Wraps by car

Hongqi E-HS3 wrap

This page covers a full vinyl wrap on the Hongqi E-HS3, an electric SUV produced since 2018 in one generation. The car is 176.8 in (4,490 mm) long with five doors. A complete wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Hongqi E-HS3, first generation, factory photo
Hongqi E-HS3, first generation. Factory color shown.

Hongqi E-HS3 wrap colors and ideas

  • E-HS3 black wrap
  • E-HS3 white wrap
  • E-HS3 gray wrap
  • E-HS3 silver wrap
  • E-HS3 red wrap
  • E-HS3 blue wrap
  • E-HS3 green wrap
  • E-HS3 yellow wrap
  • E-HS3 orange wrap
  • E-HS3 purple wrap
  • E-HS3 pink wrap
  • E-HS3 teal wrap
  • E-HS3 brown wrap
  • E-HS3 gold wrap
  • E-HS3 chrome wrap
  • E-HS3 color shift wrap
  • E-HS3 carbon fiber wrap
  • E-HS3 camo and patterned wrap

How much vinyl to wrap a Hongqi E-HS3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)176.8 in (4,490 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

E-HS3 wrap cost factors

E-HS3 wrap cost depends on the number of panels, the film type you pick, and whether you add cutouts or remove parts. The basic wrap needs enough film for five doors and the tailgate, and the charge port door adds a separate small piece. The electric SUV body avoids extra film for a long roof or complex bumpers.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

E-HS3 wraps by generation

Swipe sideways. Tap a card for the full description.

Hongqi E-HS3, first generation, factory photo
Factory color shown

2018–now E-HS3 SUV (first generation)

2018–nowSUV (5 doors)176.8 in (4,490 mm)

The first generation Hongqi E-HS3, made from 2018 to now, is an SUV with five doors and a length of 176.8 in (4,490 mm). This size means the wrap needs about 61 ft (18.5 m) of 60-inch (1.52 m) film for a standard color change. The five-door body gives you five large side panels plus the hood, roof and tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an E-HS3

For a partial wrap on the Hongqi E-HS3 you can cover just the roof, the hood, or the mirror caps. An E-HS3 chrome delete covers the window trim and badges with black film instead of bright metal. Paint protection film (PPF) is clear film applied to the front end of the SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hongqi E-HS3: body, cut-outs and film

A Hongqi E-HS3 vinyl wrap covers the whole SUV body including the five doors. The 176.8 in (4,490 mm) length and flat SUV panels keep the film usage within the standard estimate of about 61 ft (18.5 m). You need no extra film for a longer roof or taller doors on this body style.

E-HS3 wrap ideas start with the tailgate, where the film must end at the edge of the rear glass because the glass is set into the panel. The charge port door is an electric car detail that gets wrapped as its own small piece. Removing door handles or trim is not required for this body.

To see how much vinyl to wrap an E-HS3, you only need the current body because the catalog has one generation, 2018–now. The film estimate stays the same for every year, so no change affects the amount you buy. You can order about 61 ft (18.5 m) for a color change film or about 69 ft (21 m) for chrome or patterned film.

Questions about wrapping a Hongqi E-HS3

How much vinyl does it take to wrap a Hongqi E-HS3?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Hongqi E-HS3. This is the estimate for the newest body, which is the only generation in the catalog.

Can I wrap only the hood or the roof of an E-HS3?

Yes, you can wrap only the hood or the roof of an E-HS3. Partial wrap options include roof, hood, and mirror caps, so any of those panels can be done alone.

Is an E-HS3 hard to wrap?

An E-HS3 is not especially hard to wrap, but the tailgate with the rear glass in it adds a careful cut at the glass edge. The charge port door also requires its own small piece of film, which means one extra cutout on an electric car.

How many generations of the E-HS3 does this page cover?

This page covers one generation of the E-HS3. The first generation runs from 2018 to now, and all data on this page refers to that generation.