Wraps by car

Honda Orthia wrap

The Honda Orthia wrap page covers the first generation wagon sold from 1996 to 2002. A full vinyl wrap on the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m). The car was restyled once, in 1997, and this catalog lists that generation only.

1generations18.5 mof film for a full wrap

Honda Orthia, first generation, factory photo
Honda Orthia, first generation. Factory color shown.

Honda Orthia wrap colors and ideas

  • Orthia black wrap
  • Orthia white wrap
  • Orthia gray wrap
  • Orthia silver wrap
  • Orthia red wrap
  • Orthia blue wrap
  • Orthia green wrap
  • Orthia yellow wrap
  • Orthia orange wrap
  • Orthia purple wrap
  • Orthia pink wrap
  • Orthia teal wrap
  • Orthia brown wrap
  • Orthia gold wrap
  • Orthia chrome wrap
  • Orthia color shift wrap
  • Orthia carbon fiber wrap
  • Orthia camo and patterned wrap

How much vinyl to wrap a Honda Orthia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2002wagon (5 doors)179.9 in (4,570 mm) to 182.5 in (4,635 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Orthia wrap cost factors

The Orthia wrap cost depends on the size of the car, the film you choose, and the amount of labor. This wagon is 179.9 in (4,570 mm) to 182.5 in (4,635 mm) long, so a full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) film. Extra work like removing trim, wrapping the tailgate edge, or doing a chrome delete adds labor time. The final number also changes with the finish, such as gloss, satin, matte, or textured film.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1997: bumpers and lights differ between the versions, and so do the film cuts.

Orthia wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Orthia, first generation, factory photo
Factory color shown

1996–2002 Orthia wagon (first generation)

1996–2002wagon (5 doors)179.9 in (4,570 mm) to 182.5 in (4,635 mm)

The first generation Honda Orthia was built from 1996 to 2002 and restyled once, in 1997. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. A wrap installer must check the production year before cutting pre-sized panels for the front and rear. The rest of the body, including the tailgate with its glass, stayed the same.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Orthia

A partial wrap on the Honda Orthia can cover the roof, hood, or mirror caps in a contrasting color. An Orthia chrome delete covers the window trim and badges with black film, and it can be done alone or with a full wrap. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Orthia: body, cut-outs and film

A Honda Orthia vinyl wrap follows the shape of a compact five-door wagon that is 179.9 in (4,570 mm) to 182.5 in (4,635 mm) long. The simple, straight sides mean wide cast film lays down without much stretching. The large tailgate adds area, but most of it is glass, so the film only covers the metal edges. Shops can wrap the whole body with two or three people in a single working day.

Orthia wrap ideas start with a color change in gloss, satin, or matte film. A chrome delete with black film works well on the window trim and badges. The tailgate has the rear glass set into it, so the film ends cleanly at the edge of the glass. You can also add paint protection film (PPF) on the front bumper, hood, and mirror caps before the color wrap.

To know how much vinyl to wrap an Orthia, use the full-body estimate of about 61 ft (18.5 m) for a 60-inch (1.52 m) roll. The restyling in 1997 changed the bumpers and lights, so film cut for one version does not fit the other. That means pre-cut kits may not match every year, and a shop will measure your exact car before cutting. Buying a little extra film is the safe way to cover waste from trimming.

Questions about wrapping a Honda Orthia

How much vinyl does it take to wrap a Honda Orthia?

Yes, a full wrap on a Honda Orthia takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you want chrome or patterned film, the estimate is about 70 ft (21.5 m) because the pattern must be matched. These figures cover the newest body after the 1997 restyling.

Which years of the Orthia take the same film cuts?

The same film cuts fit the Orthia only if the car is from the same version: 1996 to early 1997, or late 1997 to 2002. The restyling in 1997 changed the bumpers and lights, so film shaped for the older parts will not fit the newer ones. A shop will measure your car to make correct patterns.

Can I wrap only the hood or the roof of an Orthia?

Yes, you can wrap only the hood, the roof, or the mirror caps of an Orthia as a partial wrap. A chrome delete on the window trim and badges is another way to change the look without a full wrap. Clear paint protection film (PPF) on the front end is also available as a smaller job.

Is an Orthia hard to wrap?

The Orthia is average to wrap, but the tailgate adds some work because the rear glass is set into it, so film must end exactly at the glass edge. The car is a compact wagon with fairly flat panels, so there is not much deep recessing or many sharp curves. The restyling means you must have the correct bumper and light patterns if you buy pre-cut film. With careful measurement and a little extra film, a shop can wrap it cleanly.