Wraps by car

Suzuki Spacia wrap

The Suzuki Spacia wrap page covers the first generation van produced from 2013 to 2017. A full wrap of the newest Spacia body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film requires about 57 ft (17.5 m) of material.

1generations15.5 mof film for a full wrap

Suzuki Spacia, first generation, factory photo
Suzuki Spacia, first generation. Factory color shown.

Suzuki Spacia wrap colors and ideas

  • Spacia black wrap
  • Spacia white wrap
  • Spacia gray wrap
  • Spacia silver wrap
  • Spacia red wrap
  • Spacia blue wrap
  • Spacia green wrap
  • Spacia yellow wrap
  • Spacia orange wrap
  • Spacia purple wrap
  • Spacia pink wrap
  • Spacia teal wrap
  • Spacia brown wrap
  • Spacia gold wrap
  • Spacia chrome wrap
  • Spacia color shift wrap
  • Spacia carbon fiber wrap
  • Spacia camo and patterned wrap

How much vinyl to wrap a Suzuki Spacia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2017van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Spacia wrap cost factors

Spacia wrap cost depends on the size of this 133.7 in (3,395 mm) five-door van and the film you choose. A full color change wrap uses about 51 ft (15.5 m) of cast film, while chrome or patterned film uses about 57 ft (17.5 m). The sliding side doors and their bare tracks add cutting time. Partial jobs like the roof or hood use less material and less labor.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Spacia wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Spacia, first generation, factory photo
Factory color shown

2013–2017 Spacia van (first generation)

2013–2017van (5 doors)133.7 in (3,395 mm)

The first generation Spacia has sliding side doors and the tracks stay bare, which decides where the film is cut. The film stops at the track edges so the doors can still slide without catching. This adds a few straight cuts around each side of the van. The rest of the body is a simple five-door minivan shape.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Spacia

Not every Suzuki Spacia job is a full wrap: you can choose a partial wrap for the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end guards against stone chips. These smaller jobs use far less film and are quicker to install than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Suzuki Spacia: body, cut-outs and film

A Suzuki Spacia vinyl wrap covers a five-door van that is 133.7 in (3,395 mm) long. The tall, flat sides and simple contours make the body straightforward to film. The sliding side doors add extra cut lines along the tracks. Overall, this minivan uses less film than a larger SUV.

Spacia wrap ideas often begin with the sliding side doors, because their tracks stay bare and decide where the film is cut. The installer cuts the film along the door tracks to keep the mechanism clear. The door handles, mirrors, badges, and window trim need to be removed or cut around. The roof can be wrapped as a small separate job.

To find how much vinyl to wrap a Spacia, one generation only is in the catalog. The first generation body from 2013 to 2017 has the same five-door van shape. A full wrap of this body needs about 51 ft (15.5 m) of standard cast film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

Questions about wrapping a Suzuki Spacia

How much vinyl does it take to wrap a Suzuki Spacia?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) vinyl to wrap a Suzuki Spacia. If you are using chrome or patterned film, the amount goes up to about 57 ft (17.5 m) because of pattern matching and extra waste.

Are the sliding doors of a Spacia wrapped?

The sliding doors of a Spacia are wrapped, but the tracks stay bare. The film is cut along the door tracks so the mechanism can move freely. The rest of the door surface is covered normally.

Can I wrap only the hood or the roof of a Spacia?

Yes, you can wrap only the hood or the roof of a Spacia. The hood, roof, and mirror caps are common partial wrap choices. A smaller job like this uses less film and costs less than a full wrap.

Is a Spacia hard to wrap?

A Spacia is not especially hard to wrap because it is a small van with flat sides. The sliding side doors and their exposed tracks add some extra cutting and care. The film is cut along the door tracks to keep them clear. Overall, the size of 133.7 in (3,395 mm) means less film to handle than a large van.