Wraps by car

Honda Element wrap

The Honda Element wrap guide covers the boxy first-generation SUV built from 2002 to 2010. A full vinyl wrap of the newest Element body uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. This page explains what the shape, the tailgate and the restyling years mean for a wrap.

1generations18 mof film for a full wrap

Honda Element, first generation, factory photo
Honda Element, first generation. Factory color shown.

Honda Element wrap colors and ideas

  • Element black wrap
  • Element white wrap
  • Element gray wrap
  • Element silver wrap
  • Element red wrap
  • Element blue wrap
  • Element green wrap
  • Element yellow wrap
  • Element orange wrap
  • Element purple wrap
  • Element pink wrap
  • Element teal wrap
  • Element brown wrap
  • Element gold wrap
  • Element chrome wrap
  • Element color shift wrap
  • Element carbon fiber wrap
  • Element camo and patterned wrap

How much vinyl to wrap a Honda Element

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2010SUV (5 doors)166.5 in (4,229 mm) to 169.9 in (4,315 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Element wrap cost factors

Element wrap cost depends on the size of the SUV and the amount of film, about 59 ft (18 m) for a full wrap. The tall roof and the tailgate glass add steps, so labor changes with the chosen finish and the condition of the panels. Chrome or patterned film raises the film amount to about 74 ft (22.5 m).

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (71.5 in (1,816 mm)): the roof is wrapped from a platform.
  • Restyled in 2006, 2008: bumpers and lights differ between the versions, and so do the film cuts.

Element wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Element, first generation, factory photo
Factory color shown

2002–2010 Element SUV (first generation)

2002–2010SUV (5 doors)166.5 in (4,229 mm) to 169.9 in (4,315 mm)

The first generation Honda Element moved through two restylings, in 2006 and 2008, that changed the bumpers and lights. Film cut for one version does not fit the other because the nose and tail shapes differ. A template for an early 2002–2005 body will not match the panels of a later 2009–2010 Element.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (71.5 in (1,816 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Element

A partial wrap on an Element can cover the roof, hood or mirror caps for a color change on one section. An Element chrome delete applies black film to the window trim and badges to cover the bright parts. Paint protection film (PPF) in clear is placed on the front end to shield the leading surfaces from road wear.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Honda Element: body, cut-outs and film

A Honda Element vinyl wrap is sized around a compact SUV with five doors and a tall, upright profile. The body runs from 166.5 in (4,229 mm) to 169.9 in (4,315 mm) long, so film is cut to fit the squared panels. The flat roof and slab sides make material estimation simpler than on curved bodies.

Element wrap ideas should account for a tailgate with the rear glass in it, where the film ends at the edge of the glass. The tall body, 71.5 in (1,816 mm) high, means the roof is wrapped from a platform for safe reach. Emblems and door handles are removed or cut around to keep edges clean.

To know how much vinyl to wrap an Element, check the version you have because the restyling in 2006 and 2008 altered bumpers and lights. Earlier and later front ends use different film cuts, so the same pattern does not cover every production year. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Honda Element

How much vinyl does it take to wrap a Honda Element?

A full Honda Element wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film in a plain color. For chrome or patterned film, plan for about 74 ft (22.5 m). The estimate covers the newest body of the first generation, from 2008 to 2010.

Which years of the Element take the same film cuts?

The Element run splits into three film-cut groups: 2002–2005, 2006–2008, and 2009–2010. The 2006 and 2008 restylings changed the bumpers and lights, so film cut for one group does not fit another. Within each group, the same cuts work across the years.

Can I wrap only the hood or the roof of an Element?

Yes, you can wrap only the hood or the roof of an Element as a partial wrap. A roof wrap on the tall body, 71.5 in (1,816 mm) high, is done from a platform. A hood wrap or mirror cap wrap is a smaller color change that leaves the rest of the body untouched.

Is an Element hard to wrap?

An Element is not hard to wrap, but the tailgate with the rear glass in it and the tall roof add work. The glass edge means the film ends at the glass and needs a clean trim line. The roof, at 71.5 in (1,816 mm) high, is wrapped from a platform, so it takes a bit more setup than a low sedan roof.