Wraps by car

Honda Logo wrap

The Honda Logo wrap page covers the first-generation Honda Logo (1996–2001) in its hatchback body style. This page explains what a full vinyl wrap of this subcompact car involves, from film amounts to cut-outs and partial jobs. The Logo was sold as a 3-door or 5-door hatchback, and a full wrap of the body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same full wrap is estimated at about 57 ft (17.5 m).

1generations15 mof film for a full wrap

Honda Logo, first generation, factory photo
Honda Logo, first generation. Factory color shown.

Honda Logo wrap colors and ideas

  • Logo black wrap
  • Logo white wrap
  • Logo gray wrap
  • Logo silver wrap
  • Logo red wrap
  • Logo blue wrap
  • Logo green wrap
  • Logo yellow wrap
  • Logo orange wrap
  • Logo purple wrap
  • Logo pink wrap
  • Logo teal wrap
  • Logo brown wrap
  • Logo gold wrap
  • Logo chrome wrap
  • Logo color shift wrap
  • Logo carbon fiber wrap
  • Logo camo and patterned wrap

How much vinyl to wrap a Honda Logo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001hatchback (3 or 5 doors)149.0 in (3,785 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Logo wrap cost factors

Logo wrap cost is driven by the size of the car, the film chosen, and the amount of disassembly and finishing work. At 149.0 in (3,785 mm) long, the Logo is a subcompact, so a full wrap uses less material than a larger car but still needs careful work around the tailgate glass and badges. A chrome or patterned film adds about 8 ft (2.5 m) more film than a solid color, which increases material cost. A partial wrap of the roof, hood, or mirror caps costs less than a full wrap because it skips the largest and most complex panels.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Logo wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Logo, first generation, factory photo
Factory color shown

1996–2001 Logo hatchback (first generation)

1996–2001hatchback (3 or 5 doors)149.0 in (3,785 mm)

The first-generation Honda Logo (1996–2001) is from a period when paint technology was less resistant to UV than today's finishes. Panels may be original, repainted, or faded unevenly, and the film bonds best to clean, stable paint. A test spot on a hidden area is a standard step before a full wrap to check that the adhesive releases cleanly later. Careful paint inspection and correction before wrapping helps the film lay flat and reduces the chance of lifting at edges.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Logo

Partial wrap jobs on a Honda Logo include the roof, the hood, or the mirror caps in a contrasting film. A chrome delete covers the window trim and badges with black film for a cleaner look without changing the whole car. Paint protection film (PPF) is an option for the front end, where a clear urethane film guards against stone chips and scuffs. These smaller jobs work well on the Logo because the car's short panels make them quick to cover with offcuts from a full wrap kit.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Logo: body, cut-outs and film

A Honda Logo vinyl wrap starts from the size and shape of a subcompact hatchback. At 149.0 in (3,785 mm) long, the car has less surface area than most sedans, but the roof, hatch and tall sides still require careful panel-by-panel work. The 3-door and 5-door versions share the same body length, so the main difference for a wrap is the number and shape of doors. A full wrap of a Logo needs less film than a larger car, which also makes it a good first full-color change project.

Logo wrap ideas must account for the tailgate, which has the rear glass set into it. The film ends at the edge of the glass, so the installer cuts the wrap around the window and leaves the glass clear. On the 5-door body, the rear door handles sit in the C-pillar area and call for precise trimming. Emblems and badges are removed for a clean wrap and reinstalled after the film is laid down.

How much vinyl to wrap a Logo depends on the film type and the body variant. A standard color change on a 3-door or 5-door Logo takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate rises to about 57 ft (17.5 m) because matching patterns consumes extra material. Since the 3-door and 5-door bodies have the same overall dimensions, the amount of film is the same for both, but extra door skins are not needed on the 3-door.

Questions about wrapping a Honda Logo

How much vinyl does it take to wrap a Honda Logo?

No, a full wrap of a Honda Logo takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl. If the wrap uses chrome or patterned film, the amount goes up to about 57 ft (17.5 m) because the pattern must be matched at seams. The figure covers the whole body of the first-generation Logo (1996–2001) in either 3-door or 5-door form.

Can I wrap only the hood or the roof of a Logo?

Yes, you can wrap only the hood or the roof of a Logo. Partial wrap jobs on this car typically cover the roof, the hood, or the mirror caps, leaving the rest of the body in its original paint. A partial wrap is a good way to change the look without the film and labor of a full color change wrap.

Is a Logo hard to wrap?

Yes, the Logo is moderately hard to wrap because of its tailgate with the rear glass set into it. The film must be trimmed cleanly around the edge of the glass, which takes extra knife work and care not to scratch the paint. The car's short, curved panels and the 5-door's recessed rear handles also add time for a smooth finish.

How many generations of the Logo does this page cover?

This page covers one generation of the Honda Logo: the first generation, sold from 1996 to 2001. The catalog has no other generations of the Logo, so all film amounts and wrap notes on this page refer to that body.