Wraps by car

Lexus LFA wrap

The Lexus LFA is a limited-production sports car built from 2010 to 2012. This page covers the first and only generation of the model. A full vinyl wrap of the coupe body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Lexus LFA, first generation, factory photo
Lexus LFA, first generation. Factory color shown.

Lexus LFA wrap colors and ideas

  • Lexus LFA black wrap
  • Lexus LFA white wrap
  • Lexus LFA gray wrap
  • Lexus LFA silver wrap
  • Lexus LFA red wrap
  • Lexus LFA blue wrap
  • Lexus LFA green wrap
  • Lexus LFA yellow wrap
  • Lexus LFA orange wrap
  • Lexus LFA purple wrap
  • Lexus LFA pink wrap
  • Lexus LFA teal wrap
  • Lexus LFA brown wrap
  • Lexus LFA gold wrap
  • Lexus LFA chrome wrap
  • Lexus LFA color shift wrap
  • Lexus LFA carbon fiber wrap
  • Lexus LFA camo and patterned wrap

How much vinyl to wrap a Lexus LFA

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2012coupe (2 doors)177.4 in (4,505 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Lexus LFA wrap cost factors

Lexus LFA wrap cost depends on the film material and the amount of labor. A full wrap of this coupe uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 7 ft (2 m) and more time for alignment.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Lexus LFA wraps by generation

Swipe sideways. Tap a card for the full description.

Lexus LFA, first generation, factory photo
Factory color shown

2010–2012 Lexus LFA coupe (first generation)

2010–2012coupe (2 doors)177.4 in (4,505 mm)

The first generation Lexus LFA was produced from 2010 to 2012. On a car of these years, panels may be original or repainted. A test spot is done before a full wrap to check paint adhesion.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Lexus LFA

A partial wrap on a Lexus LFA can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lexus LFA: body, cut-outs and film

A Lexus LFA vinyl wrap covers a two-door coupe with a length of 177.4 in (4,505 mm). The long side doors require one large piece of film each. The body has no separate trunk lid, so the rear deck and roof flow into one continuous area.

Lexus LFA wrap ideas start with the two long side doors. Each door is wrapped as one large piece of film with no seams. The door handles and mirror caps are removed before the film is applied.

How much vinyl to wrap a Lexus LFA depends on the film you choose. A solid color cast film needs about 49 ft (15 m) of 60-inch (1.52 m) material. Chrome or patterned film requires about 56 ft (17 m) because the pattern must be matched.

Questions about wrapping a Lexus LFA

How much vinyl does it take to wrap a Lexus LFA?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Lexus LFA. For chrome or patterned film, the amount is about 56 ft (17 m).

Can I wrap only the hood or the roof of a Lexus LFA?

Yes, you can wrap only the hood or the roof of a Lexus LFA. A partial wrap on this car can also cover the mirror caps. Chrome delete on the window trim and badges is another smaller job.

Is a Lexus LFA hard to wrap?

Yes, a Lexus LFA is hard to wrap because of its two long side doors. Each door is one large piece of film that must be installed without seams. The car's length of 177.4 in (4,505 mm) adds to the time and skill needed.

How many generations of the Lexus LFA does this page cover?

This page covers one generation of the Lexus LFA. The model was produced from 2010 to 2012 as a coupe.