Wraps by car

Lexus UX wrap

The Lexus UX wrap page covers the first generation SUV built from 2018 to now. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 69 ft (21 m) because extra material is needed to match the design.

1generations18.5 mof film for a full wrap

Lexus UX, first generation, factory photo
Lexus UX, first generation. Factory color shown.

Lexus UX wrap colors and ideas

  • Lexus UX black wrap
  • Lexus UX white wrap
  • Lexus UX gray wrap
  • Lexus UX silver wrap
  • Lexus UX red wrap
  • Lexus UX blue wrap
  • Lexus UX green wrap
  • Lexus UX yellow wrap
  • Lexus UX orange wrap
  • Lexus UX purple wrap
  • Lexus UX pink wrap
  • Lexus UX teal wrap
  • Lexus UX brown wrap
  • Lexus UX gold wrap
  • Lexus UX chrome wrap
  • Lexus UX color shift wrap
  • Lexus UX carbon fiber wrap
  • Lexus UX camo and patterned wrap

How much vinyl to wrap a Lexus UX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)177.0 in (4,495 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Lexus UX wrap cost factors

The Lexus UX wrap cost depends mainly on the film type and the amount of prep work on this 177.0 in (4,495 mm) long SUV. A full color change uses about 61 ft (18.5 m) of film, while chrome or patterned film takes about 69 ft (21 m). Cut-outs for parking sensors, cameras and fog lamps add labor on some trims, as does removing roof rails before the roof is wrapped.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Lexus UX wraps by generation

Swipe sideways. Tap a card for the full description.

Lexus UX, first generation, factory photo
Factory color shown

2018–now Lexus UX SUV (first generation)

2018–nowSUV (5 doors)177.0 in (4,495 mm)

The glass roof on some trims of the Lexus UX is not wrapped, so the roof stays dark whatever the color of the film. Because the panoramic glass panel is left bare, the film ends at the roof rails on those cars. This means a partial roof wrap job on a glass roof model is really a wrap around the glass, not over it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Lexus UX

For a Lexus UX chrome delete, the window trim and badges are covered with black film, and the job is a smaller, faster option than a full wrap. A partial wrap can cover the hood, mirror caps or roof on cars without the glass panel. Paint protection film (PPF) on the front end is a clear layer that guards against stone chips without changing the color.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lexus UX: body, cut-outs and film

The Lexus UX vinyl wrap covers a five-door SUV that measures 177.0 in (4,495 mm) long. The compact length keeps the roof and hood pieces small enough to handle with standard 60-inch film. One roll width is enough for the full roof without seams, while the bumper pieces still need stretch and heat to follow the curves.

Lexus UX wrap ideas start with the real cut-outs and removed parts on this body. A tailgate with the rear glass in it means the film ends at the edge of the glass, so a color change keeps the glass visible. Some trims have a panoramic glass roof, and that glass is not wrapped, so the roof film ends at the roof rails. Some trims have parking sensors, and the film is cut around each sensor, while cameras and fog lamps also need their own openings.

How much vinyl to wrap a Lexus UX stays the same between the generations because the catalog lists one generation only. The first generation runs from 2018 to now, so a single film estimate works for every year of this body. The full wrap takes about 61 ft (18.5 m) of cast film, and chrome or patterned film takes about 69 ft (21 m).

Questions about wrapping a Lexus UX

How much vinyl does it take to wrap a Lexus UX?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Lexus UX. If you use chrome or patterned film, plan for about 69 ft (21 m) because the pattern needs extra material to line up.

Can the roof of a Lexus UX be wrapped?

Yes, the roof of a Lexus UX can be wrapped, but only on cars without the panoramic glass roof. The glass panel itself is not wrapped, so the film ends at the roof rails on those trims.

Can I wrap only the hood or the roof of a Lexus UX?

Yes, you can wrap only the hood or the roof of a Lexus UX. A partial wrap job can cover the hood, mirror caps or roof on cars without the glass panel, and a chrome delete covers only the window trim and badges.

Is a Lexus UX hard to wrap?

No, a Lexus UX is not hard to wrap, but it has several details that add work. The tailgate with the rear glass in it means the film ends at the glass edge, and some trims have cut-outs for parking sensors, cameras and fog lamps. Roof rails also need to come off before the roof is wrapped on those trims.