Wraps by car

Suzuki Landy wrap

A Suzuki Landy wrap covers the whole body of this three-generation minivan in vinyl film. The newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the estimate is about 79 ft (24 m). The Landy has been produced since 2007 and remains a large five-door van.

3generations21 mof film for a full wrap

Suzuki Landy, third generation, factory photo
Suzuki Landy, third generation. Factory color shown.

Suzuki Landy wrap colors and ideas

  • Landy black wrap
  • Landy white wrap
  • Landy gray wrap
  • Landy silver wrap
  • Landy red wrap
  • Landy blue wrap
  • Landy green wrap
  • Landy yellow wrap
  • Landy orange wrap
  • Landy purple wrap
  • Landy pink wrap
  • Landy teal wrap
  • Landy brown wrap
  • Landy gold wrap
  • Landy chrome wrap
  • Landy color shift wrap
  • Landy carbon fiber wrap
  • Landy camo and patterned wrap

How much vinyl to wrap a Suzuki Landy

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowvan (5 doors)184.6 in (4,690 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2010–2016van (5 doors)184.4 in (4,685 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2007–2010van (5 doors)183.1 in (4,650 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Landy wrap cost factors

Landy wrap cost depends on the size of the van, the film you pick and the condition of the paint. A first-generation Landy uses about 67 ft (20.5 m), while the newer two generations use about 69 ft (21 m) of 60-inch film. Chrome or patterned film raises the amount to about 79 ft (24 m). Older paint with chips or repainted panels adds preparation before the wrap.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (73.4 in (1,865 mm)): the roof is wrapped from a platform.

Landy wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Landy, third generation, factory photo
Factory color shown

2016–now Landy van (third generation)

2016–nowvan (5 doors)184.6 in (4,690 mm)

The third-generation Suzuki Landy has sliding side doors that decide where the film is cut. The door tracks stay bare, so the vinyl ends along their edges. This body from 2016 onward is 184.6 in (4,690 mm) long. A full wrap of this generation is estimated at about 69 ft (21 m) of standard film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.4 in (1,865 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Suzuki Landy, second generation, factory photo
Factory color shown

2010–2016 Landy van (second generation)

2010–2016van (5 doors)184.4 in (4,685 mm)

The second-generation Suzuki Landy was restyled in 2014, and bumpers and lights changed. Film cut for one version of this 2010–2016 van does not fit the other. The body length is 184.4 in (4,685 mm). A full wrap needs about 69 ft (21 m) of 60-inch film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.8 in (1,875 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Suzuki Landy, first generation, factory photo
Factory color shown

2007–2010 Landy van (first generation)

2007–2010van (5 doors)183.1 in (4,650 mm)

The first-generation Suzuki Landy from 2007–2010 may have panels that are original or repainted. Paint age matters on a car of these years, so a test spot comes before a full wrap. This generation is the shortest at 183.1 in (4,650 mm). It takes about 67 ft (20.5 m) of cast film for a full color change.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Landy

A partial wrap on a Landy can cover the roof, hood or mirror caps. Landy chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film option for the front end. These smaller jobs use less vinyl than a full wrap of the van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Suzuki Landy: body, cut-outs and film

A Suzuki Landy vinyl wrap is shaped by the van's size and five-door body. The current generation is 184.6 in (4,690 mm) long and 73.4 in (1,865 mm) tall. That height means the roof is wrapped from a platform. The sliding side doors add extra film along their long panels.

Landy wrap ideas start with the sliding side doors, where the tracks stay bare and the film is cut along them. The door handles, mirrors and badges need careful cut-outs or removal before they are wrapped. The tall roof of this van is reached from a platform. The large flat sides take printed designs well.

How much vinyl to wrap a Landy depends on which of the three generations you own. A first-generation Landy from 2007–2010 is the shortest at 183.1 in (4,650 mm) and needs about 67 ft (20.5 m) of 60-inch film. The second and third generations are nearly the same length, at 184.4 in and 184.6 in. Both of those take about 69 ft (21 m) of standard film.

Questions about wrapping a Suzuki Landy

How much vinyl does it take to wrap a Suzuki Landy?

Yes, a Suzuki Landy takes about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. If you choose chrome or patterned film, the amount is about 79 ft (24 m). The first generation uses slightly less, about 67 ft (20.5 m).

Are the sliding doors of a Landy wrapped?

Yes, the sliding doors of a Landy are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can still slide. The body estimate includes film for the sliding doors.

Can I wrap only the hood or the roof of a Landy?

Yes, you can wrap only the hood or the roof of a Landy. A partial wrap can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges. Clear paint protection film (PPF) is another option for the front end.

Is a Landy hard to wrap?

Yes, a Landy is hard to wrap for two reasons: the sliding doors and the tall body. The door tracks stay bare and force precise cutting along them. The roof height, up to 73.8 in (1,875 mm), means working from a platform. The large flat sides add more time and film.