Wraps by car

Honda Prelude wrap

The Honda Prelude wrap page covers this sports coupe through six generations. A full wrap of the newest body uses about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap. The fifth and fourth generations have similar film needs, while older models are slightly smaller. Each generation's dimensions and wrap requirements are listed below.

6generations15 mof film for a full wrap

Honda Prelude, sixth generation, factory photo
Honda Prelude, sixth generation. Factory color shown.

Honda Prelude wrap colors and ideas

  • Prelude black wrap
  • Prelude white wrap
  • Prelude gray wrap
  • Prelude silver wrap
  • Prelude red wrap
  • Prelude blue wrap
  • Prelude green wrap
  • Prelude yellow wrap
  • Prelude orange wrap
  • Prelude purple wrap
  • Prelude pink wrap
  • Prelude teal wrap
  • Prelude brown wrap
  • Prelude gold wrap
  • Prelude chrome wrap
  • Prelude color shift wrap
  • Prelude carbon fiber wrap
  • Prelude camo and patterned wrap

How much vinyl to wrap a Honda Prelude

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowcoupe (2 doors)178.0 in (4,520 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1996–2001coupe (2 doors)178.9 in (4,545 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1991–1996coupe (2 doors)174.8 in (4,440 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1987–1991coupe (2 doors)175.6 in (4,460 mm) to 178.0 in (4,520 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1982–1987coupe (2 doors)172.2 in (4,374 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1978–1982coupe (2 doors)161.0 in (4,090 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Prelude wrap cost factors

Prelude wrap cost depends on film choice and the car's size. A full wrap of the newest body takes about 49 ft (15 m) of cast film, while chrome or patterned film needs about 62 ft (19 m). The two long doors add labor time because each door is one large piece that must be handled carefully. Partial jobs like the hood or roof use less material and cost less in labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Prelude wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Prelude, sixth generation, factory photo
Factory color shown

2025–now Prelude coupe (sixth generation)

2025–nowcoupe (2 doors)178.0 in (4,520 mm)

The sixth generation Honda Prelude is a coupe with a length of 178.0 in (4,520 mm). Two long side doors are each wrapped with one large piece of film. A full wrap uses about 49 ft (15 m) of 60-inch cast film for standard color. Patterned or chrome film raises the estimate to about 62 ft (19 m).

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Honda Prelude, fifth generation, factory photo
Factory color shown

1996–2001 Prelude coupe (fifth generation)

1996–2001coupe (2 doors)178.9 in (4,545 mm)

The fifth generation Honda Prelude was built from 1996 to 2001 and may have original or repainted panels. A test spot on the paint is important before a full wrap to check adhesion and condition. The coupe body is 178.9 in (4,545 mm) long and uses about 49 ft (15 m) of standard film. Its two long doors need large film pieces, so smooth paint is essential.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Honda Prelude, fourth generation, factory photo
Factory color shown

1991–1996 Prelude coupe (fourth generation)

1991–1996coupe (2 doors)174.8 in (4,440 mm)

The fourth generation Honda Prelude is a coupe measuring 174.8 in (4,440 mm) in length. A full wrap requires about 49 ft (15 m) of 60-inch cast film, while chrome or patterned film takes about 54 ft (16.5 m). The two long side doors mean only a few large panels cover the car. Installers can wrap each door with one piece for a seamless look.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Honda Prelude, third generation, factory photo
Factory color shown

1987–1991 Prelude coupe (third generation)

1987–1991coupe (2 doors)175.6 in (4,460 mm) to 178.0 in (4,520 mm)

The third generation Honda Prelude received a restyling in 1989, changing the bumpers and lights. Film cut for one version does not fit the other, so the year matters when ordering a kit. The body length ranges from 175.6 in (4,460 mm) to 178.0 in (4,520 mm) depending on version. A full wrap uses about 49 ft (15 m) of standard film for either variant.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Honda Prelude, second generation, factory photo
Factory color shown

1982–1987 Prelude coupe (second generation)

1982–1987coupe (2 doors)172.2 in (4,374 mm)

The second generation Honda Prelude is a small coupe at 172.2 in (4,374 mm) long. A full wrap uses about 46 ft (14 m) of 60-inch cast film, less than later generations. Its two long side doors are each covered with one large piece of film. The compact body means fewer panels and a slightly faster wrap process.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Honda Prelude, first generation, factory photo
Factory color shown

1978–1982 Prelude coupe (first generation)

1978–1982coupe (2 doors)161.0 in (4,090 mm)

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Prelude

A Honda Prelude partial wrap often targets the roof, hood, or mirror caps. Prelude chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end guards against stone chips. These smaller jobs use less film than a full wrap and can be done quickly.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Honda Prelude: body, cut-outs and film

The Honda Prelude vinyl wrap depends on its coupe body and moderate size. All generations have two long side doors, which are each covered with one large piece of film. The newest model measures 178.0 in (4,520 mm) in length, making panel count low. A full wrap therefore requires fewer seams than a four-door car.

Prelude wrap ideas must account for two long side doors that each take one large film piece. No body cladding or complex trim needs removal on these coupes. Installers can focus on clean door edges and tight gaps around the windows. This simple body shape allows for crisp, continuous color or pattern across the sides.

Knowing how much vinyl to wrap a Prelude means comparing the generations. The newest and fourth generation bodies use about 49 ft (15 m) of standard film, while the second generation uses about 46 ft (14 m). Chrome or patterned film adds roughly 7 to 13 ft (2 to 4 m) depending on the year. The third generation changed in 1989, so film kits must match the exact version.

Questions about wrapping a Honda Prelude

How much vinyl does it take to wrap a Honda Prelude?

A Honda Prelude wrap of the newest body needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, budget about 62 ft (19 m). Older generations vary slightly, with the second generation using as little as 46 ft (14 m).

Can I wrap only the hood or the roof of a Prelude?

Yes, you can wrap only the hood or the roof of a Prelude. Common partial wrap areas are the roof, hood, and mirror caps. Chrome delete on window trim and badges is another focused option. Clear paint protection film on the front end is also a partial job.

Is a Prelude hard to wrap?

A Prelude is not hard to wrap, but the two long side doors add work. Each door is one large piece of film, which requires careful handling to avoid wrinkles. The coupe's size, such as 178.0 in (4,520 mm) on the newest model, means moderate material use. Installers with experience on large panels will find it straightforward.

How many generations of the Prelude does this page cover?

This page covers six generations of the Honda Prelude. They range from the fifth generation (1996–2001) to the newest sixth generation (2025–now). Each generation's film estimates and body details are provided in its own section.