Wraps by car

Honda Fit Aria wrap

This page covers the Honda Fit Aria wrap, a vinyl wrap for the subcompact sedan built as a single generation. The first generation ran from 2002 to 2009 and offered one body style: a four-door sedan. A full wrap of this body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Honda Fit Aria, first generation, factory photo
Honda Fit Aria, first generation. Factory color shown.

Honda Fit Aria wrap colors and ideas

  • Fit Aria black wrap
  • Fit Aria white wrap
  • Fit Aria gray wrap
  • Fit Aria silver wrap
  • Fit Aria red wrap
  • Fit Aria blue wrap
  • Fit Aria green wrap
  • Fit Aria yellow wrap
  • Fit Aria orange wrap
  • Fit Aria purple wrap
  • Fit Aria pink wrap
  • Fit Aria teal wrap
  • Fit Aria brown wrap
  • Fit Aria gold wrap
  • Fit Aria chrome wrap
  • Fit Aria color shift wrap
  • Fit Aria carbon fiber wrap
  • Fit Aria camo and patterned wrap

How much vinyl to wrap a Honda Fit Aria

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2009sedan (4 doors)169.7 in (4,310 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Fit Aria wrap cost factors

Fit Aria wrap cost depends on the film type, the condition of the paint, and the door count of this four-door sedan. The 169.7 in (4,310 mm) length is fixed for all years, so labor is predictable. A car from 2002 to 2009 may need paint correction before the wrap, which adds work. Partial wraps reduce the cost compared to a full 52 ft (16 m) wrap.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Fit Aria wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Fit Aria, first generation, factory photo
Factory color shown

2002–2009 Fit Aria sedan (first generation)

2002–2009sedan (4 doors)169.7 in (4,310 mm)

The first generation Honda Fit Aria was produced from 2002 to 2009 as a four-door sedan. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The paint age affects adhesion, and a test spot shows whether the film will lift or leave residue. The subcompact body is 169.7 in (4,310 mm) long and needs about 52 ft (16 m) of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Fit Aria

A partial wrap on the Honda Fit Aria often covers the roof, hood, or mirror caps for a smaller job. A chrome delete (bright trim covered with black film) on the window trim and badges is another option. Paint protection film (PPF) as a clear film on the front end protects against stone chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Fit Aria: body, cut-outs and film

A Honda Fit Aria vinyl wrap on this four-door sedan suits its 169.7 in (4,310 mm) length well. The subcompact body has modest panel sizes, so film is easier to handle than on longer sedans. The four doors add seams and edge work, but the simple sedan shape keeps the wrap straightforward.

Fit Aria wrap ideas should account for the door handles, mirrors, and badges that come off for a clean install. The window trim and grille need careful cut-outs, and the front bumper has fog light openings on some trims. Removing the door handles helps the film sit flat around the lock cylinders.

For how much vinyl to wrap a Fit Aria, the single generation keeps the math simple. The sedan body from 2002 to 2009 stays the same size, so the film estimate does not change between years. You only need to adjust for film type: chrome or patterned film adds about 10 ft (3 m).

Questions about wrapping a Honda Fit Aria

How much vinyl does it take to wrap a Honda Fit Aria?

About 52 ft (16 m) of 60-inch (1.52 m) cast film wraps a Honda Fit Aria sedan. If you use chrome or patterned film, the estimate rises to about 62 ft (19 m). These figures are for a full wrap of the first generation body, which was the only one offered.

Can I wrap only the hood or the roof of a Fit Aria?

Yes, you can wrap only the hood or the roof of a Fit Aria. The partial wrap options include the roof, hood, and mirror caps as smaller jobs. A hood wrap uses far less film than a full wrap and is a good way to change the look without committing to the whole car.

Is a Fit Aria hard to wrap?

A Fit Aria is not especially hard to wrap because it is a subcompact sedan with straightforward panels. The four doors and the cut-outs for handles, mirrors, and badges add some work. The 169.7 in (4,310 mm) length is manageable, and the simple shape has few deep recesses.

How many generations of the Fit Aria does this page cover?

This page covers one generation of the Honda Fit Aria. The first generation was produced from 2002 to 2009 and came only as a four-door sedan. The film estimate is for that single body style.