Wraps by car

Suzuki Baleno wrap

The Suzuki Baleno wrap covers two generations from 1995 to now, and the newest hatchback body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl wrap film.

2generations15.5 mof film for a full wrap

Suzuki Baleno, second generation, factory photo
Suzuki Baleno, second generation. Factory color shown.

Suzuki Baleno wrap colors and ideas

  • Baleno black wrap
  • Baleno white wrap
  • Baleno gray wrap
  • Baleno silver wrap
  • Baleno red wrap
  • Baleno blue wrap
  • Baleno green wrap
  • Baleno yellow wrap
  • Baleno orange wrap
  • Baleno purple wrap
  • Baleno pink wrap
  • Baleno teal wrap
  • Baleno brown wrap
  • Baleno gold wrap
  • Baleno chrome wrap
  • Baleno color shift wrap
  • Baleno carbon fiber wrap
  • Baleno camo and patterned wrap

How much vinyl to wrap a Suzuki Baleno

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowhatchback (5 doors)157.3 in (3,995 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1995–2002hatchback, sedan, wagon (3 or 4 or 5 doors)153.5 in (3,900 mm) to 172.2 in (4,375 mm)about 46 ft (14 m) for the hatchback to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Baleno wrap cost factors

Baleno wrap cost depends on the size of the car, the number of separate pieces, and the film finish you choose. The second generation is 157.3 in (3,995 mm) long and takes about 51 ft (15.5 m) of standard cast film, while a chrome or patterned film needs about 61 ft (18.5 m). A car with a styling kit has more pieces to wrap, which adds labor time to the job.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019, 2022: bumpers and lights differ between the versions, and so do the film cuts.

Baleno wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Baleno, second generation, factory photo
Factory color shown

2016–now Baleno hatchback (second generation)

2016–nowhatchback (5 doors)157.3 in (3,995 mm)

The second generation Baleno was restyled in 2019 and 2022, so bumpers and lights changed and film cut for one version does not fit the other. The basic hatchback shape stayed the same, but the front and rear ends have different contours and openings after each restyling. If you are ordering pre-cut film, match it to the production years of your car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Suzuki Baleno, first generation, factory photo
Factory color shown

1995–2002 Baleno hatchback, sedan, wagon (first generation)

1995–2002hatchback, sedan, wagon (3 or 4 or 5 doors)153.5 in (3,900 mm) to 172.2 in (4,375 mm)

The first generation Baleno from 1995 to 2002 needs a careful look at the paint before a wrap because panels may be original or repainted. A test spot on the paint shows whether the film will stick well and lift cleanly on an older surface. The hatchback, sedan and wagon share the same front end, but the rear panels differ, so film for one body style does not fit another.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the hatchback to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Baleno

A partial wrap on a Baleno can cover the roof, hood or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film for a different look. Clear paint protection film (PPF) on the front end guards the bumper, hood and mirrors from stone chips. These jobs use less film than a full wrap and can be done on any body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Suzuki Baleno: body, cut-outs and film

A Suzuki Baleno vinyl wrap on the five-door hatchback uses one main length of film because the sides are short and the roof is narrow. The body is 157.3 in (3,995 mm) long, so a standard 60-inch (1.52 m) roll gives enough width for the hood, roof and tailgate with little waste. The doors and rear quarter panels are tall for a mini car, which means a full wrap still touches every panel but needs no extra film for the roof pillars.

Baleno wrap ideas start with the tailgate, where the film ends at the edge of the rear glass because the glass is set into the tailgate itself. Some trims have a styling kit on the bumpers and sills, which adds more separate pieces to wrap and more edges to tuck. Every trim has parking sensors in the bumpers, so the film is cut around each sensor to keep them working. Some trims have fog lamps in the front bumper, which need cut-outs in the bumper film.

How much vinyl to wrap a Baleno depends on the generation, with the second generation using about 51 ft (15.5 m) of film and the first generation hatchback using about 46 ft (14 m). The first generation also came as a sedan and a wagon, and the wagon uses up to about 52 ft (16 m) of film because of its longer roof and bigger rear end. A chrome or patterned film on the second generation needs about 61 ft (18.5 m), and on the first generation it can need up to about 67 ft (20.5 m).

Questions about wrapping a Suzuki Baleno

How much vinyl does it take to wrap a Suzuki Baleno?

A Suzuki Baleno needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap of the current hatchback body. The first generation uses less for the hatchback and more for the wagon, and a chrome or patterned film adds about 10 ft (3 m) to the total.

Which years of the Baleno take the same film cuts?

The second generation Baleno from 2016 to now takes the same film cuts except for the restyled versions from 2019 and 2022, which have different bumpers and lights. The first generation from 1995 to 2002 has its own film cuts for the hatchback, sedan and wagon, with no restyling changes between those years.

Can I wrap only the hood or the roof of a Baleno?

Yes, you can wrap only the hood or the roof of a Baleno, and it is a good way to change the look without a full wrap. A roof wrap needs about 10 ft (3 m) of film on the second generation, and a hood wrap needs about 6 ft (1.8 m). Mirror caps are small and can be wrapped with the leftover film from a roof or hood job.

Is a Baleno hard to wrap?

A Baleno is not hard to wrap, but a few areas add work. The tailgate glass is set into the panel, so the film must be cut cleanly around the edge of the glass. Parking sensors in the bumpers need cut-outs on every trim, and some trims have fog lamps or a styling kit with more separate pieces.