Wraps by car

Honda Elysion wrap

The Honda Elysion wrap page covers the first and only generation, a 5-door van built from 2004 to 2013. A full wrap of this body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film adds roughly 8 ft (2.5 m), bringing the total to about 82 ft (25 m).

1generations22.5 mof film for a full wrap

Honda Elysion, first generation, factory photo
Honda Elysion, first generation. Factory color shown.

Honda Elysion wrap colors and ideas

  • Elysion black wrap
  • Elysion white wrap
  • Elysion gray wrap
  • Elysion silver wrap
  • Elysion red wrap
  • Elysion blue wrap
  • Elysion green wrap
  • Elysion yellow wrap
  • Elysion orange wrap
  • Elysion purple wrap
  • Elysion pink wrap
  • Elysion teal wrap
  • Elysion brown wrap
  • Elysion gold wrap
  • Elysion chrome wrap
  • Elysion color shift wrap
  • Elysion carbon fiber wrap
  • Elysion camo and patterned wrap

How much vinyl to wrap a Honda Elysion

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2013van (5 doors)190.6 in (4,840 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Elysion wrap cost factors

Elysion wrap cost depends on the film area and the number of cut-outs, not on a fixed price list. This van needs about 74 ft (22.5 m) of 60-inch (1.52 m) film for a full color change, and more for patterned or chrome vinyl. The sliding door tracks and the tall 71.3 in (1,810 mm) roof add labor time. A partial wrap or chrome delete uses less material and fewer hours.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.
  • Restyled in 2006: bumpers and lights differ between the versions, and so do the film cuts.

Elysion wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Elysion, first generation, factory photo
Factory color shown

2004–2013 Elysion van (first generation)

2004–2013van (5 doors)190.6 in (4,840 mm)

The first generation Honda Elysion runs from 2004 to 2013 and was restyled in 2006. The sliding side doors define the wrap: their tracks stay bare and decide where the film is cut. The roof is one tall piece on a 71.3 in (1,810 mm) body, wrapped from a platform. Every year of this generation shares the same film cuts.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on an Elysion

A partial wrap on the Elysion suits the roof, hood, or mirror caps when a full color change is not needed. An Elysion chrome delete covers the bright window trim and badges with black film. Clear paint protection film (PPF) on the front end guards the bumper, hood, and mirror caps from stone chips. These jobs need less film than a full wrap but still follow the door tracks on the sides.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Elysion: body, cut-outs and film

The Honda Elysion is a long minivan at 190.6 in (4,840 mm), so a Honda Elysion vinyl wrap uses more film than a small hatchback. Its tall body of 71.3 in (1,810 mm) means the roof cannot be reached from the floor. Installers wrap the roof from a low platform and work the sides in one tall piece each. The single body style keeps every job on the same panel set.

The sliding side doors shape most Elysion wrap ideas because their tracks stay bare and the film is cut along them. The door handles, mirror caps, and badges come off for a clean edge. The front bumper has air intakes that need relief cuts, and the rear lamps are masked. The tall roof is wrapped from a platform as one large piece.

Anyone asking how much vinyl to wrap an Elysion should count the 2004–2013 model only. The body was restyled in 2006, but the panels and glass are unchanged. Film cuts from a 2004 van fit a 2013 van exactly. The estimate of about 74 ft (22.5 m) of 60-inch (1.52 m) film covers every year of this generation.

Questions about wrapping a Honda Elysion

How much vinyl does it take to wrap a Honda Elysion?

A Honda Elysion takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That figure covers the first generation body from 2004 to 2013. Chrome or patterned film raises the total to about 82 ft (25 m) because of overlap on the tall panels.

Are the sliding doors of an Elysion wrapped?

Yes, the sliding doors of an Elysion are wrapped, but their tracks stay bare. The film is cut along the top and bottom of each track, and the door panel is wrapped in one piece above and below. The wrap does not enter the track, so the door still slides freely.

Which years of the Elysion take the same film cuts?

All Elysion years from 2004 to 2013 take the same film cuts. The 2006 restyling changed the look but not the panel shapes or dimensions. Templates from any year work across the entire generation.

Can I wrap only the hood or the roof of an Elysion?

Yes, you can wrap only the hood or the roof of an Elysion as a partial wrap. The roof is a single large piece on the tall body, and the hood is wrapped with the edges tucked under. Mirror caps are often done with the hood, and a chrome delete covers the window trim and badges separately.