A Freelander wrapped in black starts with the finish, because matte, satin and gloss black each read differently on the tall body. Satin sits between matte and gloss: it takes the edge off reflections without flattening the color. Then you choose the film itself, as each brand has its own depth of black. A color change of this size uses about 61 ft (18.5 m) of film on the second generation.

Factory paint must be clean and smooth before film goes on, because wrap film follows every chip and scratch. Seams are planned where the body already has a line: door edges, bumper cut lines and the tailgate glass edge. On the second generation the tailgate film ends at the edge of the rear glass. On some trims the roof film is cut around the sunroof opening.

The film is removable by a wrap installer, so the original paint stays underneath. Hand wash the wrapped Freelander with a soft mitt and a mild car shampoo. Avoid automated brushes and pressure washing close to film edges.