Wraps by car

Saturn Aura wrap

The Saturn Aura wrap page covers the full-size Saturn Aura sedan, produced in one generation from 2006 to 2010. A complete vinyl wrap of this first-generation body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, a full wrap needs about 69 ft (21 m).

1generations18 mof film for a full wrap

Saturn Aura, first generation, factory photo
Saturn Aura, first generation. Factory color shown.

Saturn Aura wrap colors and ideas

  • Aura black wrap
  • Aura white wrap
  • Aura gray wrap
  • Aura silver wrap
  • Aura red wrap
  • Aura blue wrap
  • Aura green wrap
  • Aura yellow wrap
  • Aura orange wrap
  • Aura purple wrap
  • Aura pink wrap
  • Aura teal wrap
  • Aura brown wrap
  • Aura gold wrap
  • Aura chrome wrap
  • Aura color shift wrap
  • Aura carbon fiber wrap
  • Aura camo and patterned wrap

How much vinyl to wrap a Saturn Aura

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010sedan (4 doors)191.0 in (4,851 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Aura wrap cost factors

Aura wrap cost depends on the size of the full-size sedan, which is 191.0 in (4,851 mm) long and takes about 59 ft (18 m) of film. Film choice changes the amount needed to 69 ft (21 m) for chrome or patterned vinyl. Surface preparation, removing parts like bumpers and badges, and the condition of the paint also affect the final cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Aura wraps by generation

Swipe sideways. Tap a card for the full description.

Saturn Aura, first generation, factory photo
Factory color shown

2006–2010 Aura sedan (first generation)

2006–2010sedan (4 doors)191.0 in (4,851 mm)

The first generation Saturn Aura spans 2006–2010 and is the only generation this page covers. Paint age on a car of these years means panels may be original or repainted, so an installer does a test spot before a full wrap. Adhesion varies on older paint, and a test spot shows whether primer or extra prep is needed.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Aura

A partial wrap on an Aura covers the roof, hood or mirror caps as separate vinyl jobs. An Aura chrome delete covers the window trim and badges with black film. Paint protection film is available as clear film on the front end of the sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saturn Aura: body, cut-outs and film

A Saturn Aura vinyl wrap covers a four-door sedan with a length of 191.0 in (4,851 mm). The full-size body has long roof and quarter panels, which add surface area but no complex curves. The simple sedan shape means installers can wrap most panels with single pieces of film.

Aura wrap ideas start with the door handles, mirrors and antenna, which need cut-outs or removal before film is applied. The front and rear bumpers come off for a clean wrap around the edges, and the door trim is removed so film tucks behind it. The badges on the trunk and fenders are also taken off for a smooth finish.

How much vinyl to wrap an Aura depends on the one generation sold from 2006 to 2010. The body did not change size between these years, so the film estimate of 59 ft (18 m) covers every production year. Installers still measure each car before cutting, because repairs or aftermarket parts can change panel dimensions.

Questions about wrapping a Saturn Aura

How much vinyl does it take to wrap a Saturn Aura?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Saturn Aura. That figure is for a full wrap of the newest body, and chrome or patterned film raises the amount to about 69 ft (21 m).

Can I wrap only the hood or the roof of an Aura?

Yes, you can wrap only the hood or the roof of an Aura as a partial wrap job. Mirror caps are another common partial wrap area, and a chrome delete covers the window trim and badges separately.

Is an Aura hard to wrap?

The Aura is a moderately sized sedan that adds work mainly because of its length of 191.0 in (4,851 mm). The full-size body means more film and more time on the long roof and quarter panels, but the simple sedan shape has no deep recesses. Bumpers and badges still need removal for a clean wrap.

How many generations of the Aura does this page cover?

This page covers one generation of the Saturn Aura, produced from 2006 to 2010. The single-generation body means film estimates on this page apply to every year of the model.