Wraps by car

Lexus RZ wrap

The Lexus RZ wrap page covers the first generation of the electric SUV, produced from 2022 to the present. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 62 ft (19 m). The RZ is the only generation in this catalog.

1generations17 mof film for a full wrap

Lexus RZ, first generation, factory photo
Lexus RZ, first generation. Factory color shown.

Lexus RZ wrap colors and ideas

  • Lexus RZ black wrap
  • Lexus RZ white wrap
  • Lexus RZ gray wrap
  • Lexus RZ silver wrap
  • Lexus RZ red wrap
  • Lexus RZ blue wrap
  • Lexus RZ green wrap
  • Lexus RZ yellow wrap
  • Lexus RZ orange wrap
  • Lexus RZ purple wrap
  • Lexus RZ pink wrap
  • Lexus RZ teal wrap
  • Lexus RZ brown wrap
  • Lexus RZ gold wrap
  • Lexus RZ chrome wrap
  • Lexus RZ color shift wrap
  • Lexus RZ carbon fiber wrap
  • Lexus RZ camo and patterned wrap

How much vinyl to wrap a Lexus RZ

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)189.2 in (4,805 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Lexus RZ wrap cost factors

Lexus RZ wrap cost depends on the film type, the size of the SUV, and the amount of disassembly. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, and chrome or patterned film uses about 62 ft (19 m). The panoramic glass roof means less film is used on the roof, but the charge port door and camera cut-outs add labor. The long body of 189.2 in (4,805 mm) and the tailgate with glass require careful fitting.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Lexus RZ wraps by generation

Swipe sideways. Tap a card for the full description.

Lexus RZ, first generation, factory photo
Factory color shown

2022–now Lexus RZ SUV (first generation)

2022–nowSUV (5 doors)189.2 in (4,805 mm)

The first generation Lexus RZ has a panoramic glass roof on every trim, and the roof is not wrapped. The film ends at the roof rails, so the glass keeps its dark look regardless of the wrap color. This is a key fact for anyone planning a color change wrap or chrome delete. The glass roof also reduces the amount of film needed for the roof area.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Lexus RZ

A partial wrap on a Lexus RZ can cover the hood, mirror caps, and tailgate without wrapping the whole SUV. A chrome delete covers the window trim and badges with black film, leaving the body color unchanged. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done on any year of the RZ.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lexus RZ: body, cut-outs and film

A Lexus RZ vinyl wrap covers a large five-door SUV body that is 189.2 in (4,805 mm) long. The tall sides and long roof line mean the installer works with wide sheets and plans seams at panel edges. The tailgate includes the rear glass, so the film ends at the edge of the glass. The body has no sharp creases that make wrapping harder.

Lexus RZ wrap ideas start with the parts that need cut-outs or come off the body. Every trim has a panoramic glass roof, so the vinyl stops at the roof rails and the glass stays unwrapped. The electric car's charge port door is wrapped as a small separate piece. Cameras in the body require the film to be cut around each lens.

How much vinyl to wrap a Lexus RZ depends on the body style, and the RZ has only one body style for its single generation. The 2025 restyling kept the same outer dimensions, so film estimates do not change between earlier and later cars. Installers count the same 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. The glass roof is not wrapped, so the roof area that gets film is smaller than on a metal-roof SUV.

Questions about wrapping a Lexus RZ

How much vinyl does it take to wrap a Lexus RZ?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Lexus RZ. If you choose chrome or patterned film, you need about 62 ft (19 m). These figures are for the newest body, which is the only generation of the RZ. The estimate includes the tailgate, doors, fenders, bumpers, and rocker panels, but not the glass roof.

Can the roof of a Lexus RZ be wrapped?

No, the roof of a Lexus RZ cannot be wrapped because every trim has a panoramic glass roof. The vinyl film is applied only to the metal panels around the glass, ending at the roof rails. The glass roof itself stays as it is, so the top of the car remains dark regardless of the wrap color. If you want a different look on the roof, you would need to consider other modifications.

Which years of the Lexus RZ take the same film cuts?

All years of the Lexus RZ take the same film cuts because there is only one generation, produced from 2022 to the present. The 2025 restyling changed some details but did not alter the body shape or dimensions, so film patterns remain the same. Even with the restyling, installers use the same templates for the doors, fenders, and tailgate. There are no separate versions for different production years.

Can I wrap only the hood or the roof of a Lexus RZ?

Yes, you can wrap only the hood or the roof of a Lexus RZ, but the roof cannot be wrapped because it is glass. A partial wrap can include the hood, mirror caps, and tailgate, leaving the rest of the SUV unwrapped. Paint protection film (PPF) can be applied to the front end only, such as the hood and bumper. A chrome delete covers the window trim and badges with black film.