Wraps by car

Honda FR-V wrap

The Honda FR-V wrap page covers the 2005–2009 minivan in its single generation. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you want chrome or patterned film, plan on about 72 ft (22 m).

1generations19.5 mof film for a full wrap

Honda FR-V, first generation, factory photo
Honda FR-V, first generation. Factory color shown.

Honda FR-V wrap colors and ideas

  • FR-V black wrap
  • FR-V white wrap
  • FR-V gray wrap
  • FR-V silver wrap
  • FR-V red wrap
  • FR-V blue wrap
  • FR-V green wrap
  • FR-V yellow wrap
  • FR-V orange wrap
  • FR-V purple wrap
  • FR-V pink wrap
  • FR-V teal wrap
  • FR-V brown wrap
  • FR-V gold wrap
  • FR-V chrome wrap
  • FR-V color shift wrap
  • FR-V carbon fiber wrap
  • FR-V camo and patterned wrap

How much vinyl to wrap a Honda FR-V

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2009van (5 doors)168.7 in (4,285 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

FR-V wrap cost factors

FR-V wrap cost depends on how much film is used, and this van needs about 64 ft (19.5 m) of 60-inch (1.52 m) material. A chrome or patterned film raises the amount to about 72 ft (22 m), which adds to the material cost. The sliding door tracks and the five-door body also add labor time.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

FR-V wraps by generation

Swipe sideways. Tap a card for the full description.

Honda FR-V, first generation, factory photo
Factory color shown

2005–2009 FR-V van (first generation)

2005–2009van (5 doors)168.7 in (4,285 mm)

The first generation Honda FR-V was produced from 2005 to 2009 as a five-door van. Its sliding side doors decide where the film is cut, because the tracks stay bare. The body code for this generation is BE.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an FR-V

A partial wrap on an FR-V can cover the roof, the hood or the mirror caps. A chrome delete covers the window trim and badges with black film. For protection, clear paint protection film (PPF) can be applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda FR-V: body, cut-outs and film

A Honda FR-V vinyl wrap has to fit a five-door van body that is 168.7 in (4,285 mm) long. The roof is tall and the sides are broad, so a full color change wrap uses more film than a small hatchback. The five doors add panel edges and shut lines that the installer works around.

FR-V wrap ideas should start with the sliding side doors, because their tracks stay bare and the film is cut along them. The door handles, mirrors and badges come off for a cleaner edge, or the film can be trimmed around them. The roof rails, if fitted, are usually left uncovered.

If you want to know how much vinyl to wrap an FR-V, the answer stays the same across the 2005–2009 run. The body shape did not change, so the film estimate of about 64 ft (19.5 m) applies to every year. Only a different finish, like chrome or a pattern, raises the figure to about 72 ft (22 m).

Questions about wrapping a Honda FR-V

How much vinyl does it take to wrap a Honda FR-V?

A Honda FR-V takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, plan on about 72 ft (22 m).

Are the sliding doors of an FR-V wrapped?

Yes, the sliding doors of an FR-V are wrapped, but their tracks stay bare. The film is cut along the tracks so the doors can still slide.

Can I wrap only the hood or the roof of an FR-V?

Yes, you can wrap only the hood or the roof of an FR-V as a partial wrap. Other common partial jobs are mirror caps, chrome delete on window trim and badges, and clear paint protection film (PPF) on the front end.

Is an FR-V hard to wrap?

An FR-V adds some work because of its size and its sliding side doors. The van is 168.7 in (4,285 mm) long, and the door tracks must stay bare, so the film is cut along them.