Wraps by car

Honda S2000 wrap

This page covers the Honda S2000 vinyl wrap, a two-door convertible sports car produced across one generation from 1999 to 2010. A full wrap of the first-generation body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film uses about 49 ft (15 m).

1generations12.5 mof film for a full wrap

Honda S2000, first generation, factory photo
Honda S2000, first generation. Factory color shown.

Honda S2000 wrap colors and ideas

  • Honda S2000 black wrap
  • Honda S2000 white wrap
  • Honda S2000 gray wrap
  • Honda S2000 silver wrap
  • Honda S2000 red wrap
  • Honda S2000 blue wrap
  • Honda S2000 green wrap
  • Honda S2000 yellow wrap
  • Honda S2000 orange wrap
  • Honda S2000 purple wrap
  • Honda S2000 pink wrap
  • Honda S2000 teal wrap
  • Honda S2000 brown wrap
  • Honda S2000 gold wrap
  • Honda S2000 chrome wrap
  • Honda S2000 color shift wrap
  • Honda S2000 carbon fiber wrap
  • Honda S2000 camo and patterned wrap

How much vinyl to wrap a Honda S2000

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2010convertible (2 doors)162.8 in (4,135 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Honda S2000 wrap cost factors

Honda S2000 wrap cost depends on material and labor, with the car's compact convertible body affecting both. A full wrap needs about 41 ft (12.5 m) of 60-inch (1.52 m) film, more if chrome or patterned film is used. The fabric top reduces coverage but adds time for masking the edges where the film ends.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Restyled in 2003: bumpers and lights differ between the versions, and so do the film cuts.

Honda S2000 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda S2000, first generation, factory photo
Factory color shown

1999–2010 Honda S2000 convertible (first generation)

1999–2010convertible (2 doors)162.8 in (4,135 mm)

The first-generation Honda S2000 has a fabric convertible top that is not wrapped, and the film ends where the top begins. The top is left uncovered, so the wrap covers the painted panels only. The film edge is tucked and trimmed along the top's seal for a neat finish.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Honda S2000

For smaller jobs on the Honda S2000, a partial wrap covers the hood, mirror caps, or rear deck. Chrome delete replaces the bright window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda S2000: body, cut-outs and film

A Honda S2000 vinyl wrap suits the car's compact convertible shape, with a length of 162.8 in (4,135 mm). The fabric top is not wrapped, so the film ends where the top begins. The small body and two doors keep the material estimate lower than on larger roadsters.

Honda S2000 wrap ideas work around the convertible body and the panel layout of the car. The fabric top is left unwrapped and the film ends where it begins. Door handles and mirror caps come off for a clean edge along the doors. The front bumper and side skirts stay on the car during a full wrap.

How much vinyl to wrap a Honda S2000 depends on the production years, because the car was restyled in 2003 within its single generation. Pre-2003 and 2003–2010 cars share the same overall length of 162.8 in (4,135 mm). A full wrap of any first-generation S2000 takes the same 41 ft (12.5 m) of cast film.

Questions about wrapping a Honda S2000

How much vinyl does it take to wrap a Honda S2000?

A Honda S2000 takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That figure covers the painted body panels of the convertible, leaving the fabric top unwrapped.

Is the top of a Honda S2000 wrapped?

No, the top of a Honda S2000 is not wrapped because it is a fabric convertible top. The film ends where the top begins, leaving the top uncovered.

Which years of the Honda S2000 take the same film cuts?

All Honda S2000 models from 1999 to 2010 use the same film cuts despite the 2003 restyling. The body dimensions stayed the same, so one pattern works for the entire generation.

Can I wrap only the hood or the roof of a Honda S2000?

Yes, you can wrap only the hood or the rear deck of a Honda S2000 as a partial wrap. The roof panel does not exist on this convertible, so a roof wrap is not an option.