Wraps by car

Saturn Astra wrap

This page covers the Saturn Astra wrap, a vinyl wrap job on the compact hatchback sold in the 2008–2009 production years. Saturn offered one generation of the Astra in North America, with three-door and five-door hatchback body styles. A full color change wrap on the newest Astra body uses about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl film.

1generations15 mof film for a full wrap

Saturn Astra, first generation, factory photo
Saturn Astra, first generation. Factory color shown.

Saturn Astra wrap colors and ideas

  • Astra black wrap
  • Astra white wrap
  • Astra gray wrap
  • Astra silver wrap
  • Astra red wrap
  • Astra blue wrap
  • Astra green wrap
  • Astra yellow wrap
  • Astra orange wrap
  • Astra purple wrap
  • Astra pink wrap
  • Astra teal wrap
  • Astra brown wrap
  • Astra gold wrap
  • Astra chrome wrap
  • Astra color shift wrap
  • Astra carbon fiber wrap
  • Astra camo and patterned wrap

How much vinyl to wrap a Saturn Astra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2009hatchback (3 or 5 doors)167.3 in (4,249 mm) to 168.9 in (4,290 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Astra wrap cost factors

Astra wrap cost depends on the size of the job, the film chosen and the condition of the paint. A full wrap of this compact hatchback needs about 49 ft (15 m) of cast film, but a chrome or patterned film takes about 61 ft (18.5 m) and adds more labor for alignment. The cost also changes if the car has paint damage, rust or deep scratches that need repair before the vinyl is applied. The one generation of the Astra has a simple shape, so the labor time is lower than on a car with many complex curves.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Astra wraps by generation

Swipe sideways. Tap a card for the full description.

Saturn Astra, first generation, factory photo
Factory color shown

2008–2009 Astra hatchback (first generation)

2008–2009hatchback (3 or 5 doors)167.3 in (4,249 mm) to 168.9 in (4,290 mm)

The first generation Saturn Astra, sold in 2008–2009, often has paint that is original or has been repainted on some panels. An installer does a test spot on each panel before a full wrap, because aged paint or a respray can lift when the film is repositioned. The hatchback body has no major revisions in this generation, so the same film estimate applies to the three-door and five-door styles. The rear glass in the tailgate is the main area to plan for, as the film must end neatly at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Astra

A partial wrap on a Saturn Astra can be the roof, the hood or the mirror caps, and it is a way to change the look without wrapping the whole car. An Astra chrome delete covers the window trim and badges with black film, and it makes the bright trim disappear. Paint protection film (PPF) on the front end is a clear film that protects the bumper, hood and mirror caps from stone chips. These smaller jobs use less film than a full wrap and can be matched to the car's original color or a contrast color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saturn Astra: body, cut-outs and film

The Saturn Astra vinyl wrap has to follow the shape of a compact hatchback that is 167.3 in (4,249 mm) to 168.9 in (4,290 mm) long. The three-door version has longer doors and larger rear side panels than the five-door, but both styles have similar flat roof and hood areas. A wrap installer can cover the main panels of this car with standard-width film without extra seams. The small overhangs and simple bumper shapes keep the amount of trimming work moderate.

Astra wrap ideas start with the biggest detail on the body: the tailgate has the rear glass in it, so the film must end at the edge of the glass. The door handles, mirror caps, antenna base and badges come off before the vinyl is laid down. The side moldings and the trim around the windows can stay in place if they are in good condition, but a wrap installer may remove them to tuck the film edges. The front bumper has fog light openings on some trims, so those trims need extra cut-outs.

How much vinyl to wrap an Astra is a question that depends on the film type and the wrap style. A full color change with cast film takes about 49 ft (15 m) of 60-inch (1.52 m) material, while a chrome or patterned film takes about 61 ft (18.5 m) because the pattern must be matched. The one generation of the Astra in this catalog has no major body size changes between the 2008 and 2009 production years. A partial wrap such as a roof or hood uses less film, and an installer measures the exact panel before ordering.

Questions about wrapping a Saturn Astra

How much vinyl does it take to wrap a Saturn Astra?

A Saturn Astra full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a color change. If you choose a chrome or patterned film, the amount goes up to about 61 ft (18.5 m) because the pattern must be matched on every panel. These figures are for the newest five-door body, and the three-door body is similar in surface area. A partial wrap such as a roof or hood uses less film, and an installer measures the exact panel before ordering.

Can I wrap only the hood or the roof of an Astra?

Yes, you can wrap only the hood or the roof of a Saturn Astra, and these are common partial wrap jobs. The roof is a flat panel that takes one piece of film, and the hood is a simple shape with no deep recesses. Mirror caps are also easy to wrap, and they can be done in a contrast color. A partial wrap uses less film and less labor than a full wrap, and it can later be removed or changed.

Is an Astra hard to wrap?

The Saturn Astra is not hard to wrap, but the tailgate with the rear glass in it adds work because the film must end at the edge of the glass. A compact hatchback this size, at 167.3 in (4,249 mm) to 168.9 in (4,290 mm) long, has large flat panels that are quick to cover. The door handles, mirror caps and badges come off to make the wrap look clean, and that takes some time. An installer with hatchback experience can wrap this car without special problems.

How many generations of the Astra does this page cover?

This page covers one generation of the Saturn Astra, the first generation sold in 2008–2009. Saturn brought the Astra to North America for those production years only, and it did not sell a second generation. The body styles in this generation are a three-door and a five-door hatchback. A full wrap of the newest five-door body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film.