Wraps by car

Honda Saber wrap

A Honda Saber wrap covers the full-size sedan built from 1995 to 2003. The catalog spans two generations of this model. The newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap.

2generations16.5 mof film for a full wrap

Honda Saber, second generation, factory photo
Honda Saber, second generation. Factory color shown.

Honda Saber wrap colors and ideas

  • Saber black wrap
  • Saber white wrap
  • Saber gray wrap
  • Saber silver wrap
  • Saber red wrap
  • Saber blue wrap
  • Saber green wrap
  • Saber yellow wrap
  • Saber orange wrap
  • Saber purple wrap
  • Saber pink wrap
  • Saber teal wrap
  • Saber brown wrap
  • Saber gold wrap
  • Saber chrome wrap
  • Saber color shift wrap
  • Saber carbon fiber wrap
  • Saber camo and patterned wrap

How much vinyl to wrap a Honda Saber

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003sedan (4 doors)190.6 in (4,840 mm) to 191.3 in (4,860 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1995–1998sedan (4 doors)190.6 in (4,840 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Saber wrap cost factors

Saber wrap cost depends on the film type, the body areas and the labor for this full-size sedan. A full wrap of the second generation needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film adds about 20% more. The 190.6 in (4,840 mm) to 191.3 in (4,860 mm) body length means more surface area than a compact car.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2001: bumpers and lights differ between the versions, and so do the film cuts.

Saber wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Saber, second generation, factory photo
Factory color shown

1998–2003 Saber sedan (second generation)

1998–2003sedan (4 doors)190.6 in (4,840 mm) to 191.3 in (4,860 mm)

The second generation Honda Saber ran from 1998 to 2003 with a restyling in 2001. The bumpers and lights changed in 2001, so film cut for one version does not fit the other. The body length stayed between 190.6 in (4,840 mm) and 191.3 in (4,860 mm), keeping the same four-door sedan shape.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Honda Saber, first generation, factory photo
Factory color shown

1995–1998 Saber sedan (first generation)

1995–1998sedan (4 doors)190.6 in (4,840 mm)

The first generation Honda Saber ran from 1995 to 1998 as a four-door sedan. Paint age on a car of these years is a key factor: panels may be original or repainted. A wrap installer does a test spot before a full wrap to check paint condition and adhesion.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Saber

A partial wrap on a Honda Saber can cover the roof, hood or mirror caps. An alternative is a Saber chrome delete, where the window trim and badges are covered with black film. For protection, a paint protection film (PPF) can be installed as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Saber: body, cut-outs and film

The Honda Saber vinyl wrap follows a four-door sedan body in both generations. Its length runs from 190.6 in (4,840 mm) to 191.3 in (4,860 mm), so every panel is large. Installers count the roof, hood, trunk, doors, fenders and bumpers as separate areas when planning film.

Saber wrap ideas start with the door handles, badges and side mirrors, which need cut-outs or come off. The bumpers and front grille also require precise trimming around lights and trim. Removing these small parts gives cleaner edges and fewer seams.

When figuring how much vinyl to wrap a Saber, the two generations differ slightly. The first generation from 1995–1998 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The second generation from 1998–2003 takes about 54 ft (16.5 m), and its 2001 restyling changed bumpers and lights, so film cut for one version does not fit the other.

Questions about wrapping a Honda Saber

How much vinyl does it take to wrap a Honda Saber?

A Honda Saber wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for the newest body. That estimate covers a full vinyl wrap of the second generation sedan. The figure reflects the full-size body and its panel count.

Which years of the Saber take the same film cuts?

The years that take the same film cuts on a Saber are 1998–2001 for the pre-restyling second generation, and 2001–2003 for the post-restyling version. The first generation from 1995 to 1998 has its own cuts for the 190.6 in (4,840 mm) body. The 2001 restyling changed bumpers and lights, so those cuts do not interchange.

Can I wrap only the hood or the roof of a Saber?

Yes, you can wrap only the hood or the roof of a Saber. The partial wrap options for this car include the roof, hood and mirror caps. A shorter job like a hood wrap uses less film and takes less time than a full wrap.

Is a Saber hard to wrap?

A Saber is not unusually hard to wrap, but its full-size body adds work. The 190.6 in (4,840 mm) to 191.3 in (4,860 mm) length means long roof and quarter panels. The wrap installer also spends time on the bumpers, where the film must be tucked and trimmed around lights and grilles.