Wraps by car

Honda N360 wrap

The Honda N360 wrap page covers the first generation of the Honda N360 made from 1967 to 1972. A vinyl wrap for this mini car takes about 33 ft (10 m) of 60-inch (1.52 m) cast film for a basic color change. With chrome or patterned film the estimate rises to about 38 ft (11.5 m).

1generations10 mof film for a full wrap

Honda N360, first generation, factory photo
Honda N360, first generation. Factory color shown.

Honda N360 wrap colors and ideas

  • Honda N360 black wrap
  • Honda N360 white wrap
  • Honda N360 gray wrap
  • Honda N360 silver wrap
  • Honda N360 red wrap
  • Honda N360 blue wrap
  • Honda N360 green wrap
  • Honda N360 yellow wrap
  • Honda N360 orange wrap
  • Honda N360 purple wrap
  • Honda N360 pink wrap
  • Honda N360 teal wrap
  • Honda N360 brown wrap
  • Honda N360 gold wrap
  • Honda N360 chrome wrap
  • Honda N360 color shift wrap
  • Honda N360 carbon fiber wrap
  • Honda N360 camo and patterned wrap

How much vinyl to wrap a Honda N360

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1972sedan (2 doors)122.0 in (3,100 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m)

Honda N360 wrap cost factors

The Honda N360 wrap cost depends on the film type, the condition of the paint, and how much of the car gets wrapped. A basic color change needs about 33 ft (10 m) of 60-inch (1.52 m) cast film, and a chrome or patterned film brings the amount to about 38 ft (11.5 m). Paint age matters on a car of these years because panels may be original or repainted. A partial job such as the roof or hood uses less film and less labor.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).
  • Body: sedan (2 doors).
  • Two long side doors: each door is one large piece of film.

Honda N360 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda N360, first generation, factory photo
Factory color shown

1967–1972 Honda N360 sedan (first generation)

1967–1972sedan (2 doors)122.0 in (3,100 mm)

The first generation Honda N360 was built from 1967 to 1972 as a two-door sedan with a length of 122.0 in (3,100 mm). On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The film estimate for this body is about 33 ft (10 m) of cast film for a standard color change. With chrome or patterned film the estimate is about 38 ft (11.5 m).

Two long side doors: each door is one large piece of film.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).

Roof, hood, chrome delete and PPF on a Honda N360

A partial wrap on a Honda N360 can cover the roof, the hood, or the mirror caps, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also an option: clear film applied to the front end to guard against stone chips. These smaller jobs need less film than a full wrap and can be done without touching the whole body. The two long doors can stay untouched if you only want the front clip protected.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda N360: body, cut-outs and film

The Honda N360 is a two-door sedan with compact dimensions, so a Honda N360 vinyl wrap uses less film than a full-size car. Its overall length is 122.0 in (3,100 mm), and the short body means most panels are small and easy to handle. The car has two long side doors, each of which can be wrapped as one large piece of film. This reduces the number of seams on the sides and keeps the job straightforward.

Honda N360 wrap ideas often start with the two long side doors because each door is one large piece of film. The door handles and mirrors need cut-outs, and they can stay on the car while the film is trimmed around them. The front and rear windows are surrounded by rubber seals that are simple to work around. Since there is little bright trim on this model, a chrome delete is a smaller job than on newer cars.

For how much vinyl to wrap a Honda N360, the catalog has one generation, so the film estimate stays the same for all years from 1967 to 1972. The body style did not change during this run, and the car was always a two-door sedan. That means an installer counts about 33 ft (10 m) of cast film for a standard wrap on any of these cars. A wrap with chrome or patterned film needs about 38 ft (11.5 m).

Questions about wrapping a Honda N360

How much vinyl does it take to wrap a Honda N360?

It takes about 33 ft (10 m) of 60-inch (1.52 m) cast film to wrap a Honda N360 with a basic color change. If you use chrome or patterned film, the estimate is about 38 ft (11.5 m). These numbers are for the full body of the first generation sedan.

Can I wrap only the hood or the roof of a Honda N360?

Yes, you can wrap only the hood or the roof of a Honda N360. A partial wrap can also cover the mirror caps, or you can choose a chrome delete for the window trim and badges. Paint protection film on the front end is another way to cover part of the car.

Is a Honda N360 hard to wrap?

The Honda N360 is not hard to wrap because its body is small and most panels are simple shapes. The two long side doors are each one large piece of film, which makes installation cleaner with fewer seams. The main extra work comes from the age of the paint: on a car of these years panels may be original or repainted, so a test spot is needed before a full wrap.

How many generations of the Honda N360 does this page cover?

This page covers one generation of the Honda N360, which was made from 1967 to 1972. The car was a two-door sedan throughout that period, so all years share the same body style and film estimate.