Wraps by car

Hongqi EHS7 wrap

This page covers the Hongqi EHS7 wrap, a full-size electric SUV built from 2024 onward. The catalog lists one generation of this model. A complete vinyl wrap of the current body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film.

1generations17 mof film for a full wrap

Hongqi EHS7, first generation, factory photo
Hongqi EHS7, first generation. Factory color shown.

Hongqi EHS7 wrap colors and ideas

  • Hongqi EHS7 black wrap
  • Hongqi EHS7 white wrap
  • Hongqi EHS7 gray wrap
  • Hongqi EHS7 silver wrap
  • Hongqi EHS7 red wrap
  • Hongqi EHS7 blue wrap
  • Hongqi EHS7 green wrap
  • Hongqi EHS7 yellow wrap
  • Hongqi EHS7 orange wrap
  • Hongqi EHS7 purple wrap
  • Hongqi EHS7 pink wrap
  • Hongqi EHS7 teal wrap
  • Hongqi EHS7 brown wrap
  • Hongqi EHS7 gold wrap
  • Hongqi EHS7 chrome wrap
  • Hongqi EHS7 color shift wrap
  • Hongqi EHS7 carbon fiber wrap
  • Hongqi EHS7 camo and patterned wrap

How much vinyl to wrap a Hongqi EHS7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)193.9 in (4,925 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Hongqi EHS7 wrap cost factors

A Hongqi EHS7 wrap cost depends on film choice, the areas covered, and the labor for the vehicle's size. A full wrap of this 193.9 in (4,925 mm) SUV needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, while chrome or patterned film raises the estimate to about 64 ft (19.5 m). Because every trim has sensors and cameras, cutting around each one adds installation time.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Hongqi EHS7 wraps by generation

Swipe sideways. Tap a card for the full description.

Hongqi EHS7, first generation, factory photo
Factory color shown

2024–now Hongqi EHS7 SUV (first generation)

2024–nowSUV (5 doors)193.9 in (4,925 mm)

The first generation Hongqi EHS7 has a panoramic glass roof on every trim, and that roof is not wrapped. The film ends at the roof rails, so the glass area keeps its dark factory color no matter which film shade is chosen for the body. This leaves a clean line between the wrapped metal panels and the open glass above.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Hongqi EHS7

A partial wrap on a Hongqi EHS7 can cover the hood, mirror caps, or tailgate without wrapping the whole SUV. A chrome delete turns the bright window trim and badges black with small pieces of film. Clear paint protection film (PPF) on the front end shields the nose from stone chips without changing the color.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hongqi EHS7: body, cut-outs and film

A Hongqi EHS7 vinyl wrap covers a five-door SUV measuring 193.9 in (4,925 mm) in length. The tall sides and large flat panels make film installation straightforward, but the long roof demands careful planning. Because the body has only one style, the same cutting templates work for every car from the first generation.

For Hongqi EHS7 wrap ideas, the key is planning around the fixed features of this electric SUV. Every trim has a panoramic glass roof, so the film stops at the roof rails and the glass stays uncovered. Parking sensors in the bumpers and cameras in the body need the film cut around each one, and the charge port door is wrapped as its own small piece.

If you are counting how much vinyl to wrap a Hongqi EHS7, the single generation keeps the estimate simple. The 2024–now body is the only version in the catalog, and its dimensions do not change between production years. You will not need different film amounts for older or newer examples of this model.

Questions about wrapping a Hongqi EHS7

How much vinyl does it take to wrap a Hongqi EHS7?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Hongqi EHS7. That figure is for a full cover of the 2024–now body, based on the single generation in the catalog. If you choose chrome or patterned film, plan for about 64 ft (19.5 m) instead.

Can the roof of a Hongqi EHS7 be wrapped?

No, the roof of a Hongqi EHS7 cannot be wrapped with vinyl film. Every trim of this model has a panoramic glass roof, and glass is never covered with wrap film. The film ends at the roof rails, so the glass area stays exposed and dark.

Can I wrap only the hood or the roof of a Hongqi EHS7?

Yes, you can wrap only the hood or the roof of a Hongqi EHS7 as a partial job. The hood is wrapped as a small piece, but the roof itself is glass and cannot be wrapped on any trim. A partial wrap can also include the mirror caps or the tailgate.

Is a Hongqi EHS7 hard to wrap?

A Hongqi EHS7 is moderately hard to wrap because of its fixed sensors, cameras, and glass roof. Every trim has parking sensors in the bumpers and cameras in the body, and the film must be cut around each one. The 193.9 in (4,925 mm) length also means handling large sheets of film over long panels.