Wraps by car

Honda S600 wrap

The Honda S600 wrap page covers the first generation roadster made from 1964 to 1966. A full wrap of this small convertible takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds up to roughly 39 ft (12 m) for the same body.

1generations9.5 mof film for a full wrap

Honda S600, first generation, factory photo
Honda S600, first generation. Factory color shown.

Honda S600 wrap colors and ideas

  • Honda S600 black wrap
  • Honda S600 white wrap
  • Honda S600 gray wrap
  • Honda S600 silver wrap
  • Honda S600 red wrap
  • Honda S600 blue wrap
  • Honda S600 green wrap
  • Honda S600 yellow wrap
  • Honda S600 orange wrap
  • Honda S600 purple wrap
  • Honda S600 pink wrap
  • Honda S600 teal wrap
  • Honda S600 brown wrap
  • Honda S600 gold wrap
  • Honda S600 chrome wrap
  • Honda S600 color shift wrap
  • Honda S600 carbon fiber wrap
  • Honda S600 camo and patterned wrap

How much vinyl to wrap a Honda S600

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1966convertible (2 doors)129.9 in (3,300 mm)about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m)

Honda S600 wrap cost factors

Honda S600 wrap cost is driven by the amount of film and the time to wrap a 129.9 in (3,300 mm) classic convertible. The main estimate is about 31 ft (9.5 m) of cast film, but chrome or patterned film can raise the total to about 39 ft (12 m). Body condition and any trim that needs extra attention also change the labor.

  • Film for a full wrap: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Honda S600 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda S600, first generation, factory photo
Factory color shown

1964–1966 Honda S600 convertible (first generation)

1964–1966convertible (2 doors)129.9 in (3,300 mm)

The first generation Honda S600 has an open top that is not wrapped and the film ends where the top begins. A folding hard top, if fitted, is wrapped as panels of its own rather than as part of the body. This keeps the fabric or folding panels free of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).

Roof, hood, chrome delete and PPF on a Honda S600

The Honda S600 can receive a partial wrap on the hood, mirror caps, or rear deck instead of a full color change. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is a clear option for this small roadster.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda S600: body, cut-outs and film

The Honda S600 vinyl wrap has to follow the compact dimensions of a 129.9 in (3,300 mm) convertible. Its single two-door body style keeps the main surfaces simple, with no separate roof to cover. The small footprint means a full color change uses less film than on a modern sedan.

Honda S600 wrap ideas start with leaving the fabric top unwrapped and stopping the film where the top begins. On this convertible, a folding hard top would be wrapped as its own set of panels. No extra film is reserved for a fixed roof because the body has none.

How much vinyl to wrap a Honda S600 depends on the generation, and this car has only one. For the 1964–1966 body, plan for about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, increase that to about 39 ft (12 m).

Questions about wrapping a Honda S600

How much vinyl does it take to wrap a Honda S600?

A Honda S600 takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the estimate rises to about 39 ft (12 m).

Is the top of a Honda S600 wrapped?

No, the top of a Honda S600 is not wrapped because it is a fabric convertible top. The film ends where the top meets the body, and a folding hard top is wrapped as separate panels.

Can I wrap only the hood or the roof of a Honda S600?

Yes, you can wrap only the hood, mirror caps, or rear deck of a Honda S600 as a partial wrap. A chrome delete on the window trim and badges is another smaller option.

Is a Honda S600 hard to wrap?

A Honda S600 is less work than larger cars because it is small, but the convertible top adds care around the edges. The film must end cleanly at the fabric top, and a folding hard top needs its own panel work.