Wraps by car

Honda Integra SJ wrap

This page covers the Honda Integra SJ vinyl wrap for the first generation produced from 1996 to 2001. The catalog includes one generation of this compact sedan with four doors. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Honda Integra SJ, first generation, factory photo
Honda Integra SJ, first generation. Factory color shown.

Honda Integra SJ wrap colors and ideas

  • Integra SJ black wrap
  • Integra SJ white wrap
  • Integra SJ gray wrap
  • Integra SJ silver wrap
  • Integra SJ red wrap
  • Integra SJ blue wrap
  • Integra SJ green wrap
  • Integra SJ yellow wrap
  • Integra SJ orange wrap
  • Integra SJ purple wrap
  • Integra SJ pink wrap
  • Integra SJ teal wrap
  • Integra SJ brown wrap
  • Integra SJ gold wrap
  • Integra SJ chrome wrap
  • Integra SJ color shift wrap
  • Integra SJ carbon fiber wrap
  • Integra SJ camo and patterned wrap

How much vinyl to wrap a Honda Integra SJ

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001sedan (4 doors)175.2 in (4,450 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Integra SJ wrap cost factors

Integra SJ wrap cost depends on the size of the car, the film type, and the condition of the paint. The sedan is 175.2 in (4,450 mm) long and needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full color change. A chrome or patterned film raises the amount to about 61 ft (18.5 m) because of waste and seam matching. A car of these years may have original or repainted panels, and a test spot before a full wrap adds a small amount to the total.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Integra SJ wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Integra SJ, first generation, factory photo
Factory color shown

1996–2001 Integra SJ sedan (first generation)

1996–2001sedan (4 doors)175.2 in (4,450 mm)

The first generation Honda Integra SJ was built from 1996 to 2001 as a four-door sedan. It is 175.2 in (4,450 mm) long and needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. Paint age matters on a car of these years, because panels may be original or repainted. A test spot on a hidden area shows whether the film will lift old paint.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Integra SJ

A partial wrap on the Integra SJ covers the roof, hood, or mirror caps without wrapping the whole sedan. A chrome delete on the window trim and badges removes the bright trim with black film and is a small job. Paint protection film (PPF) on the front end is a clear film that guards the hood, bumper, and fenders from stone chips. These smaller jobs cost less in film because they use only a few square feet.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Integra SJ: body, cut-outs and film

A Honda Integra SJ vinyl wrap covers a four-door sedan body that is 175.2 in (4,450 mm) long. That length means a full wrap needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. A chrome or patterned film adds seams and alignment work, so the estimate rises to about 61 ft (18.5 m). These figures assume no waste from panel damage or previous paintwork.

For Integra SJ wrap ideas, think about the sedan shape and what owners can leave film off. The door handles, window trim, and badges come off for cleaner edges and fewer cut-outs. A chrome delete covers the bright trim with black film and is often combined with a roof wrap. On a car of these years, surface rust or dents must be fixed before film goes on.

If you need to know how much vinyl to wrap an Integra SJ, start with the single generation in this catalog. The 1996–2001 sedan uses the same body shell across its production run, so film estimates do not change by year. The only difference for film quantity is between a standard color change and a chrome or patterned film. For a standard wrap, budget about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Honda Integra SJ

How much vinyl does it take to wrap a Honda Integra SJ?

A full wrap of a Honda Integra SJ takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. That number fits the first generation sedan built from 1996 to 2001. If you choose a chrome or patterned film, plan for about 61 ft (18.5 m) because of pattern alignment and waste.

Can I wrap only the hood or the roof of an Integra SJ?

Yes, you can wrap only the hood or the roof of an Integra SJ. A partial wrap commonly covers the roof, hood, or mirror caps. A chrome delete on the window trim and badges is also a small job on this sedan.

Is an Integra SJ hard to wrap?

An Integra SJ is not especially hard to wrap, but its sedan shape has some work points. The four doors and trim around the windows mean more cut-outs than a two-door. The 175.2 in (4,450 mm) length is close to the film width, so the roof and hood use full sheets with less waste. Paint age on a 1996–2001 car adds a test spot before a full wrap.

How many generations of the Integra SJ does this page cover?

This page covers one generation of the Honda Integra SJ, the first generation from 1996 to 2001. The catalog lists a single body style: a four-door sedan. No other generations of the Integra SJ are in this catalog.