Wraps by car

Suzuki Ertiga wrap

The Suzuki Ertiga wrap page covers both generations of this seven-seat minivan. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The first generation is slightly shorter and uses about 62 ft (19 m). The guide below explains the wrap process, film amounts, and options for this car.

2generations19.5 mof film for a full wrap

Suzuki Ertiga, second generation, factory photo
Suzuki Ertiga, second generation. Factory color shown.

Suzuki Ertiga wrap colors and ideas

  • Ertiga black wrap
  • Ertiga white wrap
  • Ertiga gray wrap
  • Ertiga silver wrap
  • Ertiga red wrap
  • Ertiga blue wrap
  • Ertiga green wrap
  • Ertiga yellow wrap
  • Ertiga orange wrap
  • Ertiga purple wrap
  • Ertiga pink wrap
  • Ertiga teal wrap
  • Ertiga brown wrap
  • Ertiga gold wrap
  • Ertiga chrome wrap
  • Ertiga color shift wrap
  • Ertiga carbon fiber wrap
  • Ertiga camo and patterned wrap

How much vinyl to wrap a Suzuki Ertiga

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowvan (5 doors)173.0 in (4,395 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2012–2018van (5 doors)167.9 in (4,265 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Ertiga wrap cost factors

Ertiga wrap cost depends on the size of the vehicle, the film type, and the amount of disassembly. The second generation is 173.0 in (4,395 mm) long and needs about 64 ft (19.5 m) of film. The first generation is 167.9 in (4,265 mm) long and needs about 62 ft (19 m). Chrome or patterned film requires about 76 ft (23 m) or 72 ft (22 m) respectively, which increases material use.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Ertiga wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Ertiga, second generation, factory photo
Factory color shown

2018–now Ertiga van (second generation)

2018–nowvan (5 doors)173.0 in (4,395 mm)

The second-generation Suzuki Ertiga has sliding side doors that affect the wrap. The tracks stay bare, and the film is cut along them so the doors work properly. The installer must take care to align the film with the track edges. This generation is 173.0 in (4,395 mm) long and needs about 64 ft (19.5 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Suzuki Ertiga, first generation, factory photo
Factory color shown

2012–2018 Ertiga van (first generation)

2012–2018van (5 doors)167.9 in (4,265 mm)

The first-generation Suzuki Ertiga may have paint issues due to its age. Panels may be original or repainted, and a test spot should be done before a full wrap. This step checks if the film will adhere well and remove cleanly later. The car is 167.9 in (4,265 mm) long and needs about 62 ft (19 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Ertiga

Partial wrap options for the Suzuki Ertiga include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can change the look without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Suzuki Ertiga: body, cut-outs and film

A Suzuki Ertiga vinyl wrap is a large job because the car is a five-door minivan. The second generation is 173.0 in (4,395 mm) long and the first is 167.9 in (4,265 mm). Both have tall, flat body sides that are straightforward to cover but need long pieces of film. The roof is also sizable and adds to the total film needed.

Ertiga wrap ideas must account for the sliding side doors on both generations. The door tracks stay bare, and the film is cut along them so the doors can slide. The door handles, mirrors, and badges are removed or cut around for a clean finish. A chrome delete can be done on the window trim and badges to change the look.

How much vinyl to wrap an Ertiga depends on the generation and the film type. The second generation needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a color change. The first generation needs about 62 ft (19 m) of the same film. If you choose chrome or patterned film, add about 12 ft (3.5 m) to each estimate.

Questions about wrapping a Suzuki Ertiga

How much vinyl does it take to wrap a Suzuki Ertiga?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film to wrap a Suzuki Ertiga of the second generation. This estimate is for a full color change wrap with standard film. If you use chrome or patterned film, you need about 76 ft (23 m).

Are the sliding doors of an Ertiga wrapped?

Yes, the sliding doors of an Ertiga are wrapped, but the tracks remain bare. The film is cut along the door tracks so the doors can slide freely. This is standard practice for any vehicle with sliding doors.

Can I wrap only the hood or the roof of an Ertiga?

Yes, you can wrap only the hood or the roof of an Ertiga. A partial wrap can cover the roof, hood, or mirror caps. This is a smaller job that uses less film and can be done on its own.

Is an Ertiga hard to wrap?

An Ertiga is moderately hard to wrap because of its size and sliding doors. The vehicle is over 4,000 mm long, so large panels require careful handling. The sliding door tracks add extra cutting and alignment work. However, the flat sides are easier than curved surfaces.