Wraps by car

Hongqi LS7 wrap

The Hongqi LS7 wrap page covers the full-size SUV in its first generation, produced from 2022 to now. A full vinyl wrap of the newest body takes about 85 ft (26 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 97 ft (29.5 m). This page explains the body, film amounts, and the smaller wrap jobs owners ask for.

1generations26 mof film for a full wrap

Hongqi LS7, first generation, factory photo
Hongqi LS7, first generation. Factory color shown.

Hongqi LS7 wrap colors and ideas

  • Hongqi LS7 black wrap
  • Hongqi LS7 white wrap
  • Hongqi LS7 gray wrap
  • Hongqi LS7 silver wrap
  • Hongqi LS7 red wrap
  • Hongqi LS7 blue wrap
  • Hongqi LS7 green wrap
  • Hongqi LS7 yellow wrap
  • Hongqi LS7 orange wrap
  • Hongqi LS7 purple wrap
  • Hongqi LS7 pink wrap
  • Hongqi LS7 teal wrap
  • Hongqi LS7 brown wrap
  • Hongqi LS7 gold wrap
  • Hongqi LS7 chrome wrap
  • Hongqi LS7 color shift wrap
  • Hongqi LS7 carbon fiber wrap
  • Hongqi LS7 camo and patterned wrap

How much vinyl to wrap a Hongqi LS7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)224.2 in (5,695 mm)about 85 ft (26 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 97 ft (29.5 m)

Hongqi LS7 wrap cost factors

The Hongqi LS7 wrap cost depends on the size of the body, the film type, and the labor involved. A 224.2 in (5,695 mm) long SUV uses about 85 ft (26 m) of cast film for a full wrap. Chrome or patterned film increases the amount to about 97 ft (29.5 m). The roof work from a platform and the tailgate cut-out add time, which affects the final cost.

  • Film for a full wrap: about 85 ft (26 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 97 ft (29.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (78.1 in (1,985 mm)): the roof is wrapped from a platform.

Hongqi LS7 wraps by generation

Swipe sideways. Tap a card for the full description.

Hongqi LS7, first generation, factory photo
Factory color shown

2022–now Hongqi LS7 SUV (first generation)

2022–nowSUV (5 doors)224.2 in (5,695 mm)

The first generation Hongqi LS7, built from 2022 to now, is a tall SUV at 78.1 in (1,985 mm). Because of that height, the roof is wrapped from a platform rather than from the ground. That extra setup takes more time and requires a second person for safety. Installers account for this when quoting a full wrap on this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (78.1 in (1,985 mm)): the roof is wrapped from a platform.

Film: about 85 ft (26 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 97 ft (29.5 m).

Roof, hood, chrome delete and PPF on a Hongqi LS7

A partial wrap on a Hongqi LS7 can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is another option: clear film applied to the front end. These smaller jobs use less film than a full wrap and are easier to schedule.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hongqi LS7: body, cut-outs and film

The Hongqi LS7 vinyl wrap covers a 5-door SUV that is 224.2 in (5,695 mm) long and 78.1 in (1,985 mm) tall. That size means a full wrap uses more film and more working time than a mid-size SUV. The tall body requires a platform to reach the roof safely. The large panels are straightforward, but the sheer surface area adds labor to every step.

Hongqi LS7 wrap ideas start with the tailgate, which has the rear glass set into it. The film ends at the edge of the glass, so the installer trims precisely around that opening. The roof is wrapped from a platform because the body stands 78.1 in (1,985 mm) high. Door handles, badges, and trim pieces are removed or cut around for a clean finish.

How much vinyl to wrap a Hongqi LS7 depends on the generation, but only one generation exists in the catalog, from 2022 to now. For the first generation, a full wrap needs about 85 ft (26 m) of 60-inch cast film. If you choose chrome or patterned film, the estimate rises to about 97 ft (29.5 m). Counting film for this car means allowing for the height and the large tailgate.

Questions about wrapping a Hongqi LS7

How much vinyl does it take to wrap a Hongqi LS7?

It takes about 85 ft (26 m) of 60-inch (1.52 m) cast film to wrap a Hongqi LS7. If you choose chrome or patterned film, the amount is about 97 ft (29.5 m). These are the estimates for the first generation body from 2022 to now.

Can I wrap only the hood or the roof of a Hongqi LS7?

Yes, you can wrap only the hood or the roof of a Hongqi LS7. Partial wraps for the roof, hood, or mirror caps are common requests. A chrome delete on the window trim and badges is another smaller job. These options let you change the look without a full wrap.

Is a Hongqi LS7 hard to wrap?

Yes, a Hongqi LS7 is harder to wrap than a smaller SUV. The body is 78.1 in (1,985 mm) tall, so the roof must be wrapped from a platform. The tailgate has the rear glass set into it, and the film must end at the edge of that glass. The length of 224.2 in (5,695 mm) adds more surface area to cover.

How many generations of the Hongqi LS7 does this page cover?

This page covers one generation of the Hongqi LS7. The catalog lists only the first generation, produced from 2022 to now.