Wraps by car

Saturn SL wrap

The Saturn SL wrap page covers the first and second generations of the Saturn SL compact sedan. A full color change wrap on the newest body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl wrap. The first generation needs slightly less film because the car is 1.8 inches shorter.

2generations15.5 mof film for a full wrap

Saturn SL, second generation, factory photo
Saturn SL, second generation. Factory color shown.

Saturn SL wrap colors and ideas

  • Saturn SL black wrap
  • Saturn SL white wrap
  • Saturn SL gray wrap
  • Saturn SL silver wrap
  • Saturn SL red wrap
  • Saturn SL blue wrap
  • Saturn SL green wrap
  • Saturn SL yellow wrap
  • Saturn SL orange wrap
  • Saturn SL purple wrap
  • Saturn SL pink wrap
  • Saturn SL teal wrap
  • Saturn SL brown wrap
  • Saturn SL gold wrap
  • Saturn SL chrome wrap
  • Saturn SL color shift wrap
  • Saturn SL carbon fiber wrap
  • Saturn SL camo and patterned wrap

How much vinyl to wrap a Saturn SL

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2002sedan (4 doors)178.1 in (4,524 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1990–1995sedan (4 doors)176.3 in (4,478 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Saturn SL wrap cost factors

The Saturn SL wrap cost depends on the size of the car, the chosen film, and the amount of disassembly. The newest body is 178.1 in (4,524 mm) long, so it needs about 51 ft (15.5 m) of 60-inch film. A chrome or patterned film raises the amount to about 62 ft (19 m). The installer's labor also changes with the condition of the paint and the number of parts removed.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Saturn SL wraps by generation

Swipe sideways. Tap a card for the full description.

Saturn SL, second generation, factory photo
Factory color shown

1996–2002 Saturn SL sedan (second generation)

1996–2002sedan (4 doors)178.1 in (4,524 mm)

The second generation Saturn SL from 1996–2002 is a compact sedan with a painted finish that may be original or repainted after years of use. Before a full wrap, the installer should apply a test spot to check how the film adheres to the paint. Panels that were repainted with low-quality paint can lift when the film is repositioned. A test spot shows whether the surface is stable enough for a wrap.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Saturn SL, first generation, factory photo
Factory color shown

1990–1995 Saturn SL sedan (first generation)

1990–1995sedan (4 doors)176.3 in (4,478 mm)

The first generation Saturn SL from 1990–1995 is 176.3 in (4,478 mm) long, so a full wrap needs about 49 ft (15 m) of 60-inch cast film. The four-door sedan body has flat sides and a simple roof, which means fewer panels need stretching. The bumpers are large single pieces, so each one needs one person to hold the film while another applies heat. The trunk and hood are separate panels that are easy to cover without seams.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Saturn SL

A partial wrap on a Saturn SL can cover just the roof, hood, or mirror caps with a contrasting film. A chrome delete covers the window trim and badges with black film to change the bright metal look. Paint protection film (PPF) is a clear film applied to the front end to protect the hood, bumper, and mirrors from stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saturn SL: body, cut-outs and film

The Saturn SL vinyl wrap is a straightforward job because the car is a compact four-door sedan with no complex curves. The newest body measures 178.1 in (4,524 mm) long, and the first generation is 176.3 in (4,478 mm) long. The roof, hood, and flat door panels are easy to cover with standard cast film. The bumpers and mirror caps need more time because installers must stretch the film around corners.

Saturn SL wrap ideas include a full color change, chrome delete, and paint protection film (PPF). The door handles, antenna, and side mirrors come off before the film is applied. Installers also remove the badges and window trim for a clean edge. The roof and hood have no cut-outs, but the door handles and fuel filler door need precise trimming.

How much vinyl to wrap a Saturn SL depends on which generation you own. The second generation from 1996–2002 needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation from 1990–1995 needs about 49 ft (15 m) because the body is shorter. Chrome or patterned film adds about 11 ft (3.4 m) to each estimate for pattern matching.

Questions about wrapping a Saturn SL

How much vinyl does it take to wrap a Saturn SL?

A full wrap on a Saturn SL needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the newest body. The first generation from 1990–1995 needs about 49 ft (15 m) because it is shorter. These numbers come from the official film estimate for the sedan body. Chrome or patterned film needs about 62 ft (19 m).

Can I wrap only the hood or the roof of a Saturn SL?

Yes, you can wrap only the hood or the roof of a Saturn SL. A partial wrap for the roof, hood, or mirror caps is a common way to change the look without covering the whole car. The flat panels on the Saturn SL make these small jobs quick and clean.

Is a Saturn SL hard to wrap?

A Saturn SL is not hard to wrap because the sedan body has flat, simple panels. The bumpers and mirror caps add work because the film must stretch around curves. The car's size, 178.1 in (4,524 mm) for the newest generation, means more film and more seams than a smaller car. Removing the door handles and trim also adds time.

How many generations of the Saturn SL does this page cover?

This page covers two generations of the Saturn SL. The first generation is from 1990–1995 and the second generation is from 1996–2002. Both are four-door sedans, but the second generation is slightly longer.