Wraps by car

Hongqi E-HS9 wrap

This page is a guide to wrapping the Hongqi E-HS9, a full-size electric SUV. We cover the first generation, built from 2022 to now. A complete vinyl wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film.

1generations21 mof film for a full wrap

Hongqi E-HS9, first generation, factory photo
Hongqi E-HS9, first generation. Factory color shown.

Hongqi E-HS9 wrap colors and ideas

  • E-HS9 black wrap
  • E-HS9 white wrap
  • E-HS9 gray wrap
  • E-HS9 silver wrap
  • E-HS9 red wrap
  • E-HS9 blue wrap
  • E-HS9 green wrap
  • E-HS9 yellow wrap
  • E-HS9 orange wrap
  • E-HS9 purple wrap
  • E-HS9 pink wrap
  • E-HS9 teal wrap
  • E-HS9 brown wrap
  • E-HS9 gold wrap
  • E-HS9 chrome wrap
  • E-HS9 color shift wrap
  • E-HS9 carbon fiber wrap
  • E-HS9 camo and patterned wrap

How much vinyl to wrap a Hongqi E-HS9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)205.1 in (5,209 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

E-HS9 wrap cost factors

E-HS9 wrap cost depends mainly on the size of the vehicle and the film type. The wrap requires about 69 ft (21 m) of film, which takes more material and labor than a compact car. A chrome or patterned film uses about 80 ft (24.5 m), adding to the total. The number of cut-outs and removed parts, like roof rails and sensors, also affects the final cost.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has flush door handles: each handle is wrapped as a small piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

E-HS9 wraps by generation

Swipe sideways. Tap a card for the full description.

Hongqi E-HS9, first generation, factory photo
Factory color shown

2022–now E-HS9 SUV (first generation)

2022–nowSUV (5 doors)205.1 in (5,209 mm)

The first generation of the E-HS9 has roof rails on every trim. During a full wrap, installers can remove the roof rails before wrapping the roof. If removal is not desired, the film is cut along the roof rails.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has flush door handles: each handle is wrapped as a small piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on an E-HS9

A partial wrap on the E-HS9 can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is available as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hongqi E-HS9: body, cut-outs and film

The Hongqi E-HS9 is a large five-door SUV with a length of 205.1 in (5,209 mm). Its size means a full vinyl wrap uses more film than a smaller vehicle. The body has only one body style, so every car has the same basic panel layout.

For an E-HS9 wrap, installers need to plan for several details. The tailgate includes the rear glass, so the film ends at the edge of that glass. Roof rails are standard on every trim, and they come off before the roof is wrapped, or the film is cut along them. Flush door handles, parking sensors, and cameras also require careful cutting around each component.

If you are counting film for an E-HS9, the charge port door is one extra piece. Because the first generation has been produced since 2022, there are no earlier body styles to compare. The amount of vinyl needed stays the same for all years of this generation.

Questions about wrapping a Hongqi E-HS9

How much vinyl does it take to wrap a Hongqi E-HS9?

A full Hongqi E-HS9 wrap takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. That figure is for a standard color change wrap on the newest body. Chrome or patterned film needs about 80 ft (24.5 m).

Can I wrap only the hood or the roof of an E-HS9?

Yes, you can wrap only the hood or the roof of an E-HS9. Partial wraps often cover the roof, hood, or mirror caps. The wrap shop can also do a chrome delete on the window trim and badges.

Is an E-HS9 hard to wrap?

An E-HS9 is more involved to wrap than a smaller SUV because of its large size and several features. The length of 205.1 in (5,209 mm) means more film and more time. Installers must work around the tailgate glass, roof rails, flush door handles, parking sensors, and cameras. The charge port door is wrapped as a separate piece.

How many generations of the E-HS9 does this page cover?

This page covers one generation of the Hongqi E-HS9. It is the first generation, produced from 2022 to now.