Wraps by car

Honda Partner wrap

The Honda Partner wrap page covers both generations of this compact wagon and the vinyl wrap film a full wrap of the newest body takes. The first generation was produced from 1996 to 2006, and the second generation followed from 2006 to 2010. A complete color change on a second-generation Partner uses about 59 ft (18 m) of 60-inch (1.52 m) cast film.

2generations18 mof film for a full wrap

Honda Partner, second generation, factory photo
Honda Partner, second generation. Factory color shown.

Honda Partner wrap colors and ideas

  • Partner black wrap
  • Partner white wrap
  • Partner gray wrap
  • Partner silver wrap
  • Partner red wrap
  • Partner blue wrap
  • Partner green wrap
  • Partner yellow wrap
  • Partner orange wrap
  • Partner purple wrap
  • Partner pink wrap
  • Partner teal wrap
  • Partner brown wrap
  • Partner gold wrap
  • Partner chrome wrap
  • Partner color shift wrap
  • Partner carbon fiber wrap
  • Partner camo and patterned wrap

How much vinyl to wrap a Honda Partner

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010wagon (5 doors)171.3 in (4,350 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1996–2006wagon (5 doors)179.9 in (4,570 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Partner wrap cost factors

Partner wrap cost depends on the amount of film, the number of panels, and the condition of the paint on this car. The first-generation length of 179.9 in (4,570 mm) and the second-generation length of 171.3 in (4,350 mm) change how much material the installer orders. The tailgate with the rear glass in it adds cut-out work that affects the labor part of the quote. Paint age also matters, because original or repainted panels need a test spot before the wrap goes on.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Partner wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Partner, second generation, factory photo
Factory color shown

2006–2010 Partner wagon (second generation)

2006–2010wagon (5 doors)171.3 in (4,350 mm)

The second-generation Honda Partner was built from 2006 to 2010 as a five-door wagon with a length of 171.3 in (4,350 mm). Paint age is a real factor on a car of these years, since panels may be original or repainted. A test spot comes before a full wrap to check that the film adheres evenly to the existing finish. Even a well-kept Partner from this period should be inspected panel by panel before the vinyl goes on.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Honda Partner, first generation, factory photo
Factory color shown

1996–2006 Partner wagon (first generation)

1996–2006wagon (5 doors)179.9 in (4,570 mm)

The first-generation Honda Partner was produced from 1996 to 2006 as a five-door wagon with a length of 179.9 in (4,570 mm). This body style has a tall roof and a tailgate with the rear glass in it, so the amount of film and the number of panels are both affected. The longer body uses about 54 ft (16.5 m) of 60-inch cast film for a full wrap, with a higher estimate for chrome or patterned film. The rear glass cut-out means the tailgate is wrapped as a surrounding panel rather than one flat sheet.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Partner

A Partner can be wrapped in smaller jobs than a full color change. A partial wrap covers the roof, hood, and mirror caps, leaving the rest of the body in the original paint. Chrome delete uses black film on the window trim and badges to cover the bright pieces. Paint protection film (PPF) is applied as a clear film on the front end of the Partner for a less visible shield.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Partner: body, cut-outs and film

A Honda Partner vinyl wrap fits a five-door wagon body with a single length per generation. The first generation measures 179.9 in (4,570 mm), so a full wrap needs about 54 ft (16.5 m) of 60-inch film. The second generation is shorter at 171.3 in (4,350 mm), which raises the full wrap estimate to about 59 ft (18 m) of the same film. Panel count stays the same for both, but the newer body has slightly larger roof and tailgate areas.

Partner wrap ideas start with the tailgate, because the rear glass is set into the tailgate itself. The film ends at the edge of the glass, so the installer cuts around the window rather than wrapping the whole panel. The door handles, mirrors, and roof rails also need cut-outs or removal for a clean install. Working around the tailgate glass adds time to the job but keeps the wrap looking factory-finished.

Knowing how much vinyl to wrap a Partner means counting the change in overall length between generations. The first-generation wagon is 179.9 in (4,570 mm) long and needs about 54 ft (16.5 m) of 60-inch cast film for a full wrap. The second-generation model is 171.3 in (4,350 mm) long and uses about 59 ft (18 m) of the same film. A patterned or chrome film increases the estimate to about 69 ft (21 m) on the first generation and about 67 ft (20.5 m) on the second.

Questions about wrapping a Honda Partner

How much vinyl does it take to wrap a Honda Partner?

A second-generation Honda Partner takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. That figure covers the five-door wagon body, including the tailgate cut-out around the rear glass. The estimate is for a standard color change film, not a chrome or patterned film. The first-generation body is longer and uses a different amount of film.

Can I wrap only the hood or the roof of a Partner?

Yes, you can wrap only the hood or the roof of a Partner. A partial wrap on this car covers the roof, hood, and mirror caps as separate sections without touching the doors or tailgate. That choice leaves the rest of the paint visible and uses less film than a full wrap. The roof on a Partner is a single large panel, so it is a straightforward starting point for a partial wrap.

Is a Partner hard to wrap?

A Partner is not especially hard to wrap, but the tailgate adds work because the rear glass is set into the panel. The film must end at the edge of the glass, so the installer trims and tucks around the window rather than wrapping it. The wagon body also has a tall roof and a long side surface, which means more material and careful panel alignment. Overall, it is a manageable job for an installer with wagon experience.

How many generations of the Partner does this page cover?

This page covers two generations of the Honda Partner. The first generation ran from 1996 to 2006, and the second generation ran from 2006 to 2010. Both are five-door wagons, but they differ in length and film amount. The second generation is the newest body and takes about 59 ft (18 m) of 60-inch cast film for a full wrap.