Wraps by car

Audi 50 wrap

The Audi 50 wrap page covers the first-generation Audi 50 produced from 1974 to 1978. This subcompact hatchback with three doors is the only generation in the catalog. A full vinyl wrap of the Audi 50 takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Audi 50, first generation, factory photo
Audi 50, first generation. Factory color shown.

Audi 50 wrap colors and ideas

  • Audi 50 black wrap
  • Audi 50 white wrap
  • Audi 50 gray wrap
  • Audi 50 silver wrap
  • Audi 50 red wrap
  • Audi 50 blue wrap
  • Audi 50 green wrap
  • Audi 50 yellow wrap
  • Audi 50 orange wrap
  • Audi 50 purple wrap
  • Audi 50 pink wrap
  • Audi 50 teal wrap
  • Audi 50 brown wrap
  • Audi 50 gold wrap
  • Audi 50 chrome wrap
  • Audi 50 color shift wrap
  • Audi 50 carbon fiber wrap
  • Audi 50 camo and patterned wrap

How much vinyl to wrap an Audi 50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1978hatchback (3 doors)138.2 in (3,510 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Audi 50 wrap cost factors

The Audi 50 wrap cost depends on the small size and simple shape of this car. Paint condition varies on a car from 1974–1978, and a test spot may be needed before the full wrap. More film or pattern choices also change the amount of material used.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Audi 50 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi 50, first generation, factory photo
Factory color shown

1974–1978 Audi 50 hatchback (first generation)

1974–1978hatchback (3 doors)138.2 in (3,510 mm)

The first-generation Audi 50 from 1974–1978 is a subcompact hatchback with three doors. Paint age matters on a car of these years, where panels may be original or repainted. A test spot comes before a full wrap to check adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on an Audi 50

A partial wrap on an Audi 50 can cover the roof, hood, or mirror caps. Audi 50 chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied to the front end in clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Audi 50: body, cut-outs and film

The Audi 50 vinyl wrap is sized by its compact hatchback body with three doors. The car measures 138.2 in (3,510 mm) long, which keeps film use modest. The three-door layout means the rear side panels are shorter than on a five-door car.

For Audi 50 wrap ideas, the tailgate has the rear glass in it, so the film ends at the edge of the glass. Each of the two long side doors is one large piece of film. No extra cut-outs are needed on this body.

To know how much vinyl to wrap an Audi 50, use the single generation's dimensions. The 1974–1978 body stays the same shape across all years. This generation needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Questions about wrapping an Audi 50

How much vinyl does it take to wrap an Audi 50?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap an Audi 50. This estimate is for a full wrap of the first-generation hatchback. The compact size keeps the material use low.

Can I wrap only the hood or the roof of an Audi 50?

Yes, you can wrap only the hood or the roof of an Audi 50. A partial wrap can also cover mirror caps. The roof and hood are separate panels that can be wrapped without doing the whole car.

Is an Audi 50 hard to wrap?

An Audi 50 is not especially hard to wrap, but the tailgate needs care because the rear glass is in it. The two long side doors are each one large piece of film, which makes them straightforward. The small size reduces the amount of film to handle.

How many generations of the Audi 50 does this page cover?

This page covers one generation of the Audi 50, the first generation from 1974–1978. No other generations are listed in the catalog.