Wraps by car

Saturn LW wrap

The Saturn LW wrap page covers the mid-size wagon built from 1998 to 2004 in one generation. A full vinyl wrap of this car takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The page gives the body styles, the parts that need extra work, and the film amounts for a complete color change.

1generations17.5 mof film for a full wrap

Saturn LW, first generation, factory photo
Saturn LW, first generation. Factory color shown.

Saturn LW wrap colors and ideas

  • Saturn LW black wrap
  • Saturn LW white wrap
  • Saturn LW gray wrap
  • Saturn LW silver wrap
  • Saturn LW red wrap
  • Saturn LW blue wrap
  • Saturn LW green wrap
  • Saturn LW yellow wrap
  • Saturn LW orange wrap
  • Saturn LW purple wrap
  • Saturn LW pink wrap
  • Saturn LW teal wrap
  • Saturn LW brown wrap
  • Saturn LW gold wrap
  • Saturn LW chrome wrap
  • Saturn LW color shift wrap
  • Saturn LW carbon fiber wrap
  • Saturn LW camo and patterned wrap

How much vinyl to wrap a Saturn LW

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2004wagon (5 doors)190.4 in (4,835 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Saturn LW wrap cost factors

Saturn LW wrap cost depends on the size of the car, the film grade, and how much disassembly the shop does. A 190.4 in (4,835 mm) wagon needs more material than a small car. Cutting around the tailgate glass and removing the mirrors and handles adds labor time. The film amount is about 57 ft (17.5 m) for a standard color change, but chrome or patterned film takes about 74 ft (22.5 m), which raises the material cost.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Saturn LW wraps by generation

Swipe sideways. Tap a card for the full description.

Saturn LW, first generation, factory photo
Factory color shown

1998–2004 Saturn LW wagon (first generation)

1998–2004wagon (5 doors)190.4 in (4,835 mm)

The first generation Saturn LW was made from 1998 to 2004, and paint age is a key point before a wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer will check paint adhesion on a small area to see that the vinyl will not pull the paint. This step matters because a wrap on failing paint can lift the paint when the film is removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Saturn LW

For a smaller job than a full wrap, a partial wrap of the roof, hood, or mirror caps is an option on the Saturn LW. A chrome delete can cover the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear film. These partial jobs use less film than the full 57 ft (17.5 m) and can be done on the car without wrapping the tailgate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saturn LW: body, cut-outs and film

A Saturn LW vinyl wrap covers a single body style: a five-door wagon that is 190.4 in (4,835 mm) long. The tall roof and large sides of a wagon make the total film area larger than on a sedan of the same class. The tailgate adds a wide, flat panel that has glass set into the metal. This body shape has no separate trunk lid to wrap, so the tailgate is wrapped as one piece up to the glass edge.

Saturn LW wrap ideas start with the tailgate, where the film ends at the edge of the rear glass because the glass is in the tailgate. The door handles, side mirrors, and roof rails may need to be removed or masked for a clean wrap without cut lines. The front and rear bumpers have recesses and grille openings that call for relief cuts. The roof has antenna bases that need to be dropped or wrapped around.

To know how much vinyl to wrap a Saturn LW, you can plan from one generation because the car changed little from 1998 to 2004. The wagon body stayed the same length and shape, so the same amount of film works for all years. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, you will need about 74 ft (22.5 m) because of pattern matching.

Questions about wrapping a Saturn LW

How much vinyl does it take to wrap a Saturn LW?

A full wrap of a Saturn LW takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. This amount is based on the wagon body that was made from 1998 to 2004. If you use chrome or patterned film, the amount goes up to about 74 ft (22.5 m) because the pattern must be matched. The tailgate glass is not wrapped, but the film runs to the edge of the glass.

Can I wrap only the hood or the roof of a Saturn LW?

Yes, you can wrap only the hood or the roof of a Saturn LW. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete can cover the window trim and badges. These jobs take less film than a full wrap and do not require wrapping the tailgate.

Is a Saturn LW hard to wrap?

A Saturn LW is not hard to wrap, but the tailgate with the rear glass in it adds work. The film ends at the edge of the glass, so the installer must make a clean cut along that line. The car is a wagon at 190.4 in (4,835 mm) long, which means large panels and more film to handle. Door handles, mirrors, and roof rails need removal or careful masking for a clean job.

How many generations of the Saturn LW does this page cover?

This page covers one generation of the Saturn LW, made from 1998 to 2004. The car stayed the same body style and length for all years, so the film amounts are the same for any year. A full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.