between generations is not a concern here because the catalog lists one generation only. This single generation spans 2010 to 2017 with no body changes. The film estimate stays the same for every year in that range. A full wrap uses about 48 ft (14.5 m) of 60-inch cast film.

Questions about wrapping a Honda CR-Z

How much vinyl does it take to wrap a Honda CR-Z?

Yes, a full wrap of a Honda CR-Z takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, allow about 59 ft (18 m). The CR-Z is a compact hatchback, so the total is less than a larger car.

Can I wrap only the hood or the roof of a CR-Z?

Yes, you can wrap only the hood or the roof of a CR-Z. A partial wrap also includes mirror caps as an option. This is a smaller job than a full wrap.

Is a CR-Z hard to wrap?

Yes, a CR-Z has a few parts that add work. The front bumper has fog lamps on every trim, so cut-outs are needed. The two long side doors are each one large piece of film. The tailgate film ends at the edge of the glass. The compact size helps, but these details take time.

How many generations of the CR-Z does this page cover?

This page covers one generation of the Honda CR-Z, the first generation built from 2010 to 2017.