Wraps by car

Honda Street wrap

The Honda Street wrap page covers the second generation van built from 1988 to 1999, one of one generation in the catalog. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 56 ft (17 m). The page details the body, the work behind the sliding doors, and the smaller wrap jobs.

1generations15 mof film for a full wrap

Honda Street, second generation, factory photo
Honda Street, second generation. Factory color shown.

Honda Street wrap colors and ideas

  • Street black wrap
  • Street white wrap
  • Street gray wrap
  • Street silver wrap
  • Street red wrap
  • Street blue wrap
  • Street green wrap
  • Street yellow wrap
  • Street orange wrap
  • Street purple wrap
  • Street pink wrap
  • Street teal wrap
  • Street brown wrap
  • Street gold wrap
  • Street chrome wrap
  • Street color shift wrap
  • Street carbon fiber wrap
  • Street camo and patterned wrap

How much vinyl to wrap a Honda Street

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1999van (4 doors)125.8 in (3,195 mm) to 129.7 in (3,295 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Street wrap cost factors

Street wrap cost depends on the film area, the film type, and the labor on this van. A full wrap uses about 49 ft (15 m) of cast film, or about 56 ft (17 m) of chrome or patterned film. The sliding door tracks and the tall roof add time for cutting and platform work. The cost changes with the film finish and the amount of disassembly.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.
  • Restyled in 1993: bumpers and lights differ between the versions, and so do the film cuts.

Street wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Street, second generation, factory photo
Factory color shown

1988–1999 Street van (second generation)

1988–1999van (4 doors)125.8 in (3,195 mm) to 129.7 in (3,295 mm)

The second generation Honda Street, made from 1988 to 1999, has sliding side doors that decide where the film is cut. The tracks stay bare, so the vinyl cannot cross them. The wrap is cut along each track, and the door panel is wrapped up to that line. This keeps the door working and leaves a clean edge.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Street

Partial wrap on a Honda Street covers the roof, the hood, or the mirror caps without doing the whole van. Chrome delete for the window trim and badges uses black film to change the look. Paint protection film (PPF), a clear film, goes on the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Street: body, cut-outs and film

A Honda Street vinyl wrap has to follow a compact minivan body that is tall and nearly square. The van is 125.8 in (3,195 mm) to 129.7 in (3,295 mm) long and 73.6 in (1,870 mm) high. The height means the roof is wrapped from a platform, and the flat sides take film efficiently. The four-door van body leaves no complex curves on the main panels.

Street wrap ideas start with the sliding side doors, whose tracks stay bare. The film is cut along the tracks, so the door panels are wrapped in sections. A tall body means the roof is wrapped from a platform, not from the ground. The window trim and badges are wrapped or left alone as separate details.

If you count how much vinyl to wrap a Street, the same body size runs through the whole generation. The second generation was restyled in 1993, and that changes the bumper and light shapes, not the amount of film. A length of 125.8 in (3,195 mm) to 129.7 in (3,295 mm) fits the same estimate of about 49 ft (15 m). Chrome or patterned film adds about 7 ft (2 m) to the total.

Questions about wrapping a Honda Street

How much vinyl does it take to wrap a Honda Street?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Honda Street. That figure is for the newest body of the second generation. If you use chrome or patterned film, plan for about 56 ft (17 m). The estimate covers a full exterior wrap with the film cut around the sliding door tracks.

Are the sliding doors of a Street wrapped?

Yes, the sliding doors of a Honda Street are wrapped, but the tracks stay bare. The film is cut along the tracks so the door can still open. The door panel is wrapped on both sides of the track. This is a standard part of a full wrap on this van.

Which years of the Street take the same film cuts?

The film cuts are the same for 1988 to 1993 and for 1993 to 1999, because the Street was restyled in 1993. All years of the second generation share the same body shell and sliding door tracks. The restyle changes the bumpers and lights, which can affect those small pieces. The main panel cuts stay the same across the generation.

Can I wrap only the hood or the roof of a Street?

Yes, you can wrap only the hood or the roof of a Honda Street. A partial wrap covers the roof, the hood, or the mirror caps without doing the whole van. Chrome delete for the window trim and badges is another small job. Paint protection film (PPF), a clear film, can be applied to just the front end.