Wraps by car

Hongqi HS7 wrap

The Hongqi HS7 wrap page covers the first generation of this full-size SUV, produced from 2019 to now. A full vinyl wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. This page explains the wrap process, film amounts, and the jobs that suit this vehicle.

1generations20.5 mof film for a full wrap

Hongqi HS7, first generation, factory photo
Hongqi HS7, first generation. Factory color shown.

Hongqi HS7 wrap colors and ideas

  • Hongqi HS7 black wrap
  • Hongqi HS7 white wrap
  • Hongqi HS7 gray wrap
  • Hongqi HS7 silver wrap
  • Hongqi HS7 red wrap
  • Hongqi HS7 blue wrap
  • Hongqi HS7 green wrap
  • Hongqi HS7 yellow wrap
  • Hongqi HS7 orange wrap
  • Hongqi HS7 purple wrap
  • Hongqi HS7 pink wrap
  • Hongqi HS7 teal wrap
  • Hongqi HS7 brown wrap
  • Hongqi HS7 gold wrap
  • Hongqi HS7 chrome wrap
  • Hongqi HS7 color shift wrap
  • Hongqi HS7 carbon fiber wrap
  • Hongqi HS7 camo and patterned wrap

How much vinyl to wrap a Hongqi HS7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)198.2 in (5,035 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Hongqi HS7 wrap cost factors

A Hongqi HS7 wrap cost depends on the film, the areas covered, and the labor involved. The full body needs about 67 ft (20.5 m) of cast film, while chrome or patterned film takes about 85 ft (26 m). The tall roof adds setup time because installers use a platform. Partial jobs like a hood wrap cost less than a full color change.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (70.0 in (1,778 mm)): the roof is wrapped from a platform.

Hongqi HS7 wraps by generation

Swipe sideways. Tap a card for the full description.

Hongqi HS7, first generation, factory photo
Factory color shown

2019–now Hongqi HS7 SUV (first generation)

2019–nowSUV (5 doors)198.2 in (5,035 mm)

The first generation Hongqi HS7, built from 2019 to now, has a tall body that affects the wrap. Its height of 70.0 in (1,778 mm) means the roof is wrapped from a platform and takes more time. The installer must reach the center of the roof safely without leaning on the paint. This adds labor compared to a lower SUV.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.0 in (1,778 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Hongqi HS7

A partial wrap on the Hongqi HS7 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs are good options when a full wrap is not needed.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hongqi HS7: body, cut-outs and film

A Hongqi HS7 vinyl wrap has to cover a long SUV body of 198.2 in (5,035 mm). The five-door body style means the wrap includes four passenger doors and a large tailgate. The tall roof, at 70.0 in (1,778 mm) body height, adds surface area and requires extra film. Installers plan the wrap in sections to handle the large panels and deep recesses.

Hongqi HS7 wrap ideas often start with the tailgate, where the rear glass is set into the panel. The film ends at the edge of the glass, so the installer trims carefully around the window. Door handles, badges, and trim pieces come off for a clean edge. The roof is wrapped from a platform because of the tall body.

How much vinyl to wrap a Hongqi HS7 depends on the film type and the body size. A color change wrap needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 85 ft (26 m) because of pattern matching and extra waste. Counting film for this SUV means measuring the long roof, tall sides, and large tailgate.

Questions about wrapping a Hongqi HS7

How much vinyl does it take to wrap a Hongqi HS7?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Hongqi HS7. This figure covers the first generation SUV body. For chrome or patterned film, the amount is about 85 ft (26 m).

Can I wrap only the hood or the roof of a Hongqi HS7?

Yes, you can wrap only the hood or the roof of a Hongqi HS7. A partial wrap can include the roof, hood, or mirror caps. These single-panel jobs use less film than a full wrap.

Is a Hongqi HS7 hard to wrap?

A Hongqi HS7 is not especially hard to wrap, but some parts add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The tall body means the roof is wrapped from a platform, which takes more time.

How many generations of the Hongqi HS7 does this page cover?

This page covers one generation of the Hongqi HS7, the first generation from 2019 to now.