Wraps by car

Honda S500 wrap

The Honda S500 wrap page covers the first generation from 1963 to 1964 in the convertible body style. A full vinyl wrap of the convertible uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 56 ft (17 m).

1generations11.5 mof film for a full wrap

Honda S500, first generation, factory photo
Honda S500, first generation. Factory color shown.

Honda S500 wrap colors and ideas

  • Honda S500 black wrap
  • Honda S500 white wrap
  • Honda S500 gray wrap
  • Honda S500 silver wrap
  • Honda S500 red wrap
  • Honda S500 blue wrap
  • Honda S500 green wrap
  • Honda S500 yellow wrap
  • Honda S500 orange wrap
  • Honda S500 purple wrap
  • Honda S500 pink wrap
  • Honda S500 teal wrap
  • Honda S500 brown wrap
  • Honda S500 gold wrap
  • Honda S500 chrome wrap
  • Honda S500 color shift wrap
  • Honda S500 carbon fiber wrap
  • Honda S500 camo and patterned wrap

How much vinyl to wrap a Honda S500

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1964convertible (2 doors)129.9 in (3,300 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Honda S500 wrap cost factors

A Honda S500 wrap cost depends on the number of panels and the film you pick. This mini convertible has a small 129.9 in (3,300 mm) body, so material use is lower than on larger cars. Chrome or patterned film needs about 56 ft (17 m), while standard cast film needs about 38 ft (11.5 m). The wrap shop's labor also changes with the film's stretch and the body's curves.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Honda S500 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda S500, first generation, factory photo
Factory color shown

1963–1964 Honda S500 convertible (first generation)

1963–1964convertible (2 doors)129.9 in (3,300 mm)

The first generation Honda S500 from 1963–1964 is a convertible with a fabric top. The open top is not wrapped, and the vinyl film ends where the fabric begins. A folding hard top, if fitted, is wrapped as separate panels of its own. For the standard soft top, the installer trims the film neatly along the top edges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Honda S500

Honda S500 chrome delete covers the window trim and badges with black film. A partial wrap on this car can cover the hood, mirror caps, or rear deck. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without touching the fabric top.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda S500: body, cut-outs and film

The Honda S500 is a mini convertible measuring 129.9 in (3,300 mm) long with two doors. A Honda S500 vinyl wrap covers every painted panel of this compact body. The small size keeps material needs moderate for a full color change wrap. The fabric top is not wrapped, so the film ends where the top begins.

Honda S500 wrap ideas include covering the hood, mirror caps, and rear deck as separate jobs. The fabric top is left unwrapped and the film ends at its edges. A chrome delete (bright trim covered with black film) suits the window trim and badges. Badges and trim pieces are small, so they take steady hand work.

How much vinyl to wrap a Honda S500 depends on the film type you choose. A full wrap of this first generation takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film is less stretchy, so you need about 56 ft (17 m). The single generation from 1963–1964 has one body style, so the estimate stays the same.

Questions about wrapping a Honda S500

How much vinyl does it take to wrap a Honda S500?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap a Honda S500. This figure covers the standard first generation convertible body from 1963–1964. If you choose chrome or patterned film, the estimate rises to about 56 ft (17 m).

Is the top of a Honda S500 wrapped?

No, the fabric top of a Honda S500 is not wrapped. The vinyl film ends where the fabric top begins, leaving the soft top in its original material. Only painted body panels are covered during a wrap.

Can I wrap only the hood or the roof of a Honda S500?

Yes, you can wrap only the hood or the roof area of a Honda S500. The convertible has no fixed roof, but a partial wrap can cover the hood, mirror caps, or rear deck. Chrome delete on the window trim and badges is another way to change the look without a full wrap.

Is a Honda S500 hard to wrap?

A Honda S500 is easier to wrap than many cars because of its small 129.9 in (3,300 mm) length. The convertible body means the fabric top is not wrapped, so the film ends where the top begins. A folding hard top, if present, is wrapped as separate panels, which adds a few seams. Steady hand work is needed around badges and trim, but the overall size keeps the job manageable.