Wraps by car

Honda Fit Shuttle wrap

The Honda Fit Shuttle wrap guide covers the single production generation of this subcompact wagon built from 2011 to 2015. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 67 ft (20.5 m).

1generations18.5 mof film for a full wrap

Honda Fit Shuttle, first generation, factory photo
Honda Fit Shuttle, first generation. Factory color shown.

Honda Fit Shuttle wrap colors and ideas

  • Fit Shuttle black wrap
  • Fit Shuttle white wrap
  • Fit Shuttle gray wrap
  • Fit Shuttle silver wrap
  • Fit Shuttle red wrap
  • Fit Shuttle blue wrap
  • Fit Shuttle green wrap
  • Fit Shuttle yellow wrap
  • Fit Shuttle orange wrap
  • Fit Shuttle purple wrap
  • Fit Shuttle pink wrap
  • Fit Shuttle teal wrap
  • Fit Shuttle brown wrap
  • Fit Shuttle gold wrap
  • Fit Shuttle chrome wrap
  • Fit Shuttle color shift wrap
  • Fit Shuttle carbon fiber wrap
  • Fit Shuttle camo and patterned wrap

How much vinyl to wrap a Honda Fit Shuttle

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2015wagon (5 doors)172.6 in (4,385 mm) to 173.6 in (4,410 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Fit Shuttle wrap cost factors

Fit Shuttle wrap cost depends on the size of the vehicle, the film chosen, and the amount of disassembly needed. This wagon is about 172.6 in (4,385 mm) to 173.6 in (4,410 mm) long, so a full color change wrap takes about 61 ft (18.5 m) of cast film. The tailgate design adds no extra cost but requires care around the rear glass.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2013: bumpers and lights differ between the versions, and so do the film cuts.

Fit Shuttle wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Fit Shuttle, first generation, factory photo
Factory color shown

2011–2015 Fit Shuttle wagon (first generation)

2011–2015wagon (5 doors)172.6 in (4,385 mm) to 173.6 in (4,410 mm)

The first generation Honda Fit Shuttle was produced from 2011 to 2015 and restyled in 2013. Bumpers and lights changed with that update, so film cut for one version does not fit the other. Check the production date before cutting or ordering pre-cut pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Fit Shuttle

A partial wrap on a Honda Fit Shuttle can cover the roof, hood, and mirror caps without wrapping the full body. Fit Shuttle chrome delete targets the window trim and badges by covering bright trim with black film. Paint protection film (PPF) is clear film applied to the front end for impact protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Fit Shuttle: body, cut-outs and film

The Honda Fit Shuttle vinyl wrap involves a five-door wagon body that ranges from 172.6 in (4,385 mm) to 173.6 in (4,410 mm) long. This subcompact size keeps material use moderate compared with larger wagons. The tall hatch area and long roof add surface area that a small sedan would not have.

Fit Shuttle wrap ideas begin with the tailgate, which has the rear glass in it, so the film ends at the edge of the glass. The large tailgate panel is a natural canvas for a design. Door handles and mirrors can be wrapped or left as accents.

How much vinyl to wrap a Fit Shuttle depends on the production date: the restyling for 2013 changed bumpers and lights. Film cut for one version does not fit the other. Precise measurement of the bumpers and lights is required before ordering a kit.

Questions about wrapping a Honda Fit Shuttle

How much vinyl does it take to wrap a Honda Fit Shuttle?

A full wrap of a Honda Fit Shuttle takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 67 ft (20.5 m).

Which years of the Fit Shuttle take the same film cuts?

The Honda Fit Shuttle was built from 2011 to 2015, with a restyling in 2013. Film cuts for the pre-2013 version do not fit the updated bumpers and lights. The 2013–2015 cars share the same cuts.

Can I wrap only the hood or the roof of a Fit Shuttle?

Yes, you can wrap only the hood or the roof of a Fit Shuttle. A partial wrap can also include mirror caps or a chrome delete on the window trim and badges. Paint protection film is another option for the front end.

Is a Fit Shuttle hard to wrap?

A Honda Fit Shuttle is not hard to wrap for a shop with a clean bay and the right tools. The main challenge is the tailgate with the rear glass in it, where the film must end at the edge of the glass. Its length of about 172.6 in (4,385 mm) to 173.6 in (4,410 mm) is manageable.