Wraps by car

Suzuki Ignis wrap

The Suzuki Ignis wrap page covers all three generations of the subcompact hatchback. The newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. With chrome or patterned film, plan for about 57 ft (17.5 m) on the same body.

3generations15 mof film for a full wrap

Suzuki Ignis, third generation, factory photo
Suzuki Ignis, third generation. Factory color shown.

Suzuki Ignis wrap colors and ideas

  • Ignis black wrap
  • Ignis white wrap
  • Ignis gray wrap
  • Ignis silver wrap
  • Ignis red wrap
  • Ignis blue wrap
  • Ignis green wrap
  • Ignis yellow wrap
  • Ignis orange wrap
  • Ignis purple wrap
  • Ignis pink wrap
  • Ignis teal wrap
  • Ignis brown wrap
  • Ignis gold wrap
  • Ignis chrome wrap
  • Ignis color shift wrap
  • Ignis carbon fiber wrap
  • Ignis camo and patterned wrap

How much vinyl to wrap a Suzuki Ignis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowhatchback (5 doors)145.7 in (3,700 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2015–2020hatchback (5 doors)148.4 in (3,770 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2004–2007hatchback (3 or 5 doors)142.3 in (3,615 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Ignis wrap cost factors

An Ignis wrap cost depends on the size of the body, the film type, and the number of cut-outs and removed parts. A full wrap of the current model uses about 49 ft (15 m) of cast film, but chrome or patterned film takes about 57 ft (17.5 m). The roof rails, fog lamps, and tailgate glass add time to the installation. A two-tone factory roof on some trims means extra planning to keep or cover the split.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Ignis wraps by generation

Swipe sideways. Tap a card for the full description.

Suzuki Ignis, third generation, factory photo
Factory color shown

2020–now Ignis hatchback (third generation)

2020–nowhatchback (5 doors)145.7 in (3,700 mm)

The current Suzuki Ignis has a two-tone body from the factory on some trims. If you want one color, the wrap covers the second color of the roof. If you like the contrast, keep the roof unwrapped and wrap the rest of the body. Either choice changes how much film you use by a few feet.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Suzuki Ignis, second generation, factory photo
Factory color shown

2015–2020 Ignis hatchback (second generation)

2015–2020hatchback (5 doors)148.4 in (3,770 mm)

The second-generation Suzuki Ignis has roof rails on every trim. For a clean look, the rails come off before the roof is wrapped. If you leave them on, the film is cut along the rails and the edge is hidden under the rail feet. Removing the rails takes more time but gives a smoother roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Suzuki Ignis, first generation, factory photo
Factory color shown

2004–2007 Ignis hatchback (first generation)

2004–2007hatchback (3 or 5 doors)142.3 in (3,615 mm)

The first-generation Suzuki Ignis is from 2004–2007, so paint age matters. Panels may be original or repainted, and a test spot comes before a full wrap. Older paint can lift when the film is removed, so the surface must be checked first. This step adds time but prevents damage.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Ignis

A partial wrap on an Ignis includes the roof, hood, and mirror caps. Ignis chrome delete covers the window trim and badges with black film. Paint protection film (PPF) also works on the front end as a clear layer. These options use less film than a full wrap and can change the look without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Suzuki Ignis: body, cut-outs and film

A Suzuki Ignis vinyl wrap is manageable because the car is short, at 145.7 in (3,700 mm) for the current hatchback. The five-door body keeps panel sizes small, so one installer can handle the large roof section alone. The boxy shape means most surfaces are flat and need less stretching. Working in sections for the tailgate and rear bumper keeps the film under control.

For Ignis wrap ideas, the tailgate with the rear glass in it means the film ends at the edge of the glass. Every trim has roof rails that come off before the roof is wrapped, or the film is cut along them. Fog lamps in the front bumper on every trim require cut-outs in the bumper film. Some trims have a two-tone body from the factory, so the wrap either keeps the roof split or covers it.

To answer how much vinyl to wrap an Ignis, the three generations differ slightly in size. The first generation is the shortest at 142.3 in (3,615 mm) and needs about 48 ft (14.5 m) of film. The second generation is the longest at 148.4 in (3,770 mm) but takes the same amount as the current model. Buy the film for your exact generation because a few inches change the usable offcuts.

Questions about wrapping a Suzuki Ignis

How much vinyl does it take to wrap a Suzuki Ignis?

A Suzuki Ignis needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, use about 57 ft (17.5 m). This figure covers the current five-door hatchback with standard roof rails and fog lamps.

Can I wrap only the hood or the roof of an Ignis?

Yes, you can wrap only the hood or the roof of an Ignis. A partial wrap often includes the roof, hood, and mirror caps. The installer can cut the film to fit any single panel. Chrome delete on the window trim and badges is also an option.

Is an Ignis hard to wrap?

The Suzuki Ignis is not very hard to wrap, but a few parts add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has roof rails and fog lamps, so the rails come off or the film is cut along them, and the bumper needs cut-outs. The car's short length of 145.7 in (3,700 mm) keeps panels small and easy to handle.

How many generations of the Ignis does this page cover?

This page covers three generations of the Suzuki Ignis. They are the first generation from 2004–2007, the second from 2015–2020, and the third from 2020 onward. Each generation is a subcompact hatchback.