Wraps by car

Honda Mobilio Spike wrap

The Honda Mobilio Spike wrap is a service page for this compact minivan, sold from 2002 to 2008 in one generation. The page covers the vinyl wrap film needed for a full color change wrap. A full wrap of the newest body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Honda Mobilio Spike, first generation, factory photo
Honda Mobilio Spike, first generation. Factory color shown.

Honda Mobilio Spike wrap colors and ideas

  • Mobilio Spike black wrap
  • Mobilio Spike white wrap
  • Mobilio Spike gray wrap
  • Mobilio Spike silver wrap
  • Mobilio Spike red wrap
  • Mobilio Spike blue wrap
  • Mobilio Spike green wrap
  • Mobilio Spike yellow wrap
  • Mobilio Spike orange wrap
  • Mobilio Spike purple wrap
  • Mobilio Spike pink wrap
  • Mobilio Spike teal wrap
  • Mobilio Spike brown wrap
  • Mobilio Spike gold wrap
  • Mobilio Spike chrome wrap
  • Mobilio Spike color shift wrap
  • Mobilio Spike carbon fiber wrap
  • Mobilio Spike camo and patterned wrap

How much vinyl to wrap a Honda Mobilio Spike

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2008van (5 doors)161.8 in (4,110 mm) to 162.4 in (4,125 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Mobilio Spike wrap cost factors

Mobilio Spike wrap cost depends on the size of the van, the film chosen and the amount of chrome or roof detail. The vehicle is 161.8 in (4,110 mm) to 162.4 in (4,125 mm) long, so it uses about 62 ft (19 m) of film for a full wrap. A chrome or patterned film wrap needs about 70 ft (21.5 m) and drives the cost up. The sliding door tracks require extra cutting time, which also affects the labor part of the quote.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2005: bumpers and lights differ between the versions, and so do the film cuts.

Mobilio Spike wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Mobilio Spike, first generation, factory photo
Factory color shown

2002–2008 Mobilio Spike van (first generation)

2002–2008van (5 doors)161.8 in (4,110 mm) to 162.4 in (4,125 mm)

The first generation Honda Mobilio Spike (2002–2008) is the only generation in the catalog. Its sliding side doors are the key feature: the tracks stay bare and decide where the film is cut. The van measures 161.8 in (4,110 mm) to 162.4 in (4,125 mm) long and was restyled in 2005 without changing the body size. A full wrap of this van uses about 62 ft (19 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mobilio Spike

A partial wrap on a Honda Mobilio Spike can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end, including the hood and front fenders. These smaller jobs are good ways to protect the paint or change the look without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Mobilio Spike: body, cut-outs and film

The Honda Mobilio Spike vinyl wrap suits a tall 5-door van body that measures 161.8 in (4,110 mm) to 162.4 in (4,125 mm) long. This compact minivan has large flat side panels and a tall roof, so a technician works with long, straight film sections. The wrap is planned in fewer, larger pieces than on a curved sedan, which keeps the film lines clean. The sliding door tracks are left bare, so the film is cut along them.

Mobilio Spike wrap ideas start with the parts that need cut-outs or come off during installation. Door handles, mirrors, badges, antenna, lights and the rear wiper are removed or cut around for a full wrap. The sliding side door tracks stay bare, and the film is cut along them so the doors can still open. The rear hatch and the front fenders are wrapped as separate panels.

How much vinyl to wrap a Mobilio Spike depends on the production years and the restyling in 2005. The first generation kept the same body shape from 2002 to 2008, with a minor facelift after 2005. The wrap film estimate is the same for all years: about 62 ft (19 m) of 60-inch (1.52 m) cast film. A chrome or patterned film wrap uses about 70 ft (21.5 m) because of the extra waste from matching lines.

Questions about wrapping a Honda Mobilio Spike

How much vinyl does it take to wrap a Honda Mobilio Spike?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Honda Mobilio Spike. This estimate covers the full body of the newest body style. A chrome or patterned film wrap uses more film, about 70 ft (21.5 m), because of the extra waste.

Are the sliding doors of a Mobilio Spike wrapped?

No, the sliding door tracks of a Mobilio Spike are left bare when the van is wrapped. The tracks stay bare because the doors must slide. The film is cut along the tracks so the doors can open and close.

Which years of the Mobilio Spike take the same film cuts?

The Honda Mobilio Spike was produced from 2002 to 2008 and restyled in 2005. All years from 2002 to 2008 take the same film cuts because the body shape did not change. Only the first generation exists in the catalog.

Can I wrap only the hood or the roof of a Mobilio Spike?

Yes, you can wrap only the hood or the roof of a Mobilio Spike, or even just the mirror caps and window trim. These partial jobs are a way to protect the paint or change the look for less film than a full wrap. A paint protection film (PPF) on the front end is another partial option.