A Lexus LM wrap cost depends on the generation, the film type, and the amount of disassembly. The second generation needs about 64 ft (19.5 m) of cast film, while the first generation needs about 76 ft (23 m), so film quantity is different. Chrome or patterned film raises the material needed to about 74 ft (22.5 m) for the newer body and about 85 ft (26 m) for the older one. Extra work like removing roof rails or cutting around cameras and fog lamps also affects the final cost.

2023–now Lexus LM van (second generation)
The sliding side doors of the Lexus LM have tracks that stay bare, and these tracks decide where the film is cut. On the second generation the doors are large and flat, but the film edge must stop cleanly at the track line. You cannot wrap over the track because that would block the door movement. The cut line is made slightly inside the track edge so the film never lifts.
Sliding side doors: the door tracks stay bare, and the film is cut along them.
Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
Every trim has cameras in the body: the film is cut around each lens.
Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.
Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
