Wraps by car

Honda Zest wrap

The Honda Zest wrap covers the single generation of this mini hatchback, produced from 2006 to 2012. The first-generation Zest is a five-door hatchback with a length of 133.7 in (3,395 mm). A full vinyl wrap of this body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 52 ft (16 m).

1generations13.5 mof film for a full wrap

Honda Zest, first generation, factory photo
Honda Zest, first generation. Factory color shown.

Honda Zest wrap colors and ideas

  • Zest black wrap
  • Zest white wrap
  • Zest gray wrap
  • Zest silver wrap
  • Zest red wrap
  • Zest blue wrap
  • Zest green wrap
  • Zest yellow wrap
  • Zest orange wrap
  • Zest purple wrap
  • Zest pink wrap
  • Zest teal wrap
  • Zest brown wrap
  • Zest gold wrap
  • Zest chrome wrap
  • Zest color shift wrap
  • Zest carbon fiber wrap
  • Zest camo and patterned wrap

How much vinyl to wrap a Honda Zest

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2012hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Zest wrap cost factors

A Zest wrap cost depends on the amount of film, its finish, and the labor for the car's specific parts. The standard estimate is about 44 ft of cast film, or 52 ft for chrome or patterned film, and that drives material cost. The tailgate with the rear glass in it adds time for careful trimming around the glass. The condition of the paint on a 2006–2012 Zest also affects preparation work.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Zest wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Zest, first generation, factory photo
Factory color shown

2006–2012 Zest hatchback (first generation)

2006–2012hatchback (5 doors)133.7 in (3,395 mm)

The first-generation Honda Zest, built from 2006 to 2012, is the only body this page covers. Because of the car's age, panels may be original or repainted, so a test spot comes before a full wrap. This generation has a five-door hatchback body with a tailgate that includes the rear glass. The length is 133.7 in (3,395 mm), and a full wrap needs about 44 ft of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Zest

A partial wrap on a Honda Zest includes the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film to change the brightwork. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on the same 2006–2012 body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Zest: body, cut-outs and film

A Honda Zest vinyl wrap is sized around the car's compact hatchback body. At 133.7 in (3,395 mm) long, the Zest has five doors and a tailgate that add seams and edges to work around. The car's small panels mean each piece of film is manageable, but the total area still calls for about 44 ft of film. Wrap installers often cut film for a Zest with less waste than on a larger sedan.

Zest wrap ideas begin with the one part that needs special attention: the tailgate with the rear glass in it. On the Zest, the film ends at the edge of the glass, so the installer trims carefully around the window. Door handles, mirrors, and badges are removed or cut out for a clean finish. A vinyl wrap on a Zest can follow the body lines without covering the rear glass.

To know how much vinyl to wrap a Zest, use the single generation's measurements. The first-generation Zest from 2006 to 2012 needs about 44 ft (13.5 m) of 60-inch film for a standard color change. If you choose chrome or patterned film, the estimate rises to about 52 ft (16 m) because of extra material for matching. The car's 133.7 in length is small, so one roll is enough for a full wrap.

Questions about wrapping a Honda Zest

How much vinyl does it take to wrap a Honda Zest?

A full wrap of a Honda Zest takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan on about 52 ft (16 m) to allow for pattern matching and the extra length. The estimate is based on the five-door hatchback body of the first generation.

Can I wrap only the hood or the roof of a Zest?

Yes, you can wrap only the hood or the roof of a Zest. A partial wrap on this car is often just the roof, the hood, or the mirror caps. The film for one panel is cut to the size of that part, which is much less than a full wrap.

Is a Zest hard to wrap?

A Honda Zest is not the easiest car to wrap because of the tailgate with the rear glass in it. The film ends at the edge of the glass, so the installer must trim carefully along that line. At 133.7 in (3,395 mm) long, the car's small size makes individual panels easy to handle, but the glass area adds work.

How many generations of the Zest does this page cover?

This page covers one generation of the Honda Zest. The first generation, produced from 2006 to 2012, is the only generation in the catalog.