Wraps by car

Saturn ION wrap

A Saturn ION wrap covers the mid-size first generation built from 2003 to 2007. Vinyl wrap for this car comes as a full color change or as partial coverage on selected panels. The newest body of the Saturn ION is the 2007 coupe or sedan, and a complete wrap takes about 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) film.

1generations15.5 mof film for a full wrap

Saturn ION, first generation, factory photo
Saturn ION, first generation. Factory color shown.

Saturn ION wrap colors and ideas

  • Saturn ION black wrap
  • Saturn ION white wrap
  • Saturn ION gray wrap
  • Saturn ION silver wrap
  • Saturn ION red wrap
  • Saturn ION blue wrap
  • Saturn ION green wrap
  • Saturn ION yellow wrap
  • Saturn ION orange wrap
  • Saturn ION purple wrap
  • Saturn ION pink wrap
  • Saturn ION teal wrap
  • Saturn ION brown wrap
  • Saturn ION gold wrap
  • Saturn ION chrome wrap
  • Saturn ION color shift wrap
  • Saturn ION carbon fiber wrap
  • Saturn ION camo and patterned wrap

How much vinyl to wrap a Saturn ION

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2007coupe, sedan (2 or 4 doors)184.5 in (4,686 mm) to 185.0 in (4,699 mm)about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Saturn ION wrap cost factors

A Saturn ION wrap cost depends on the body style, the film type, and the amount of disassembly needed. The sedan needs about 6 ft (1.8 m) more film than the coupe, and chrome or patterned film adds about 9 ft (2.7 m) over standard color film. The plastic panels on the ION require careful prep, and the number of cut-outs adds labor time. A full wrap on the 2003–2007 Saturn ION will fall in the mid-size car range for material and hours.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: coupe, sedan (2 or 4 doors).

Saturn ION wraps by generation

Swipe sideways. Tap a card for the full description.

Saturn ION, first generation, factory photo
Factory color shown

2003–2007 Saturn ION coupe, sedan (first generation)

2003–2007coupe, sedan (2 or 4 doors)184.5 in (4,686 mm) to 185.0 in (4,699 mm)

The first generation Saturn ION, produced from 2003 to 2007, comes in a coupe or a sedan. The style decides the panel plan and the film amount needed for a wrap. The coupe is shorter at the rear with a faster roofline, while the sedan has a conventional trunk and four doors. Both bodies are mid-size and within an inch of each other in overall length, so the wrap area is close but not identical.

Film: about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Saturn ION

Partial wrap on a Saturn ION can cover the roof, hood, or mirror caps as a smaller change. Saturn ION chrome delete covers the window trim and badges with black film instead of bright metal. Paint protection film (PPF) is a clear option that goes on the front end to guard against rock chips. These jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saturn ION: body, cut-outs and film

A Saturn ION vinyl wrap has to follow the two distinct body styles of this generation. The coupe and the sedan share the same mid-size platform but differ in door count and panel shapes. The length runs from 184.5 in (4,686 mm) to 185.0 in (4,699 mm), so the wrap area is nearly the same on both. The main difference in film amount is between the coupe and the sedan, with the sedan using more material for its extra doors and roof section.

Saturn ION wrap ideas should account for the plastic body panels that Saturn used on this model. The door handles, mirrors, and antenna need cut-outs or removal for a clean install. The front and rear bumpers are large one-piece moldings that take extra time to tuck and trim. The side moldings and badges can be removed, but the adhesive residue needs cleaning before the film goes on.

When you figure how much vinyl to wrap a Saturn ION, there is only one generation to consider. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 57 ft (17.5 m). A chrome or patterned film can push the total up to about 66 ft (20 m) because of pattern matching and waste. The size difference between the two bodies is small, but the sedan always uses more film because of the rear doors.

Questions about wrapping a Saturn ION

How much vinyl does it take to wrap a Saturn ION?

A Saturn ION takes about 51 ft (15.5 m) of vinyl for the coupe or about 57 ft (17.5 m) for the sedan when using 60-inch (1.52 m) cast film. These figures are for a full color change wrap on the 2003–2007 mid-size body. Chrome or patterned film can require up to about 66 ft (20 m) because of waste and matching.

Which Saturn ION body takes more film?

The sedan of the Saturn ION takes more film than the coupe. The sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) film, while the coupe needs about 51 ft (15.5 m). The extra 6 ft (1.8 m) covers the rear doors and the larger roof area.

Can I wrap only the hood or the roof of a Saturn ION?

Yes, a Saturn ION hood or roof can be wrapped as a partial job. Partial wrap options for this car include the roof, hood, and mirror caps, either as a color change or with a different finish. The hood is a single panel on the ION with a simple shape, and the roof is a continuous surface from windshield to rear glass.

Is a Saturn ION hard to wrap?

A Saturn ION adds some work because of its plastic body panels and the need for exact cut-outs around moldings. The coupe and sedan are mid-size, but the flexible panels need careful prep so the film sticks. The mirrors, door handles, and antenna need removal or trimming, and the large bumpers take time to tuck. It is not the hardest car to wrap, but the installer has to handle the panel seams and the plastic texture.